• Structural Engineering and Mechanics
• /
• v.18 no.1
• /
• pp.79-90
• /
• 2004

A high precision shear deformable triangular element has been proposed for bending analysis of triangular plate. The element has twelve nodes at the three sides and four nodes inside the element. Initially the element has thirty-five degrees of freedom, which has been reduced to thirty by eliminating the degrees of freedom of the internal nodes through static condensation. Plates having different boundary conditions, side ratios (b/a) and thickness ratios (h/a = 0.001, 0.1 and 0.2) have been analyzed using the proposed shear locking free element. Concentrated and uniformly distributed transverse loads have been used for the analysis. The formulation is made based on first order shear deformation theory. For validation of the present element and formulation few results of thin triangular plate have been compared with the analytical solutions. Results for thick plate have been presented as new results.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.8
• /
• pp.820-827
• /
• 1990

For the purpose of investigation the thrust force, the lateral force, and the eddy current loss when the primary and the secondary of a single-sided linear induction motor is displaced in the space, this paper proposes an analysis technique for the characteristics of the eddy current induced on the secondary and the magnetic flux density distribution in the y-z plane by F.E.M. To verify the effectiveness of this analysis technique, the starting-thrust force due to a lateral displacement is compared to the experimental data.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.426-439
• /
• 1988

Dynamic properties such as stiffness and damping of mechanical joints are essential for the accurate prediction of the dynamic behaviors of the system and subsequent improvement of the design. So far several techniques, analytical, experimental, or both have been developed. A technique using condensed F.E.M. model and Experimental Modal Analysis is presented to identify the joint structural parameters. First, modal parameters of structure are measured by certain complex frequency obtained from experiment to match with the order of the Experimental Modal Analysis model. Finally by equating the modal parameters obtained from experiment with those of the condensed system, the unknown joint structural parameters can be identified. A simulation study is conducted to investigate the accuracy of technique. The experiments are performed with ball bearings in a rotor bearing system.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.632-634
• /
• 2000

This paper presents a simple analysis method for inverter-fed induction motor using F.S.M and equivalent circuit. This analysis is carried out to analyze an induction motor driven by the sinusoidal voltage and the inverter. The results are verified by comparing with those of the time-step F.E.A and the experiment.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.818-820
• /
• 2004

This paper is described the insulation design and 3-D electromagnetic analysis of 6.6kV main transformer for a vessel by F.E.M.. To obtain the optimal design of insulation structure, the electric field stress is analyzed and estimated the proposed model A and B for the characteristics investigation according to the insulation thickness and position. And the performance characteristics of 6.6kV transformer are estimated as the equivalent circuit parameters computed by F.E.M. analysis.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.2
• /
• pp.136-140
• /
• 2004

Twenty-one lowland rice genotypes were evaluated for their stability parameters with respect to grain yield in a multi locational trial at five different sites of Eastern India viz. CRRI, Cuttack (Orissa); OUAT, Bhubaneswar (Orissa); CRS, Masodha (UP); RAU, Pusa (Bihar) and RARS, North Lakhimpur (Assam). Pooled analysis of variance reflects existence of genotype x environment interactions and contribution of both linear and nonlinear components to genotype (G) x environment (E) interactions. Through stability parameter analysis it was found that Rayda $\textrm{B}_3$, CR 778-95 and CR 661-236 were suitable for over all environments where as Sabita, OR 1334-16 and OR 1358-RGA-4 were suitable for rich environments. PSR 1209-2-3-2, CR 780-1937, Ambika, OR 877-ST-4-2 and CR 662-2211 were identified for poor environments.

• Nano
• /
• v.13 no.12
• /
• pp.1850143.1-1850143.9
• /
• 2018

Natural biotemplates - such as bacteria, fungi and viruses - are used in nanostructured metal oxide production. The pollen can be found abundantly in nature, and their microcapsules can be easily isolated from the pollen by chemical treatments. To date, pollen microcapsules are mostly used as drug carriers and catalytic agent templates. In the present study, nanoporous-structured nickel oxide is produced using Pistachio pollen microcapsules. The raw pollen, chemically treated pollen and metal-coated pollen were characterized using scanning electron microscopy, Brunauer-Emmett-Teller (BET) surface area analysis, thermogravimetric analysis (TGA), differential thermal analysis (DTA) and X-ray diffraction (XRD) techniques. The natural Pistachio pollen which were procured from Gaziantep, Turkey, are spherical, with a diameter of approximately $23{\mu}m$. The maximum surface area obtained for nickel oxide-coated microcapsules is $228.82m^2/g$. This result shows that Pistachio pollen are an excellent candidate for the production of porous nanostructured materials for supercapacitor electrodes.

• BMB Reports
• /
• v.40 no.4
• /
• pp.547-553
• /
• 2007

Many motifs along the 1.2 kb myostatin promoter (MSTNpro) in sheep have been found by the MatInspecter program in our recent study. To further verify the role of the motifs and better understand the transcriptional regulation mechanism of the myostatin gene in sheep, the reporter gene EGFP (enhanced green fluorescent protein) was selected and the wild-type (W) vector MSTNPro$^W$-EGFP or motif-mutational (M) vector MSTNPro$^M$-EGFP were constructed. The transcriptional regulation activities were analyzed by detecting the fluorescence strength of EGFP in C2C12 myoblasts transfected with the vectors. The results showed that E-box (E) 3, E4, E5 and E7, particularly E3, E5 and E7, had important effects on the activity of the 1.2 kb sheep myostatin promoter. In addition, we also detected several other important motifs such as MTBF (muscle-specific Mt binding factor), MEF2 (myocyte enhancer factor 2), GRE (glucocorticoid response elements) and PRE (progesterone response elements) along the sheep myostatin promoter by the mutational analysis.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.1 no.1
• /
• pp.73-78
• /
• 2000

We investigated some biochemical properties of acetylcholinesterase (AChE) in the Bombyx mori larval head. 1% Triton X-100 (v/v) was suitable for extracting AChE from the silkworm larval head but 1 M NaCl was not suitable. PAGE analysis showed a single band of AChE that was detected by histochemical staining using acetylthiocholine as a substrate. AChE was also partially purified with Sepharose 6B and DEAE-cellulose column. Finally, the specific activity of partially purified enzyme solution was 7.6. The study on inhibitor specificity indicated that the enzyme under study was a true cholinesterase (ChE) or AChE. AChE activity was maximum at the substrate concentration of $5{\times}10^{-4}$ M and the excess substrate inhibited the AChE activity. The optimal pH and temperature were pH 7.0-9.0 and 30-35$^{\circ}C$.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.2
• /
• pp.153-158
• /
• 2021

In order to mitigate the vulnerability of the satellite navigation system against radio frequency interference, South Korea has been developing advanced terrestrial navigation system (eLoran) technology since 2016. The eLoran system synchronizes the transmission time of the pulse used in the existing Loran-C system with UTC and transmits correction information that can improve the position error. The eLoran system is known to reduce the position error of about 460 m of the existing Loran-C system to 20 m, and for this, the transmitter must be able to transmit eLoran signals according to more stringent standards. For this reason, an international standard that further developed the Loran-C signal standard established by US Coast Guard was established by Society of Automotive Engineers (SAE) International. In this paper, based on the analysis of the SAE9990 document, the international standard for eLoran transmission signals, a standard inspection process was produced to check whether the eLoran transmitter is transmitting signals in accordance with the standard.