• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.2
• /
• pp.257-262
• /
• 2002

Effects of dietary fatty acids and vitamin E on antioxidant system were studied in rat liver and serum. Sources of dietary fat (10 wt%) were safflower oil (SO) poor in $\omega$3 fatty acid and mixed oil (MO) with computer-adjusted fatty acid ratios (AA/DHA=1.4, $\omega$6/$\omega$3=6.3, P/M/S=1.0/l.5/1) with (ME) and without (MO) vitamin E (500 mg/kg diet). Rats were fed the three kinds of diet from 3~4 wks prior to the conception. At the age of 3 and 9 wks of the second generation rat, antioxidant vitamins and glutathione peroxidase (GSH-Px), superoxide dismutase (SOD) activities were measured in the liver and serum. The concentrations of $\beta$-carotene were lower in ME than in MO and SO in the liver at the age of 3 wks. It seemed that vitamin E has an inhibitory action on the uptake of $\beta$-carotene or acts as a preferred antioxidant to $\beta$-carotene. The concentrations of lycopene were lower in SO than in MO in the liver at the age of 3 wks. The concentrations of cryptoxanthin showed no significant changes within groups. The activities of GSH-Px tended to increase in ME compared to MO and the ratios of SOD/GSH-Px tended to decrease in ME compared to MO in the liver at the age of 3 weeks. The activities of antioxidant enzyme at the age of 3 weeks and 9 weeks were similar. This suggested that the activity level of antioxidant enzymes reached to the adult level at the age of 3 weeks which is the end point of lactation period.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.270-273
• /
• 2007

In this report, Indium-free and Indium-reduced thin film materials for solar absorber were studied in order to search alternative materials for thin film solar cell. The films of $Cu_2ZnSnSe_4$ and $Cu_2ZnSnSe_2$ were deposited using mixed binary chalcogenides powders. From the film bulk analysis result, it is observed that Cu concentration is a function of substrate temperature as well as CuSe mole ratio in the target. Under optimized conditions, $Cu_2ZnSnSe_4$ and $Cu_2ZnSnSe_2$ thin films grow with strong (112), (220/204) and (312/116) reflections. Films are found to exhibit a high absorption coefficient of $10^4$ $cm^{-1}$. $Cu_2ZnSnSe_4$ film shows a 1.5 eV band gap. On the other side, an increasing of optical band gap from 1.0 eV to 1.25 eV ($CuInSnSe_2$) is found to be proportional with an increasing of Zn concentration. All films have a p-type semiconductor characteristic with a carrier concentration in the order of $10^{14}$ $cm^{-3}$, a mobility about $10^1$ $cm^{2{\cdot}-1.}S^{-1}$ and a resistivity at the range of $10^2-10^6$ ${\Omega}{\cdot}m$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.245-245
• /
• 2012

차세대 디스플레이로 각광받고 있는 AMOLED에 대한 관심이 높아짐에 따라 구동 소자의 연구가 활발히 이루어지고 있다. 산화물 반도체 박막 트랜지스터는 비정질 실리콘 박막 트랜지스터에 비해 100 $cm^2$/Vs 이하의 높은 이동도와 우수한 전기적 특성으로 AMOLED 구동 소자로서 학계에서 입증되어왔고, 현재 여러 기업에서 산화물 반도체를 이용한 박막 트랜지스터 제작 연구가 활발히 이루어지고 있다. 본 연구는 열처리 조건을 가변하여 제작한 산화물 반도체 박막 트랜지스터의 전기적 특성 분석을 목적으로 한다. 실리콘 기판에 oxidation 공정을 이용하여 SiO2 100 nm, DC스퍼터링을 이용하여 ITZO (Indium-Tin-Zinc Oxide) 산화물 반도체 박막 50 nm, 증착된 산화물 반도체 박막의 열처리 후, evaporation을 이용하여 source/drain 전극 Ag 150 nm 증착하여 박막 트랜지스터를 제작하였다. 12 sccm의 산소유량, 1시간의 열처리 시간에서 열처리 온도 $400^{\circ}C$, $200^{\circ}C$의 샘플은 각각 이동도 $29.52cm^2/V{\cdot}s$, $16.15cm^2/V{\cdot}s$, 문턱전압 2.61 V, 6.14 V, $S{\cdot}S$ 0.37 V/decade, 0.85 V/decade, on-off ratio 5.21 E+07, 1.10 E+07이었다. 30 sccm의 산소유량, 열처리 온도 $200^{\circ}C$에서 열처리 시간 1시간, 1시간 30분 샘플은 각각 이동도 $12.27cm^2/V{\cdot}s$, $10.15cm^2/V{\cdot}s$, 문턱전압 8.07 V, 4.21 V, $S{\cdot}S$ 0.89 V/decade, 0.71 V/decade, on-off ratio 4.31 E+06, 1.05 E+07이었다. 산화물 반도체의 열처리 효과 분석을 통하여 높은 열처리 온도, 적은 산소의 유량, 열처리 시간이 길수록 이동도, 문턱전압, $S{\cdot}S$의 산화물 박막 트랜지스터 소자의 전기적 특성이 개선되었다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.1
• /
• pp.97-107
• /
• 2020

