• The Korean Journal of Applied Statistics
• /
• v.3 no.2
• /
• pp.55-77
• /
• 1990

In this paper we descuss some E-optimal block designs having unequal block sizes, and give a table of E-optimal designs with 2 different block sizes which can be constructed using the method described in Theorem 3. 2, Theorem 3. 4 and Theorem 3. 5 proved by Lee and Jacroux (1987). All of source designs used are Group Divisible designs which can be found in Clathworthy(1973) or Balanced Incomplete block designs in Raghavarar(1971).

• New & Renewable Energy
• /
• v.18 no.4
• /
• pp.1-11
• /
• 2022

Landfill gas (LFG) generation characteristics in a construction waste landfill zone (block E) and mixed landfill zone (block A) were analyzed. During the period from October 2018 to April 2022, a total of 936×10³ and 1,001×10³ tons of waste were disposed in block E and block A, respectively. Out of this, 27.1% and 55.6% were biodegradable waste in block E and block A, respectively. The landfill masses of the two blocks were converted to be comparable. Then, the biodegradable waste and organic carbon were estimated by element analysis, biodegradable carbon by biochemical methane potential experiment (DC), and sulfate ion by acid decomposition. Results showed that biodegradable waste, organic carbon, biodegradable carbon, and sulfate ions in block A were 2.1, 1.6, 5.2, and 0.4 times greater than those in block E, respectively. The amount of LFG generated by block A was 4.8 times greater than that by block E. The average concentrations of methane (CH₄) were 60.8% and 60.9% in block E and block A, respectively, which were unrelated to the nature of disposed waste. The average concentrations of hydrogen sulfide (H₂S) were significantly high in block E (4,489 ppm) and block A (8,478 ppm). As the DC/SO₄^2- of block E and block A were 0.35 and 4.56, respectively, increase in DC/SO₄^2- caused increase in not only the total amount but also the concentration of H₂S generated.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.4
• /
• pp.99-106
• /
• 2017

With the advent of virtual money such as bit coins, interest in the block chain is increasing. Block Chain is a technology that supports Distributed Ledger and is a versatile technology applicable to various fields. Currently, the block chain is conducting research for various applications such as virtual money, trade finance, marketplace, power market, image contents service, and IoT. The technologies that make up the block chain are smart contract, digital signature/hash function and consensus algorithm. And these technologies operate on P2P networks. In this paper, we have studied e-mail system based on the ethereum which is one of the block chain based technologies. Most legacy mail systems use SMTP and the POP3/IMAP protocol to send and receive e-mail, and e-mail use S/MIME to protect the e-mail. However, S/MIME is vulnerable to DDoS attacks because it is configured centrally. And it also does not provide non-repudiation of mail reception. To overcome these weaknesses, we proposed an e-mail system model based on ethereum. The proposed model is able to cope with DDoS attack and forgery prevention by using block chain based technology, and reliable recording and management among block chain participants are provided, so that it is possible to provide a non-repudiation function of e-mail transmission and reception.

• Journal of the Korean Statistical Society
• /
• v.15 no.2
• /
• pp.127-130
• /
• 1986

Constantine(1981) extended the results of Takeuchi(1961) by adding some new blocks to certain known E-optimal block design. But they are confined to equal blocksize designs. In this paper we agin generalize them to different blocksize case. By augmenting some known E-optimal block designs having blocks of equalsize with blocks of different sizes, additional E-optimal block designs are obtained.

• Journal of Periodontal and Implant Science
• /
• v.38 no.sup2
• /
• pp.325-334
• /
• 2008

Purpose: The carrier used as delivery agent for bone morphogenetic proteins(BMPs) should also act as a scaffold for new bone formation. Moreover, bone formation should be predictable in terms of the volume and shape. This study examined the osteogenic effect of macroporous biphasic calcium phosphate (MBCP) block combined with ePTFE membrane as a carrier for recombinant human bone morphogenetic proteins (rhBMP-2). In addition, the additive effect of ePTFE membrane on bone formation was evaluated. Materials and Methods: Eight-millimeter critical sized calvarial defects were created surgically in 28 male Sprague-Dawley rats. The animals were divided into 2 groups containing 14 animals each. The defects were treated with either rhBMP-2/MBCP block (rhBMP-2/MBCP group) or rhBMP-2/MBCP block/ePTFE membrane (rhBMP-2/MBCP/ePTFE group). A disc-shaped MBCP block (3 mm height and 8 mm diameter) was used as the carrier for the rhBMP-2 and ePTFE membrane was used to cover the rhBMP-2/MBCP block. The histologic and histometric parameters were used to evaluate the defects after 2- or 8-week healing period (7 animals/group/healing interval). Results: The level of bone formation in the defects of both groups was significantly higher at 8 weeks than that at 2 weeks (P < 0.05). The ePTFE membrane has no additional effect compared with the rhBMP-2/MBCP block only. However, at 8 weeks, rhBMP-2/MBCP/ePTFE group showed more even bone formation on the top of the MBCP block than the rhBMP-2/MBCP group. Conclusion: These results suggest that the ePTFE membrane has no additive effect on bone formation when a MBCP block is used as a carrier for rhBMP-2.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.6 s.58
• /
• pp.176-182
• /
• 2009

