• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.367-377
• /
• 2017

This study examined the effects of the salinity of seafood wastewater on the sulfur denitrification process. An examination of the denitrification efficiency showed that the optimal EBCT was 1hr at an influent T-N concentration of 20mg/L or lower and 2-3hr at an T-N concentration of 30mg/L. An examination of the denitrification efficiency according to the nitrogen load showed that the legal effluent water quality criterion was satisfied when the influent load was maintained within $0.496kg/m^3/day$. On the other hand, the reactor volume increased when this was applied to the site. Therefore, the influent load should be within $0.372kg/m^3/day$ considering the denitrification and economic efficiency. At a load of $0.248{\sim}0.628kg/m^3{\cdot}day$, the k value was $0.0890{\sim}0.5032hr^{-1}$. The batch experimental results according to the $Cl^-$ concentration showed that at an influent nitrogen concentration of 30.0mg/L, the effect of the denitrification efficiency was not large below the salinity of $7,000mgCl^-/L$, but inhibition occurred above $9,000mgCl^-/L$. Calculations of the reaction rate constant according to the $Cl^-$ concentration showed that the reaction rate constant was $0.1049{\sim}0.2324hr^{-1}$ at a raw wastewater concentration of ${\sim}5,000mgCl^-/L$. In contrast, the k value was $0.1588hr^{-1}$ at $7,000mgCl^-/L$ and $0.1049hr^{-1}$ at $9,000mgCl^-/L$.

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.293-303
• /
• 2012

Recently, as construction technology improved, concrete structures not only became larger, taller and longer but were able to perform various functions. However, if extreme loads such as impact, blast, and fire are applied to those structures, it would cause severe property damages and human casualties. Especially, the structural responses from extreme loading are totally different than that from quasi-static loading, because large pressure is applied to structures from mass acceleration effect of impact and blast loads. Therefore, the strain rate effect and damage levels should be considered when concrete structure is designed. In this study, the low velocity impact loading test of steel fiber reinforced concrete (SFRC) slabs including 0%~1.5% (by volume) of steel fibers, and strengthened with two types of FRP sheets was performed to develop an impact resistant structural member. From the test results, the maximum impact load, dissipated energy and the number of drop to failure increased, whereas the maximum displacement and support rotation were reduced by strengthening SFRC slab with FRP sheets in tensile zone. The test results showed that the impact resistance of concrete slab can be substantially improved by externally strengthening using FRP sheets. This result can be used in designing of primary facilities exposed to such extreme loads. The dynamic responses of SFRC slab strengthened with FRP sheets under low velocity impact load were also analyzed using LS-DYNA, a finite element analysis program with an explicit time integration scheme. The comparison of test and analytical results showed that they were within 5% of error with respect to maximum displacements.

• Korean Journal of Remote Sensing
• /
• v.24 no.2
• /
• pp.189-194
• /
• 2008

Middle-infrared (MIR) spectral region between 3.0 and $5.0\;{\mu}m$ in wavelength is useful for observing high temperature events such as volcanic activities and forest fire. However, atmospheric effects and sun irradiance in day time has not been well studied for this MIR spectral band. The objectives of this basic study is to evaluate atmospheric effects and eventually to estimate surface temperature from a single channel MIR image, although a typical approach utilize split-window method using more than two channels. Several parameters are involved for the correction including various atmospheric data and sun-irradiance at the area of interest. To evaluate the effect of sun irradiance, MODIS MIR images acquired in day and night times were used for comparison. Atmospheric parameters were modeled by MODTRAN, and applied to a radiative transfer model for estimating the sea surface temperature. MODIS Sea Surface Temperature algorithm based upon multi-channel observation was performed in comparison with results from the radiative transfer model from a single channel. Temperature difference of the two methods was $0.89{\pm}0.54^{\circ}C$ and $1.25{\pm}0.41^{\circ}C$ from the day-time and night-time images, respectively. It is also shown that the emissivity effect has by more largely influenced on the estimated temperature than atmospheric effects. Although the test results encourage using a single channel MR observation, it must be noted that the results were obtained from water body not from land surface. Because emissivity greatly varies on land, it is very difficult to retrieval land surface temperature from a single channel MIR data.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• The Journal of Engineering Geology
• /
• v.7 no.3
• /
• pp.191-205
• /
• 1997

