• Journal of Climate Change Research
• /
• v.4 no.4
• /
• pp.331-348
• /
• 2013

The frequency and intensity of abnormal climate caused by climate change is increasing in Korea. Also, the amount of damage from disaster is increasing rapidly. The research on vulnerability assessment analyzes environmentally, socially and economically vulnerable indicators and is ongoing to reduce the intensity of damage and establish adaptation policies for climate change. Therefore, in this study, we assessed vulnerability using weighting value derived by the regression equation. There are 3 evaluation items : vulnerability assessment for farmland erosion to flood, vulnerability assessment for health to heat wave, vulnerability assessment for forest fire to drought. For this study, indicators for each sectors were selected and spatial data for each sectors were established using GIS program. Results showed that vulnerability to heat wave was more affected by climate factors. On the other hand, vulnerability to flood and drought was more affected by social-economic factors. Then, to analysis efficiency of the regression analysis, vulnerability result was compared between the existing vulnerability research with no weighting applied and the vulnerability research with the influence of weighting value derived by the regression. This study showed that the regression analysis is efficient to provide practical and feasible alternatives in terms of planning climate change adaptation policies and it is expected to be utilized for vulnerability assessment in the future.

• Earthquakes and Structures
• /
• v.15 no.6
• /
• pp.667-685
• /
• 2018

In eccentrically braced steel frames (EBFs), the links are fuse members which enter inelastic phase before other structure members and dissipate the seismic energy. Based on the force-based seismic design method, damages and plastic deformations are limited to the links, and the main structure members are required tremendous sizes to ensure elastic with limited or no damage. Force-based seismic design method is very common and is found in most design codes, it is unable to determine the inelastic response of the structure and the damages of the members. Nowadays, methods of seismic design are emphasizing more on performance-based seismic design concept to have a more realistic assessment of the inelastic response of the structure. Links use ordinary steel Q345 (the nominal yielding strength $f_y{\geq}345MPa$) while other members use high strength steel (Q460 $f_y{\geq}460MPa$ or Q690 $f_y{\geq}690MPa$) in eccentrically braced frames with high strength steel combination (HSS-EBFs). The application of high strength steels brings out many advantages, including higher safety ensured by higher strength in elastic state, better economy which results from the smaller member size and structural weight as well as the corresponding welding work, and most importantly, the application of high strength steel in seismic fortification zone, which is helpful to popularize the extensive use of high strength steel. In order to comparison seismic behavior between HSS-EBFs and ordinary EBFs, on the basis of experimental study, four structures with 5, 10, 15 and 20 stories were designed by PBSD method for HSS-EBFs and ordinary EBFs. Nonlinear static and dynamic analysis is applied to all designs. The loading capacity, lateral stiffness, ductility and story drifts and failure mode under rare earthquake of the designs are compared. Analyses results indicated that HSS-EBFs have similar loading capacity with ordinary EBFs while the lateral stiffness and ductility of HSS-EBFs is lower than that of EBFs. HSS-EBFs and ordinary EBFs designed by PBSD method have the similar failure mode and story drift distribution under rare earthquake, the steel weight of HSS-EBFs is 10%-15% lower than ordinary EBFs resulting in good economic efficiency.

• Journal of Korea Technology Innovation Society
• /
• v.22 no.2
• /
• pp.159-185
• /
• 2019

Chemical industry, as one of the basis industries of the country, is characterized by converged high-end technology and large scale capital investment. In 2018, the government announced "The Strategy for Chemical Industry Development" with the vision of 'An Upgrade to the Advanced Chemical Industry'. In the meantime, the advanced chemical industry in Korea has been developed not by its own R&D, but by the upgrading of technologies and processes through the technology transfer from developed countries. The method of technology transfer was mainly achieved with international joint ventures (hereafter IJV) linked with technology transferors from developed countries. As it is necessary to grasp the determinants of the technology transfer and their importance to promote the transfers through IJVs, this relative importance analysis study was conducted by using the method of quantifying experts' opinions (AHP) on the determinants of the technology transfer of both parties. As a result of the analysis, in the Hierarchy1(PEST factors), the technology transferees focus on economic factors such as 'profitability of technology transfer' and 'cost efficiency', while technology transferors considered technical factors such as 'operational excellence (abilities to continuously improve technology process)'. In addition, transferors and transferees have different priorities for technology transfer determinants in all areas of Hierarchy 2 (sub-determinants). This suggests that Korean government or enterprise should shift the policy direction toward 'technology-oriented' when they promote advanced-technology transfer through IJVs.

