• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.4
• /
• pp.73-81
• /
• 2009

The document archives like official documents, books, maps and historic paper artifacts are primarily based on the organic cellulosic materials. As the passage of time, these organic cellulosic materials are slowly deteriorated by various aging factors, like light, polluted air and biological fungi. Many researchers have been carried out the examination method of deteriorating origins, the mechanism of aging hysteresis, and the preserving method of archival materials. One of the most simple and easiest ways for conservation of organic archival documents is the proper storage under environmental control. Corrugated board for archival quality container has been developed and already used in advanced country, like Japan, USA, German, UK and Europe. In case of Korea, corrugated board for archival quality container has been used a decade ago, but totally imported. This study was tried to develop the corrugated board for archival quality container. Liner and corrugated medium were specially produced and finally manufactured to E flute corrugated board. The physical and strength properties of permanent base paper and corrugated board were evaluated, and compared with imported corrugated board. 4 kinds of corrugating adhesives were considered various in order to investigate optimum adhesive for flute development between liner and corrugating medium, and evaluate adhesion strength under conditions of storage and curing temperatures.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1855-1857
• /
• 2001

An Inverted-F antenna for the 2.4GHz application is designed and implemented. The antenna is implemented on the PCB board and installed in a vertical position. The 10dB characteristics are 2.4 to 2.48GHz in bandwidth which satisfies the bluetooth requirement and the whole impedance is matched. The feed-line on the PCB board is also calculated and implemented. And the measuring system is installed at the KITI in Kangwon Nat'l Univ. and applied to measured the antenna characteristics. The measured values show that this antenna is suitable for the commercial applications.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.2
• /
• pp.229-235
• /
• 2003

We designed a family of completely autonomous mobile robots with local intelligence. Each robot has a number of on-board sensors, including vision, and does not rely on global positioning systems The on-board embedded controller is sufficient to analyze several low-resolution color images per second. This enables our robots to perform several complex tasks such as navigation, map generation, or providing intelligent group behavior. Not being limited to playing the game of soccer and being completely autonomous, we are also looking at a number of other interesting scenarios. The robots can communicate with each other, e.g. for exchanging positions, information about objects or just the local states they are currently in (e.g. sharing their current objectives with other robots in the group). We are particularly interested in the differences between a behavior-based approach versus a traditional control algorithm at this still very low level of action.

• Journal of Food Hygiene and Safety
• /
• v.16 no.2
• /
• pp.96-102
• /
• 2001

Bacteriological quality of beef carcass and distributions of pathogens in beef processing environments were investigated to improve the hygienic quality of fresh beef. Total bacterial contamination of carcass surface in slaughtering process and cutting board in cut-meat process showed 10$^{5}$ -10$^{6}$ CFU/$\textrm{cm}^2$ and 10$^{5}$ CFU/$\textrm{cm}^2$ in summer, respectively. The viable bacterial count of cotton glove was similar to that of cutting board during and entire period of year. Microbial contamination of carcass surface, cutting board, cotton glove and deboned meat showed the highest in summer and the lowest in winter during the year. Escherichia coli O157, Pseudomonas aeruginosa, Klebsiella. ornithinolytica, Staphylococcus aureus, E coli, Tatumella. ptyseos, Serratia odorifera, Aero-monas sobria, Enterobacter cloacae and Flavimonas oryzihabitans were isolated from carcass surface during slaughter treatments. S. aureus, Listeria grayi and L. monocytogenes were isolated from cutting board and L. grayi, Erwinia spp. Salmonella app. and S. aureus were isolated from cotton glove in cut-meat process environments. Citrobacter freundii; L. monocytogenes; and S. aureus were isolated from deboned meat.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.80-82
• /
• 2005

