1967년 Wegener등과 Khang등이 각각 구조 및 동작원리가 다른 비휘발성 반도체 메모리(nonvolatile semiconductor memory)를 최초로 개발, 도입한 이후 3세대째를 보내고 있는 현재, 메모리는 반도체산업의 선봉으로써 여전히 공정기술(processing technology)을 이끌며, 시장점유율, 응용범위등에서 주도적 위치를 차지하고 있다. 한편, 최근의 컴퓨터 시스템은 소형화, 저전력화, 고속화, 내충격성 등 기술적 측면에서 뿐만 아니라 소프트웨어적으로도 급격히 발전하고 있다. 이에 따라 메모리부분에 있어서도 기존의 자기 하드디스크 메모리(magnetic hard disk memory)의 한계를 극복하기 위해서 반도체 메모리로서 대체가 더욱 요구되고 있다. 이와같은 상황에서 EEPROM(electrically erasable and programmable ROM)은 상주 시스템내에서도 전기적 방법에 의해 사용자가 임으로 기록/소거(write/erase)할 수 있을 뿐만 아니라 전원이 제거된 상테에서도 기억상태를 유지할 수 있는 비휘발성이라는 점에서 차세대 반도체 메모리 부문의 주역으로서 주목받고 있다. 따라서, 본 고에서는 20세기를 보내며 반도체메모리의 새로운 장을 열어가는 EEPROM의 기술현황 및 전망에 관해 살펴보고자 한다.
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
한국전기전자재료학회 1994년도 춘계학술대회 논문집
/
pp.127-129
/
1994
For scale-down EEPROM, MONOS structures with the different thicknesses of gate insulators, are fabricated and the memory characteristics, such as swtching and retention characteristics are investigated. As a results, the devices with the top oxide of 20A thick were deteriorated in retentivity. However, 11V-programmable voltage for ΔV$\sub$FB/=4V and 10-year data retention were achieved in MONOS structure with the t7p oxide of 50 ${\AA}$ thick and nitride 45${\AA}$thick.
UICC는 애플리케이션, 파일 시스템, 보안 메커니즘, 암호 알고리즘 등을 포함하고 있는 일종의 스마트 카드이다. UICC의 파일은 ISO7816-4 표준에서 정의한 파일들과 애플리케이션의 최상 위 파일인 Application Dedicated file등이 있다. UICC가 자바 카드 기반에서 구현되 었을 때 모든 파일은 객체로서 구체화될 수 있다. 이 때 각 파일 객체는 파일에 대한 정보들과 정보 조작과 관련된 메소드를 제공하게 된다. 자바 카드는 일반 컴퓨터와 유사하지만 제한적인 메모리와 처리속도 등으로 인하여 구현 상 많은 제약사항이 따른다. 자바카드는 저장 공간을 ROM, RAM, EEPROM로 구분할 수 있으며, 파일이나 애플릿, 데이터 등은 EEPROM 영역에 저장된다. 하지만 자바 카드가 지원하는 EEPROM영역이 2.2.1 버전에서 확장되었다 할지라도 여전히 많은 데이터를 저장하기에는 부족한 메모리 공간을 갖는다. 이것은 메모리 사용에 있어 신중을 기해야 한다는 것을 의미하며 효율적인 메모리 사용은 카드 사용자에게 보다 많은 가용 메모리를 제공할 수 있다는 점에서 중요하다. 본 논문에서 는 이러한 점을 고려하여 자바 카드에서 UICC의 파일 시스템을 Linked List 방식을 이용하여 구현하는 방법과 배열을 이용하여 구현하는 방법을 제시하고 파일 시스뎀의 전체적인 구조를 효율적으로 구성하는 방법을 제시한다.