Measurements on subsurface movement of the Songsanri tomb site including the Muryong royal tomb was conducted using a tiltmeter system for the period of 15 months form July 7, 1996 to September 30, 1997. Two coordinate tilt monitoring data shows the biggest movement rate of 2.3mm/m/yr toward south in the frontal wall(N-S tilt) of the Muryong royal tomb. Southward tilting of bricks above the southern fire place in the western wall of the Muryong royal tomb is a proof of southward tilting of the royal tomb since its excavation in 1971. The eastern wall of the Muryong royal tomb is also tilting toward inside the tomb with the rate of 1.523mm/m/yr. Furthermore, tilting rate of wall increases twice in rainy season. It is interpreted tbat infiltration of water into the tomb and nearby ground in rainy season results in dangerous status for the safety of tomb structure. On the whole, normal component tilting of the walls of the 5th tomb is large than its shear component. It shows a small displacement toward one direction without no abrupt change in its direction and amount of tilting. The tilting rate of walls of the 6th tomb is about 8.8mm/m/yr in the dry season which is much bigger than those of other tombs in rainy season. Deformation events of walls of the tombs are closely related to amount of precipitation and variation of temperature. In comparison with different weather conditions, tilting is much bigger during the period of rainy weather than sunny weather. It is interpreted that rainwater flew into the turm through faults and nearby ground. High water content in nearby ground resulted strength of ground. The tilting event of walls shows a hysterisis phenomenon in analysis of temperature effect on tilting event. The walls tilt rapidly with steep rising of temperature, but the tilted walls do not come back to original position with temperature falling. Therefore, a factor of steep increase of the temperature must be removed. It means the tomb have to be kept with constant temperature. The observation of groundwater level using three boreholes located in construction site and original ground represented that groundwater level in construction site is higher than that of original ground during the rainy season from the end of June to August. It means that the drainage system of the Muryong royal tomb is worse than original ground, and it is interpreted that the poor drainage system is related to safety of tomb structure. As above mentioned, it is interpreted that artificial changes of the tomb environment since the excavation, infiltration of rainwater and groundwater into the tomb site and poor drainage system had resulted in dangerous situation for the tomb structure. According to the result of the long period observation for the tomb site, it is interpreted that protection of the tomb site from high water content should be carried out at first, and the rise of temperature by means of the dehumidifier inside the tomb must be removed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.7
• /
• pp.492-507
• /
• 2010

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2009. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery and piping, and new and renewable energy. Various topics were covered in the field of general thermal and fluid flow such as an expander, a capillary tube, the flow of micro-channel water blocks, the friction and anti-wear characteristics of nano oils with mixtures of refrigerant oils, etc. Research issues mainly focused on the design of micro-pumps and fans, the heat resistance reliability of axial smoke exhaust fans, and hood systems in the field of fluid machinery and piping. Studies on ground water sources were executed concerning two well type geothermal heat pumps and multi-heat pumps in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included the heat transfer in thermoelectric cooling systems, refrigerants, evaporators, dryers, desiccant rotors. In the area of industrial heat exchangers, researches on high temperature ceramic heat exchangers, plate heat exchangers, frosting on fins of heat exchangers were performed. (3) In the field of refrigeration, papers were presented on alternative refrigerants, system improvements, and the utilization of various energy sources. Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and $CO_2$ were studied. Efforts to improve the performance of refrigeration systems were made applying various ideas of suction line heat exchangers, subcooling bypass lines and gas injection systems. Studies on heat pump systems using unutilized energy sources such as river water, underground water, and waste heat were also reported. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. In the area of cogeneration systems, papers on energy and economic analysis, LCC analysis and cost estimating were reported. Studies on ventilation and heat recovery systems introduced the effect on fire and smoke control, and energy reduction. Papers on district cooling and heating systems dealt with design capacity evaluation, application plan and field application. Also, the maintenance and management of building service equipments were presented for HVAC systems. (5) In the field of architectural environment, various studies were carried to improve indoor air quality and to analyze the heat load characteristics of buildings by energy simulation. These studies helped to understand the physics related to building load characteristics and to improve the quality of architectural environment where human beings reside in.