In this study, finite element analysis was carried out through the finite element analysis program (ANSYS) to investigate the fire resistance of composite columns in fire. Transient heat transfer analysis and static structural analysis were performed according to ASTM E 119 heating curve and axial force ratio 0.7, 0.6, 0.5 by applying stress-strain curves according to temperature, and loading heating experiments were carried out under the same conditions. In addition, the nominal compressive strength of the composite column according to the heating time according to the standard(Eurocode 4) was calculated and expressed as the axial force ratio and compared with the analytical and experimental values. Through the analysis, As a result of finite element analysis, the fire resistance time was 180 minutes and similar value to the experimental value was obtained, whereas the fire resistance time 150 minutes and 60 minutes were derived from the axial force ratios 0.6 and 0.7. In addition, it was confirmed that the fire resistance time according to the axial force ratio calculated according to the reference equation (Eurocode 4) was lower than the actual experimental value. However, it was confirmed that the standard(Eurocode 4) was higher than the experimental value at the axial force ratio of 0.7. Accordingly, it is possible to confirm the fire resistance characteristics(time-axial force ratio relationship) of the SRC column at high axial force, and to use the experimental and anaylsis data of the SRC column as the data for verification based on Eurocode.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.386-393
• /
• 1994

We have investigated output characteristics of XeCI excimer laser excited by transeverse electronbeam. We used e-beam output of 880 kV, 21 kA (70 ns, FWHM) and controlled current density of e-beam by pulsed magnetic coil (4.7 kG) which was fabricated around an e-beam diode (A-K gap is 21 mm) and laser chamber. We have obtained 35 J (4 atm) of e-beam deposition energy injected into laser media. The deposition energy was converted from an exposure area of Radcolor film and rising pressure of gas media which is measured by pressure jump method. The excited volume of $320cm^{3}$ was calculated. The maximum efficiency of 1.7% was obtained with the mixing ratio of HCllXe/Ar==0.2/ 6.3/93.5% and total pressure of 3 atm. Also laser output energy and specific energy were obtained 0.52 J and 1.7 J/I, respectively. For the analysis of experimental results we have developed computer simulation code. From the good agreements with the results of experiment and simulation we could theoretically explain the XeCI* formation channel. relaxation channel, and absorption channel of 308 nm.308 nm.

• Korean Chemical Engineering Research
• /
• v.54 no.4
• /
• pp.519-526
• /
• 2016

Biomass derived jet fuel is proven as a potential alternative for the currently used fossil oriented energy. The efficient production of jet fuel precursor with special molecular structure is prerequisite in producing biomass derived jet fuel. We synthesized a new jet fuel precursor containing branched $C_{15}$ framework by aldol condensation of furfural (FA) and ethyl levulinate (EL), where the latter of two could be easily produced from lignocellulose by acid catalyzed processes. The highest yield of 56% for target jet fuel precursor could be obtained at the optimal reaction condition (molar ratio of FA/EL of 2, 323 K, 50 min) by using KOH as catalyst. The chemical structure of $C_{15}$ precursor was specified as (3E, 5E)-6-(furan-2-yl)-3-(furan-2-ylmethylene)-4-oxohex-5-enoic acid ($F_2E$). For stabilization, this yellowish solid precursor was hydrogenated at low temperature to obtain C=C bonds saturated product, and the chemical structure was proposed as 4-oxo-6-(tetrahydrofuran-2-yl)-3-(tetrahydrofuran-2-yl)-methyl hexanoic acid ($H-F_2E$). The successful synthesis of the new jet fuel precursors showed the significance that branched jet fuel could be potentially produced from biomass derived FA and EL via fewer steps.

• Korean Journal of Animal Reproduction
• /
• v.10 no.1
• /
• pp.27-35
• /
• 1986