Journal of the Korean Institute of Telematics and Electronics D
/
제36D권10호
/
pp.9-16
/
1999
When the conventional IPD (inter-poly-dielctrics) layer with ONO(oxide-nitride-oxide) structure was used in the Flash EEPROM cell, its data retention characteristics were significanfly degraded because the top oxide of the ONO layer was etched off due to the cleaning process used in the gate oxidation process for the peripheral MOSFETs. When the IPD layer with the ONON(oxide-nitride-oxide-nitride) was used there, however, its data retention characteristics were much improved because the top nitride of the ONON layer protected the top oxide from being etched in the cleaning process. For the modelling of the data retention characteristics of the Flash EEPROM cell with the ONON IPD layer, the decrease of the threshold voltage cue to the charge loss during the bake was here given by the empirical relation ${\Delta}V_t\; = \;{\beta}t^me^{-ea/kT}$ and the values of the ${\beta}$=184.7, m=0.224, Ea=0.31 eV were obtained with the experimental measurements. The activation energy of 0.31eV implies that the decrease of the threshold voltage by the back was dur to the movement of the trapped electrons inside the inter-oxide nitride layer. On the other hand, the results of the computer simulation using the model were found to be well consistent with the results of the electrical measurements when the thermal budget of the bake was not high. However, the latter was larger then the former in the case of the high thermal budger, This seems to be due to the leakage current generated by the extraction of the electrons with the bake which were injected into the inter-oxide niride later and were trapped there during the programming, and played the role to prevent the leakage current. To prevent the generation of the leakage current, it is required that the inter-oxide nitride layer and the top oxide layer be made as thin and as thick as possible, respectively.
Journal of the Korean Institute of Telematics and Electronics D
/
제36D권11호
/
pp.56-62
/
1999
All the cells on the whole memory array or a block of the memory array in the Flash EEPROM's are erased at the same time using Fowler-Nordheim (FN) tunneling. some of the cels are often overerased since the tunneling is not a self-limited process. In this paper, the optimum doping concentration of the floating gate solve the overerase problem has been studied. For these studies, N-type MOSFETs and MOS capacitors with various doping concentrations of the gate polysilicon have been fabricated and their electrical characteristics have been measured and analyzed. As the results of the experiment, it has been found that the overerase problem can be prevented if the doping concentration of the floating gate is low enough (i.e. below $1.3{\times}10^{18}/cm^3$). It is because the potential difference between the floating gate and the source is lowered due to the formation of the depletion layer in the floating gate and thus the erasing operation stops by itself after most of the electrons stored in the floating gate are extracted. On the other hand, the uniformity of the Vt and the gm has been significantly poor if the coping concentration of the floating, gate is too much lowered (i.e. below $1.3{\times}10^{17}/cm^3$), which is believed to be due to nonuniform loss of the dopants from the nonuniform segregation in the floating gate. Consequently, the optimum doping concentration of the floating gate to suppress the overerase problem and get the uniform Vt and has been found to range from $1.3{\times}10^{17}/cm^3$ to $1.3{\times}10^{18}/cm^3$ in the Flash EEPROM.
Journal of the Institute of Electronics Engineers of Korea SD
/
제38권5호
/
pp.55-55
/
2001
개의 N과 P채널 EEPROM을 이용하여 A/D 변환기를 설계하였다. 프로그래밍 모드에서 EEPROM의 선형적 저장능력을 관찰하기 위해 MOSIS의 1.2㎛ double-poly CMOS 공정을 이용하여 셀이 제작되었다. 그 결과 1.25V와 2V구간에서 10㎷ 미만의 오차 내에서 셀이 선형적으로 프로그램 되는 것을 보았다. 이러한 실험 결과를 이용하여 프로그램 가능한 A/D 변환기의 동작이 Hspice에서 시뮤레이션 되었으며, 그 결과 A/D 변환기가 37㎼의 전력을 소모하고 동작주파수는 333㎒ 정도인 것으로 관찰되었다.