Other damage can occur due to the preexisting dull structure and installation of nonenvironmental-friendly concrete structure, lack of function for preventing coastal erosion. Increase of personal income and fast spread of the concept of waterfront casued the initiation of many project to improve aging coastal ports. However, none of environment-friendly structure has been developed and pre-existing solid block, igloo block, tunnel block are used commonly. In piers and lighter's wharf where the ships are mooring, resonance by the generation of a reflected wave caused by penetration wave in the port and port wave increases wave heights in the port and makes difficult to maintain the temperature, causes problems in mooring ships and cargo-working, and eventually increase the occurance of damages of the small ships by the collision. Therefore, development of new types of blcok is necessary. To apply Coastal Environments block developed for this reason, it requires allowable bearing capacity evaluation of shear key. For this study, we made test specimen for connecting part of C.E. Block, and conducted friction test of boundary surface. Data obtained by the experiment was analyzed by finite element analysis and assessed the coefficient of friction between C.E. Block and boundary surface.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.49-52
• /
• 2008

The plain and simple shape water front structure were designed and installed for wave protection and wave resistance. But the installation of these plain and simple structure cause deficiency of environmental affinity. Also the resonance phenomena from the reflective wave and shipwave of the harbor incident wave caused high tide and wave, consequently maintaining the tranquility of inside harbor, give difficulty for mooring the ship and loading-unloading, increase the possibility of ship collision at the quray wall and landing place To solve these problems, we develop the environmentally friendly wave dissipation block. And installation efficiency, stability of the blocks through experiment of C.E Block Joint.

• International Journal of Concrete Structures and Materials
• /
• v.18 no.1E
• /
• pp.11-16
• /
• 2006

The use of the current ACI 318 stress block parameters has been reported to provide unconservative estimations of the moment capacities for high-strength concrete columns. Accordingly, several concrete stress block parameters have been recently proposed. This paper discusses various concrete stress block parameters for high-strength concrete and their influences on the code provisions. In order to adopt the proposed stress block parameters to the design code, it is necessary to understand the impact of the change of the stress block parameters on various aspects of the code provisions. For this purpose, the influence of using of different stress block parameters on the location of the neutral axis and the tensile strain in extreme tension steel as well as the axial and moment capacities are investigated. In addition, the influence on the prestressed concrete members is also elucididated.

• The Korean Journal of Pain
• /
• v.7 no.2
• /
• pp.299-302
• /
• 1994

Prostaglandin E1(PGE1) is a potent vasodilator and is a useful drug for the treatment of occlusive peripheral vascular disease. It has been used systemically via intravenous route or regionally via intraarterial route. We tried intravenous regional administration of PGE1 for the treatment of a patient with occlusive arterial disease involving left fingers. During the 13th injection, the patient complained of severe pain at the injection site during the drug administration. Thereafter, the patient developed painful and severe swelling with blebs on his left hand. Systemic antibiotics were given together with stellate ganglion block of the affected left side. PGE1 was substituted to reserpine, which is subcutaneously injectable, for the second term treatment.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.15-22
• /
• 2008

Polyolefin block copolymer has been taking a great deal of attention due to their great potential in polymer industry since a new metallocene catalytic method for producing polyolefin block copolymer was developed by Dow Chemicals. However, so far, there was no systematic study of olefin block copolymer. In this review, Linear polyolefin block copolymers, containing semicrystalline poly (ethylene) (E) blocks and a rubbery block as a thermoplastic elastomer, were investigated in the viewpoint of microphase separation mode, microstructure, deformation behavior, and molecular architecture.