• Journal of Technology Innovation
• /
• v.27 no.1
• /
• pp.1-43
• /
• 2019

The significance of SMEs (small and medium-sized enterprises) is gradually highlighted as we have entered the age of "New Normal." The South Korean government support these enterprises to boost economic growth and create more jobs. It also releases numerous policies such as national R&D projects and expanding tax incentive services particularly aiming at promoting dramatic investment in R&D and technological innovation. There is a sharp contrast regarding the efficiency of direct or indirect supports for encouraging R&D investment launched by SMEs depending on researchers. However, there has been little attempt to explore the optimal combination of two policy tools. Amid promoting affiliated governmental departments in charge of SMEs policies and constantly growing R&D investment, it is an appropriate time to discuss the medium and long-term direction for the optimal policy mix of direct and indirect supports. In this study, the author obtained 32 relevant studies published earlier in the domestic journals, explored literatures more systematically, and further conducted a meta-analysis. It is dedicated to summarizing relevant controversies and organizes them empirically beyond merely verifying whether policy support stimulates private R&D investment by SMEs. The meta-analysis showed that it would be effective to support as tax for large enterprises, while subsidiary support for SMEs. However, indirect support needs to be progressively increased as direct support primarily accounts for the entire R&D support for South Korean SMEs.

• Ecology and Resilient Infrastructure
• /
• v.6 no.2
• /
• pp.109-119
• /
• 2019

Eutrophication has occurred due to the inflow of various water pollutants in many Korean reservoirs with low depth, and algal blooms of surface layer and low oxygenation of deep layer have repeated every year. There are several existing technologies to alleviate the stratification of reservoirs, but it is difficult to apply them in field sites due to the necessity of electric power and low economic efficiency. In this study, a non-powered water circulation system using natural energy of wind and water flow has been developed, and two test-beds constructed in the reservoirs with different conditions and examined its field applicability. Through computational fluid dynamics (CFD) simulation, it has been shown that the water circulation system could induce the downward flow to mitigate the stratification between surface and deep layers, and its influence radius could reach about 30 m. As a result of long-term monitoring of the test-beds, various water quality improvement effects have been observed such as moderation of DO fluctuation by water circulation, reduction of DO supersaturation and prevention of excessive pH rising. In order to improve the applicability of the water circulation system, it is considered necessary to review countermeasures against flood and depth conditions of each reservoir.

• Industry Promotion Research
• /
• v.4 no.1
• /
• pp.79-86
• /
• 2019

The quality of service delivery by governments to their citizens is a subject of concern in the contemporary society. E-governance is a critical aspect that is transforming government operation and service delivery to citizens and other bodies through application of information technology. This research explores the state of e-governing focusing on nations that are developing with special attention to Pakistan. The difficulties and benefits encountered are identified. The results are vital for implementers of e-governing systems in these countries. The methodology applied entails a secondary research that involves analysis and synthesis of literature relating the research topic. The results reveal that Pakistan has made incredible steps in setting up e-governance systems with growth in internet use and access of data from a digital platform. The findings reveal that e-government is associated with multiple benefits including enhanced quality of services, cost efficiency in service provision, enhance transparency and elimination of corruption, provide the basis for eradication of poverty, boost economic stability of a country, and provide room for direct democracy. The research also found that developing countries experience challenges in form of financial constraints, poor ICT infrastructure, illiteracy on e-government, political consensus constraints, legal obstacles, social and cultural constraints. E-government has the capability to transform the quality of governance provided by governments, and policymakers and implementers should address the constraints that act as a hindrance to its implementation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.430-439
• /
• 2019

