• 한국산학기술학회논문지
• /
• 제13권3호
• /
• pp.1035-1041
• /
• 2012

본 연구는 기업규모, 장부가치/시장가치 비율, 순이익/주가 비율, 현금흐름/주가 비율, 레버리지 등 기본적 변수를 사용하여 주식수익률에 유의적인 변수를 확인하고자 하였다. 이를 위해 본 연구에서는 횡단면 자료와 시계열 자료를 결합한 패널자료(panel data)를 이용하여 패널자료분석방법으로 연구모형을 실증적으로 분석하였다. 일반적으로 패널자료를 사용하면 Hsiao[13]가 지적한 바와 같이 표본의 크기를 확대시켜 자유도를 증가시키고 이론적으로 설명변수간 다중공선성(muti-collinearity) 문제를 완화할 수 있다. 실증분석결과에 의하면 기업규모(SIZ), 장부가치/시장가치 비율(B/M), 순이익/주가 비율(E/P), 현금흐름/주가 비율(C/P) 등이 주식수익률의 횡단면적 차이를 설명할 수 있는 유의적인 변수라 할 수 있다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.1027-1030
• /
• 2006

Development of diurnal warming in the open Okhotsk Sea during the daytime and calm conditions was studied using sea surface temperature (SST) fields retrieved from NOAA AVHRR, Terra and Aqua MODIS, Aqua AMSR-E and ADEOS-II AMSR data. Sea surface wind fields were estimated from AMSR-E/AMSR measurements as well as were obtained from QuikSCAT scatterometer. Weak winds and cloudless conditions were observed in the central area of anticyclone, which moved slowly on 28-30 June 2003 east off Sakhalin. The area where the amplitude of the diurnal SST signal ${\Delta}T$ was significant also shifted slowly and had or circular or elongated shape. The ${\Delta}T$ was estimated relative to the SST values in the areas surrounding the centre of anticyclone where wind speed W exceeded 5- 6 m/s. The diurnal variations of SST, day-night differences were computed using NOAA-12 and NOAA-16 AVHRRderived data. Analysis of simultaneous SST and W fields showed that the increase of W from 0 to 5-6 m/s causes the decrease of ${\Delta}T$ to zero. Maximum warming exceeded $8^{\circ}C$ and was observed in the centre of anticyclone where W = 0 m/s. So strong heating was likely due to the increased chlorophyll a concentration in the area under study that follows from analysis of satellite ocean colour data.

• The Journal of Advanced Prosthodontics
• /
• 제10권2호
• /
• pp.132-137
• /
• 2018

PURPOSE. The purpose of this study was to evaluate and compare three polishing systems on the surface roughness and phase transformation of monolithic zirconia. MATERIALS AND METHODS. 100 disk shaped specimens (10 mm diameter, 3 mm thickness) were fabricated from monolithic zirconia blocks. 20 specimens were left as a control group and remaining specimens were grinded by diamond bur to simulate the occlusal adjustments. Grinded specimens were randomly divided into 4 groups: group G (no polishing), group M (Meisinger, zirconia polishing kit), group E (EVE Diacera, zirconia polishing kit), and group P (EVE Diapol, porcelain polishing kit). Surface roughness was measured with profilometer and surface topography was observed with SEM. XRD analysis was performed to investigate the phase transformation. Statistical analysis was performed with one-way ANOVA and Tukey's post hoc tests at a significance level of P=.05. RESULTS. All polishing groups showed a smoother surface than group G. Among 3 polishing systems, group M and group E exhibited a smoother surface than the group P. However, no significant differences were observed between group M and group E (P>.05). Grinding and polishing did not cause phase transformations in zirconia specimens. CONCLUSION. Zirconia polishing systems created a smoother surface on zirconia than the porcelain polishing system. Phase transformation did not occur during the polishing procedure.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.568-572
• /
• 2001

An industrial vibratory conveyor system is devised for large-scale feeding by the low-power, using natural frequency of the system. The important thing in this system is to determine the natural frequency and to drive by it. The purpose of this study is to build up reliance on the system with changing of element parameters for vibration characteristics of balancing type vibratory conveyor by using F.E.M. modeling. For investigating the natural frequency, modal testing is performed by using impact hammer, accelerometer and LMS/Vibration Analysis System. Experimental results are compared with F.E.M results. The results of the comparisons within the errors of less than 2 percent can verify the reliability of the F.E.M. analysis of the system. Also we can verify that the characteristics of natural frequency have linearly decreased(-6%) as adding the mass($50{\sim}600kg$). We can find that controlling driving frequency is necessary for triggering the natural frequency, but natural frequency is less affected by adding the mass on the balancing weight.