As a preliminary experiment to establish the process on the sexing of mouse embryos by chromosomal analysis, present studies were carried out with inbred (ICR, C57BL) and F1 hybrid [(ICR${\times}$C57BL) = F1 ${\times}$ ICR] mice to investigate the blastomere numbers and mitotic indices (M.I.) to the developmental stage of embryos recovered, the optimum periods of anti-mitotic agent administration, the successful rates of sexing and sex-ratio. The results obtained were summarized as follows: 1. The blastomere numbers (mean${\pm}$S.E.) of the morula and blastocyst were 18${\pm}$0.4 and 54${\pm}$0.7, respectively. 2. Whereas the M.I. of F1 hybrid (16${\pm}$0.2%) was higher than that fo inbred ICR (15${\pm}$0.1%) and C57BL (12${\pm}$0.6%) in the different strains, the morula (7${\pm}$0.6%) was higher than that of blastocyst (6${\pm}$0.4%) in the case of embryo stages. 3. Following to anti-mitotic agents treated, the M.I. of embryos cultured with Colcemid (17${\pm}$1.1%) was superior to that fo embryos cultured with Velban (12${\pm}$0.9%) and the Colcemid injection (7${\pm}$0.4%). 4. The successful rate of sexing in the blastocyst (38.7%; 124/320) was superior to the morula (35.9%; 52/145), and the F1 hybrid (48.1%) was higher than that of inbred ICR (42.4%) and C57 BL (28.2%). 5. In the successful rate of sexing to the methods of administration, the embryos cultured with Colcemid (46.0%) was superior to that of embryos cultured with Velban (39.0%) and the Colcemid injection (38.8%). 6. Of 98 embryos sexed after culture with Colcemid, 89(90.8%) were observed between 2 and 4 hrs. In the case of Velban treatment, 83.1% (74/89) was observed between 2$\frac{1}{2}$ and 4$\frac{1}{2}$ hrs. 7. Out of 761 prepared embryos it was possible to sex 311; 157 were male and 154 were female, i.e.a sex-ratio of 50% a, pp.oximately.

• Archives of Plastic Surgery
• /
• v.32 no.6
• /
• pp.717-722
• /
• 2005

The authors evaluated 14 patients from July 1999 to February 2004 treated with total keloidectomy followed by postoperative radiation treatment, delivered within 24 hours or 24-36 hours after surgery. The total dose of radiation was 1200 cGy in three fractions for 4-5 days. Among the 14 patients treated, 8 patients were evaluated for following-up. The age range of these patients were from 22 to 44 years old, with the average age of 30 years. The site of keloid lesions consisted; 6 on the ear lobe, 5 on the anterior chest and 1 on the upper arm. The mean follow-up period was 29.9 months. The recurrence was evaluated with photogrammetric analysis and skin color analysis. The photogrammetric analysis was performed with planimetry for the comparison of the ratio of the reduced size to the preoperative size. The mean value of the relative size of reduction was 55% and the ratio of the ear lobes were greater than the ratio of the chests. The skin color analysis was performed with chromameter CR-300 for the analysis of color difference (E) between the surrounding normal skin and the lesion. The larger the recurred size was, similar to the original size, the larger the E value was, so the E value posses the probability of predictable objective tool of recurrence. Although verifying the effectiveness of radiation therapy following keloidectomy need more cases and long term follow-up evaluation, this therapeutic modality seems very effective in reducing the keloid size, especially in the ear lobe.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.7
• /
• pp.428-432
• /
• 2015

Sintering and microwave dielectric properties of $Zn_{2-2x}Si_{1+x}O_4$ (x=0~0.10) ceramics were investigated. The secondary phase of ZnO was observed in the specimen for x=0 whereas $SiO_2$ was detected in that for x=0.05. The composition of $Zn_2SiO_4$ might be close to x=0.02, i.e., $Zn_{1.96}Si_{1.02}O_4$; the ratio of Zn/Si is 1.922. The insufficient grain growth was observed in the specimen of x=0. For the specimens of $x{\geq}0.05$, the grain growth sufficiently occurred through the liquid phase sintering. The value of quality factor of all specimens was dependent on the x value, i.e., the ratio of Zn/Si, whereas that of dielectric constant was independent. Relative density, dielectric constant, and quality factor ($Q{\times}f$) of the specimen for x=0.05, i.e., $Zn_{1.9}Si_{1.05}O_4$, sintered at $1,400^{\circ}C$ were 96.5%, 6.43, and 115,166 GHz, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9A
• /
• pp.1276-1284
• /
• 1999

We have evaluated the BER's and CLP's of Wireless ATM (WATM) cells employing the concatenated FEC code with pilot symbols for fading compensation through the simulation in indoor wireless channel modeled as a Rayleigh and a Rician fading channel, respectively. The results of the performance evaluation are compared with those obtained by employing the convolutional code in the same condition. In Rayleigh fading channel, considering the maximum tolerance BER ( $10^-3$) as a criterion of the voice service, it is blown that the performance improvement of about 4 dB is obtained in terms of $E_b/N_o$ by employing the concatenated FEC code with pilot symbols rather than the convolutional code with pilot symbols.When the values of K parameter which means the ratio of the direct signal to scattered signal power in Rician fading channel are 6 and 10, it is shown that the performance improvement of about 4 dB and 2 dB is obtained, respectively, in terms of $E_b/N_o$ by employing the concatenated FEC code with pilot symbols considering the maximum tolerance BER of the voice service. Also in Rician fading channel of K=6 and K= 10, considering CLP = $10^-3$ as a criterion, it is observed that the performance improvement of about 3.5 dB and1.5 dB is obtained, respectively, in terms of $E_b/N_o$ by employing the concatenated FEC code with pilot symbols.