• The Korean Journal of Emergency Medical Services
• /
• v.15 no.1
• /
• pp.5-23
• /
• 2011

Objective : This study grasps specific task on paramedics who plays a great role in the emergency scene, thereby eliciting definition of job called paramedics and analyzing occupation by DACUM method. Thus, the aim is to suggest working-level guidelines on the task of paramedics. Methods : It targeted paramedics who are working at hospitals, fire stations, and industries in Seoul and Gyeonggi area from Oct. 11, 2010 to Nov. 30. A total of 608 copies of questionnaire were analyzed by DACUM method. A research tool on occupational analysis consisted of 8 pieces for duty, 43 pieces for task, and 149 pieces for task elements. In order to survey performance frequency, importance, and difficulty by element, each task was developed by this research team, and each task was analyzed and finally elicited through workshop of DACUM method. Results : The occupational definition of paramedics, which was defined through this DACUM, was elicited as 'professional job of performing emergency medical care on the scene, during transferring, or within medical institution in order to maintain life and prevent wound deterioration, targeting a person who is put in emergency situation.' Task element, whose performance frequency was indicated to be the highest, was in order of checking mental status($2.76{\pm}0.497$), checking vital signs($2.70{\pm}0.578$), and airway/c-spine immobilization($2.69{\pm}.546$). Especially, defibrillation stood at $2.23{\pm}.655$ points. Task element, whose performance frequency was low, was in order of caring sexual abuse victims($1.32{\pm}0.563$), performing cricothyrotomy($1.36{\pm}0.618$), and caring cardiac arrest victims($1.40{\pm}0.636$). Importance of task was in order of airway/c-spine immobilization ($2.88{\pm}0.338$), maintenance of respiration($2.88{\pm}0.351$), caring cardiac arrest victims($2.87{\pm}0.349$), and performing CPR($2.87{\pm}0.361$). Task element, whose importance is low, was indicated to be in order of enema($2.29{\pm}0.736$), urinary catheterization($2.35{\pm}0.664$), and nasogastric intubation($2.35{\pm}0.667$). Task element, whose difficulty was shown to be the highest, was indicated to be in order of caring cardiac arrest victims during pregnancy ($2.60{\pm}0.559$), caring cardiovascular injury($2.59{\pm}0.546$), and labor management($2.53{\pm}0.533$). Conclusion : Based on the results of this study, the job performance work table(Dacom chart) of paramedics is suggested to be used, thereby being applied to development in education and curriculum of paramedics. It is necessary to evaluate usefulness of the job performance work table by estimating effect of education for paramedics based on the job performance work table of paramedics.

• Korean Journal of Agricultural Science
• /
• v.10 no.2
• /
• pp.310-323
• /
• 1983

To study the effect of foaming agent on the production and property of light weight concrete, the tests of compressive, tensile, bending strengths and absorption rates of mortar were done under the different mixing ratio with J, A and D foaming agents. The results obtained were summarized as follows : 1. The strengths were decreased in richer mixing ratio and more addition of foaming agent. The decrease of strengths was the greatest at the level of 0.75% of foaming agent. The decreasing rate of strengths was in order of J, A and D foaming agent. 2. At the mixing ratio of 1:1, ${\sigma}_{28}$ and 0.75% of foaming agent, the compressive strength was decreased up to 34.9% by D, 47.8% by A and 86.8% by J foaming agent, respectively, the tensile strength was decreased up to 14.8% by D, 20.2% by A and 77.9% by J foaming agent, respectively, bending strength was decreased up to 19.9% by D, 35.0% by A and 79.1% by J foaming agent, respectively. The decrease of compressive strength was more severe than that of tensile and bending strengths. 3. The absorption rates were increased in poorer mixing ratio and more addition of foaming agent. The absorption rate was significantly higher at the early stage of immersed water. The absorption rate was in order of J, A and D foaming agent. 4. The decrease of strengths was inevitable in cement-mortar with foaming agent, but the cement mortar with foaming agent has such the properties of the light-weight, lnsulation, Keeping-warmth, sound proof and fire-proof that if could be utilized to the constructions which need low strengths.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.3
• /
• pp.42-59
• /
• 2014