• 대한기계학회논문집
• /
• 제16권4호
• /
• pp.649-657
• /
• 1992

본 연구에서는 스테핑 모터의 토크특성과 전동시스템의 미스얼라인 먼트에 의 한 플리편심을 고려하여 스페핑 모터 구동 타이밍벨트 전동시스템의 전동오차에 관한 이론 및 실험적 연구를 수행하고, 전동오차 감소를 위한 설계 개선 기초자료를 얻고자 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.909-910
• /
• 2009

• 대한임상검사과학회지
• /
• 제45권2호
• /
• pp.43-47
• /
• 2013

This study was designed to evaluate the prevalence of ESBL genes and monitor antimicrobial resistance pattern in Escherichia coli, isolated from a hospital and a community. We tested 200 E. coli strains isolated in the hospitals and community in Chungcheong area from January to March 2012. Antimicrobial susceptibilities were tested by using the disk diffusion method. A search for ESBL genes was conducted by PCR amplification, and the genotypes were determined by direct nucleotide sequence analysis of the amplified products. An Epidemiologic study was performed by repetitive extragenic palindromic sequence-based PCR (REP-PCR). The percentage of ESBL-producing isolates was 17% for hospital associated E. coli and 11% for community associated E. coli. The ESBL gene sequencing results showed that the most common ESBL in E. coli was CTX-M-14 (19/28), followed by CTX-M-15 (9/28). The REP-PCR study also showed the genetic diversity, but there was no difference between the hospital and community associated E. coli. In this study, the most common types of class A ESBLs identified were CTX-M in the hospital and the community in Chungcheong area. ESBL-producing E. coli isolates showed diverse clonality.

• Geomechanics and Engineering
• /
• 제35권5호
• /
• pp.539-554
• /
• 2023

This article is dedicated to the pursuit of establishing a robust empirical relationship that allows for the estimation of in-situ modulus of deformations (E_m and G_m) within sedimentary rock slope masses through the utilization of Q_slope values. To achieve this significant objective, an expansive and thorough methodology is employed, encompassing a comprehensive field survey, meticulous sample collection, and rigorous laboratory testing. The study sources a total of 26 specimens from five distinct locations within the South Pars (known as Assalouyeh) region, ensuring a representative dataset for robust correlations. The results of this extensive analysis reveal compelling empirical connections between E_m, geomechanical characteristics of the rock mass, and the calculated Q_slope values. Specifically, these relationships are expressed as follows: E_m = 2.859 Q_slope + 4.628 (R² = 0.554), and G_m = 1.856 Q_slope + 3.008 (R² = 0.524). Moreover, the study unravels intriguing insights into the interplay between in-situ deformation moduli and the widely utilized Rock Mass Rating (RMR) computations, leading to the formulation of equations that facilitate predictions: RMR = 18.12 E_m0.460 (R² = 0.798) and RMR = 22.09 G_m0.460 (R² = 0.766). Beyond these correlations, the study delves into the intricate relationship between RMR and Rock Quality Designation (RQD) with Qslope values. The findings elucidate the following relationships: RMR = 34.05e^0.33Qslope (R² = 0.712) and RQD = 31.42e^0.549Qslope (R² = 0.902). Furthermore, leveraging the insights garnered from this comprehensive analysis, the study offers an empirically derived support system tailored to the distinct characteristics of discontinuous rock slopes, grounded firmly within the framework of the Q_slope methodology. This holistic approach contributes significantly to advancing the understanding of sedimentary rock slope stability and provides valuable tools for informed engineering decisions.

• Structural Engineering and Mechanics
• /
• 제73권3호
• /
• pp.259-269
• /
• 2020

In this paper, bending-stretching analysis of thick functionally graded piezoelectric rectangular plates is studied using the higher-order shear and normal deformable plate theory. On the basis of this theory, Legendre polynomials are used for approximating the components of displacement field. Also, the effects of both normal and shear deformations are encountered in the theory. The governing equations are derived using the principle of virtual work and variational approach. It is assumed that plate is made of piezoelectric materials with functionally graded distribution of material properties. Hence, exponential function is used to modify mechanical and electrical properties through the thickness of the plate. Finally, the effect of material properties, electrical boundary conditions and dimensions are investigated on the static response of plate. Also, it is shown that results of the presented model are close to the three dimensional elasticity solutions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.86-88
• /
• 2003

The efficiency of electric machine is important due to increase of interest about energy saving. Single Phase Line Start Permanent Magnet Synchronous Motor has high efficiency and power factor. LSPMSM offer a high efficiency as compared induction motor which are used in the home appliance. The analysis and design of LSPMSM is difficult because of unbalanced rotating magnetic field, nonlinear characteristics and rotor saliency. To consider these effects, F.E.M(Finite Element Methods) is coupled equivalent circuit methods. In this paper, a methods of analysis and design using F.E.M and equivalent circuit is represented.