There is a method for stringing conductors which is connected to a wire over transmission towers by helicopter or human power and the wire and conductors are pulled by an engine puller. The length of one string section is usually 4-6 km and 2-4 conductors are strung at the same time with a single wire. A tensioner is used to maintain the sag and a running board is installed between the wire and conductors to prevent the rotation of conductors but the variance in topology, the line angle and unequal wiring tension between conductors causes conductor rotation damage or the conductor connection point to breakaway when the pulley is passed. This paper presents a method to prevent conductor rotation during stringing by inserting a pulley in the running board and equally maintaining conductor tension by sling wire after developing and testing.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.257-259
• /
• 2006

The Communication Ocean Meteorological Satellite (COMS) is a geostationary satellite being developed by Korea Aerospace Research Institute. Geostationary Ocean Color Imager (GOCI) is one of the payloads embarked on the COMS satellite. It acquires ocean images around Korea in 8 visible spectral bands with a spatial resolution of about 500 m. The acquired data are used to provide forecasting and now casting of the ocean state. The GOCI operations are controlled by the satellite embedded software, i.e. on-board software. This paper introduces the GOCI payload of the COMS satellite and describes the control software for the GOCI.

• International Journal of Quality Innovation
• /
• v.2 no.2
• /
• pp.69-92
• /
• 2001

The laser-assisted seeding (LAS) process has potential to replace conventional electroless copper plating in Printed Circuit Board (PCB) manufacturing since it combines the steps of laser drilling and plating into one single process. In the LAS process, the single extra LAS step can metallize a microvia. Thus, the process steps can be greatly reduced and the productivity enhanced, but also the high aspect ratio microvias can be metallized. The objectives of this paper are to study the LAS copper thickness within PCB microvias and the thermal reliability of the microvias produced by this process. It was found that results were satisfactory in both the reliability test and also the LAS copper thickness which both comply with IPC standard, the copper thickness produced by the LAS process is sufficient for subsequent electro-plating process. The reliability of the microvias produced by LAS process is acceptable which are free from any voids, corner cracks, and distortion in the plated copper.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3147-3149
• /
• 1999

In this paper, we develop a TMS320C31- 60 DSP board to generate spiral gradient waveforms for Spiral imaging, one of the ultra fast MRI methods. In Spiral imaging, accurate gradient waveforms are very important to acquire high quality image. For this purpose, sampling rate for generating the gradient waveforms is set twice as high as the data sampling rate. With the developed DSP board accurate gradient waveforms are obtained. Ultra fast MR image with the developed DSP board is currently under development.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.883-886
• /
• 2005

This paper proposed a wireless measurement system (WMS) for an effective condition monitoring using wireless communication. WMS consists of two parts: transmitter(TM) acquired a dynamic signal from physical system using ICP type accelerometer sensor. An acquired signal modulated through the low/high pass filter and amplifier in DAQ board, which converted to digital signal. Embedded board(E-board) transferred digital signals to base station(BS) through the socket IEEE.802.11.b. BS is adopted IOCP server structure. Because it can acquired signal well during transferred digital signal. Signal processing used LabVIEW Library, BS(server) designed to realize multi-thread using visual C++.NET for 1 many meaning data processing

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.1
• /
• pp.80-87
• /
• 2004

This study was carried out to improve the properties of powdered tannin adhesive(PT) by adding liquid tannin resin(LT) to PT in the manufacture of particleboard. Mixing the LT to PT from 50% to 100% by weight did not show any difference in particleboard properties, but the higher the powdered tannin resin ratio, the lower the properties of the board. The proper ratio of PT to LT was 30:70 for the improvement of PT-particleboard, unless LT lower than 70%. Internal bonding strength was in proportional to the amount of LT. Mixing amino adhesives and PT did not show any improvements in mechanical and physical properties of the board but they only acted as scavenger for the free formaldehyde.Manufacturing particle board with the adhesive of 30:70 (PT:LT) and by using double blender resulted in high-performance products of E₀ level of formaldehyde emission with high water resistance (U type; below 12%, M type; below 25%), as well as saving chip drying energy.