Han Pilgyo (1807~1878) was a scholar-official in the later period of the Joseon Dynasty. The research results on spatial structure and landscape techniques of the central government office reviewed through the Sukcheonjeado(宿踐諸衙圖) album collection edited by Han Pilgyo are as follows. First, Sukcheonjeado(宿踐諸衙圖) using Sabangjeondomyobeob(四方顚倒描法, a Korean traditional drawing type) is uniquely proven historical data which helps to understand the spatial structure of the center and local government offices and the characteristics of cultural landscape. Secondly, the central government office located in Yookcho(六曹) Street which is the outside Gwanghwamun(光化門) of the Main Palace(Gyeongbokgung, 景福宮) of the Joseon Dynasty has a center facility(Dangsangdaecheong, 堂上大廳) and attached buildings which are distributed from high to low or from left to right, according to its order of presidency in square-shaped portion of land. The main building was located facing south and by considering the administrative convenience, the environmental effect and the practice of Confucian norms this structure reflects a hierarchical landuse system. Thirdly, the main buildings such as Dangsangdaecheong and Hyangcheong(鄕廳), which are the working place for government officials had large square front yards for constructing a practical patio garden. The back garden was tended to reflect the meaning landscape, with such as pond and pavilion. A particular point was the repeated crossing of active space and passive space(movement and stillness, building and yard, yard and garden), which implements the Yin-Yang principle. Fourth, the characteristics that can be extracted from the central government office landscapes are (1) expandability of outdoor space, connects of front gardens, emphasizes the characteristic of serviceable gardens and back gardens, which in turn emphasizes scenic sides, (2) introduction of water features(square-shaped ponds) that can be used as fire-water and considers environmental-amenity and landscape characteristics, (3) introduction of pavilions for relaxation, mental and physical discipline, and the development of back gardens, (4) significance of Jeongsimsoo(庭心樹) in such things as selection of concise landscape plants like lotus, willow, pine, zelkova and so on, and limited plant introduction, (5) environmental design techniques which set importance on not only aesthetics and ideality but also practical value. Thus, these aspects of the government office landscape can be said to be the universality and particularity of Korean traditional landscape technique and can be extracted similarly in the palaces, temples, lecture halls, and houses of the upper class of the Joseon Dynasty.

• Korean Security Journal
• /
• no.36
• /
• pp.387-416
• /
• 2013

This study's purpose is to present the improvement of effectiveness of security activity for international conference which can be held hereafter. On the basis of security activity problems originating in G20 summit meeding that had been held in Seoul in 2010. I made up questions three times to on the members of the police, military, fire figher and national intelligence service who had experienced in Seoul G20 summit meeding and recognition of possible problem and possibility of improvement on each item of questions was analyzed by Delphi Method. Also interviews with 4 security experts selected from each security agency were conducted to present improvement in each part of problem. The results obtained from the face to face interview with four experts of security-enforcement agency about the role of event site activity stage for international conference are as followings; First, 'security protocol section' protocol and security are needed mutual win-win enough to be compared with adaptative relationship, thereby being demanded the closer cooperation and information exchange. Second, 'situation management section' there is a need of reinforcing the cooperative system between situation rooms of each agency in order to possibly operate all of the security manpower integrally, which are dispersed by function and by event site, in addition to the swift and organic information exchange between wide-area local government and all the security agencies focusing on a preparation planning group. Third, 'security manpower resource management section' there is a need of encouragement and interest in the leadership in order to devise system that all of the security manpower can concentrate on event and to be possibly satisfied the given conditions. Fourth, 'local government cooperative support section' the wide-area local government of a hosting city as international city operates several kinds of the facilities for international conference, supports operation of conference, achieves a ripple effect of event such as tourism, maximizes service of accomodations, and performs the primary responsibility for the maintenance of the traffic facilities, thereby needing to execute special inspection under the responsibility of Si-Do governors.