Proceedings of the Korea Multimedia Society Conference
/
한국멀티미디어학회 2004년도 춘계학술발표대회논문집
/
pp.354-357
/
2004
자바는 스마트 카드 상의 다중 애플리케이션 기능을 지원하기 위한 가장 유용한 프로그래밍 언어이다. $\lrcorner$CVM(Java Card Virtual Machine)은 자바 언어로 작성된 프로그램들을 스마트 카드 상에서 동작 가능하게 한다. 현재 스마트 카드는 작은 프로세서를 가지고 있으며 이런 제한적인 환경에서의 JCVM 성능 향상은 매우 중요한 이슈 중의 하나이다 그리고 기존의 스마트 카드는 쓰기 속도가 느린 EEPROM에 객체를 생성하여 사용함으로 JCVM의 성능 저하를 가져왔다. 본 논문에서는 스마트 카드 메모리 관리, 즉, EEPROM에서 RAM으로 객체를 이동시킴으로써 JCVM 성능을 보다 향상시키는 알고리즘에 관해 제안하고자 한다.
Kim, Ju-Yeon;Kim, Byeong-Cheol;Kim, Seon-Ju;Seo, Gwang-Yeol
The Transactions of the Korean Institute of Electrical Engineers C
/
제49권1호
/
pp.1-7
/
2000
The SNOSFET memory devices with ultrathin ONO(tunnel oxide-nitride-blocking oxide) gate dielectric were fabricated using n-well CMOS process and investigated its characteristics. The thicknesses of tunnel oxide, nitride and blocking oxide were $23{\AA},\; 53{\AA}\; and\; 33{\AA}$, respectively. Auger analysis shows that the ONO layer is made up of $SiO_2(upper layer of blocking oxide)/O-rich\; SiO_x\N\_y$. It clearly shows that the converting layer with $SiO_x\N\_y(lower layer of blocking oxide)/N-rich SiO_x\N\_y(nitride)/O-rich SiO_x\N\_y(tunnel oxide)$. It clearly shows that the converting layer with $SiO_x\N\_y$ phase exists near the interface between the blocking oxide and nitride. The programming condition of +8 V, 20 ms, -8 V, 50 ms is determined and data retention over 10 years is obtained. Under the condition of 8 V programming, it was confirmed that the modified Fowler-Nordheim tunneling id dominant charge transport mechanism. The programmed threshold voltage is distributed less than 0.1 V so that the reading error of memory stated can be minimized. An $8\times8$ NAND type flash EEPROM with SONOSFET memory cell was designed and simulated with the extracted SPICE parameters. The sufficient read cell current was obtained and the upper limit of $V_{TH}$ for write state was over 2V.
Kim, Meong-Seok;Jeong, Woo-Young;Park, Heon;Ha, Pan-Bong;Kim, Young-Hee
Proceedings of the Korean Institute of Information and Commucation Sciences Conference
/
한국정보통신학회 2013년도 추계학술대회
/
pp.375-378
/
2013
A reference voltage generator which is insensitive to PVT (process-voltage-temperature) variation necessary for NVM memory IPs such as EEPROM and MTP memories is designed in this paper. The designed BGR (bandgap reference voltage) circuit based on MagnaChip's $0.18{\mu}m$ EEPROM process uses a low-voltage bandgap reference voltage generator of cascode current-mirror type with a wide swing and shows a reference voltage characteristic insensitive to PVT variation. The minimum operating voltage is 1.43V and the VREF sensitivity against VDD variation is 0.064mV/V. Also, the VREF sensitivity against temperature variation is $20.5ppm/^{\circ}C$. The VREF voltage has a mean of 1.181V and its three sigma ($3{\sigma}$) value is 71.7mV.
Kim, Jeung-Seop;Cho, Byoung-Ho;Kim, Hyo-Cheol;Lee, Jong-Kook;Yoo, Ki-Young
Journal of KIISE:Computing Practices and Letters
/
제8권3호
/
pp.277-288
/
2002
In this paper, we describe a design and implementation method of a smart card operating system for multi applications. A smart card is the independent computing system and is able to be used in multi applications such as the electronic commerce and the electronic cash. Smart card operation system(SCOS) provides a basis of smart card booting, and controls and manages application programs. SCOS can produce and control a file system to support multi applications in EEPROM, communicate commands and messages with outside devices, process a command, produce a reply message, and provide security functions of file security in EEPROM, and communication security. Therefor, in this paper, we design and implement SCOS system that provides the authentication between a card and a terminal, the session authentication for multi applications, the processing of commands, and the maintenance of the security.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.