In this study, a nonlinear impact analysis was performed to evaluate the safety and damage of an eco-pillar debris barrier with a hollow cross-section, which was proposed to improve constructability and economic efficiency. The construction of concrete eco-pillar debris barriers has increased recently. However, there are no design standards concerning debris barriers in Korea, and it is difficult to find a study on performance evaluations in extreme environments. Thus, an analysis of an eco-pillar debris barrier was done using the rock impact speed, which was estimated from the debris flow velocity. The diameters of rocks were determined by ETAG 27. The impact position, angles, and rock diameter were considered as variables. A concrete nonlinear material model was applied, and the estimation of damage was done by ABAQUS software. As a result, the damage ratio was found to be less than 1.0 at rock diameters of 0.3 m and 0.5 m, but it was 1.39 when the diameter was 0.7 m. This study could be used as basic data on impact force in the design of the cross section of an eco-pillar debris barrier.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.1
• /
• pp.68-75
• /
• 2019

This study aims to look at the application methods of landscape architecture in response to the 4th Industrial Revolution. The results of the analysis of trends in the 4th Industrial Revolution and the subsequent search for application methods to the field of landscape architecture are as follows. First, the 4th Industrial Revolution means innovative change based on digital technology and seeks to create value based on intelligent information technology, and continuous growth is being made through innovation. This requires expertise to collect large amounts of information and creatively rework it, and a strategy to flexibly cope with changes in the times. Second, the status of technological use in response to the 4th Industrial Revolution in the field of landscape architecture is generalizing the establishment of precise analysis results such as survey technology and global mapping using drones, three-dimensional design simulation, and VR. In the field of traditional landscape architecture, efforts are made to obtain accurate fact-finding data on landscape site components. Third, the application methods in the field of landscape science according to the 4th Industrial Revolution in the future are required to supply precision technology and supply programs in the technology sector, and to provide a shared platform. In addition, a systemically standardized process will need to be established for this. In addition, educational efforts should be continued to professional manpower training and provide economic support for the development of technologies.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.5
• /
• pp.459-468
• /
• 2021

Blocking electromagnetic waves on the exterior walls of buildings effectively reduces the intensity of electromagnetic fields in buildings, which leads to attenuation of electromagnetic disturbances, so there is a great interest in developing technologies. In this study, SiC by-products and graphite generated in the semiconductor field were selected and mixed into mortar after pretreatment such as pulverization to evaluate their physical properties and electromagnetic wave shielding performance. Considering the economic efficiency of each shielding material, only 10% volume of the outermost side of the experiment was mixed with each shielding material to evaluate the shielding performance. The shielding performance was predicted when the experiment was manufactured by mixing the shielding material with the entire volume of the experiment using the shielding effect evaluation formula. The results of the experiment showed that the shielding performance was up to 20 dB when SiC grains were mixed with shielding materials, the shielding performance was up to 18 dB when graphite powder was mixed with shielding materials, and the shielding performance was up to 28 dB when SiC powder was mixed with shielding materials, and the shielding performance was close to 30 dB, which is known to have a shielding rate of 99.9%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.759-767
• /
• 2021

Most weapons systems that are Force Integration are expensive equipment that reflects the latest technology, and the operation and maintenance cost is increasing continuously. Factors that efficiently operate and maintain these weapon systems include maintenance plans, economic costs, and repair part requirements. Among them, predicting the repair parts requirements during the life cycle in advance is an important way to increase operation and maintenance cost efficiency and operating availability. The start of requirement analysis for repair parts is a calculation of the CSP (CSP: Concurrent Spare parts, CSP hereafter) that is distributed when the weapon system is deployed. The CSP is an essential component of achieving the operating availability during this period because the weapon system aims to successfully perform a given operation mission without resupply for an initial set period. In the present study, the CSP calculation method was analyzed, reflecting the failure rate and operating time of items, but the analyzed CSP was aimed at preparing for technical failure, but in the initial operating environment, it is limited in coping with unexpected failures caused by human error. The failure is not included in the scope of free maintenance and is a serious factor in making the weapon system inoperable during the initial operation period. To prevent the inoperable status of a weapon system, CSP that considers human error is required in the initial operating environment, and the calculation criteria and measures are proposed.