• Journal of Korea Water Resources Association
• /
• v.37 no.11
• /
• pp.969-978
• /
• 2004

According to the report of hydrologic modeling study, from a quantitative point of view, a lumped model is more efficient than a distributed model. A distributed model has to simplify geospatial characteristics for the shake of restricted application on computer calculation and field observation. In this reason, a distributed model can not help having some errors of water quantity modelling. However, considering a distribution of rainfall-runoff reflected spatial characteristics, a distributed model is more efficient to simulate a flow of surface water, The purpose of this study is modeling of spatial rainfall-runoff of surface water using grid based distributed model, which is consisted of storage function model and essential basin-channel parameters( slope, flow direction & accumulation), and that procedure is able to be executed at a personal computer. The prototype of this model is developed in Heongseong Multipunose Dam basin and adapted in Hapchon Multipurpose Dam basin, which is larger than the former about five times. The efficiency coefficients in result of two dam basin simulations are more than about 0.9, but ones at the upstream water level gauge station meet with bad result owing to overestimated rating curves in high water level. As a result of this study, it is easily implemented that spatially distributed rainfall-runoff model using GIS, and geophysical characteristics of the catchment, hereafter it is anticipated that this model is easily able to apply rainfall data by real time.

• Journal of Korean Society on Water Environment
• /
• v.25 no.4
• /
• pp.589-596
• /
• 2009

The spectroscopic characteristics and chemical oxygen demand (COD) oxidation efficiencies were investigated for dissolved organic matters (DOM) from diverse sources, which may indirectly affect the concentrations and the quality of DOM found in watersheds. The DOM investigated for this study showed a wide range of the percent distributions of refractory organic matter (R-OM) from 8 to 100%. Relatively high R-OM distributions were observed for the DOM with the source of head water, sediments, paddy soils, field soils, and treated sewage whereas the DOM from livestock waste, reed, weeds, algae, and attached algae exhibited lower R-OM percent distributions. The percent distribution of R-OM had positive correlations with specific UV absorbance (SUVA) and humidification indices (HIX) of DOM. The investigated DOM was classified into four different source groups (i.e., biota, vegetables, soils, sediments) by comparing the synchronous fluorescence spectra. The DOM group from biota source was characterized by a prominent presence of protein-like fluorescence (PLF) whereas fulvic-like fluorescence (FLF) was additionally observed for vegetable-source DOM. FLF became significant for the DOM from both soils and sediments although no PLF was found for soil-derived DOM. A range of COD oxidation efficiency was observed for the various DOM, ranging from 36 to 94% and from 65 to 125% for $COD_{Mn}$ and $COD_{Cr}$, respectively. The results indicate that $COD_{Cr}$ reflects the higher OM concentration than $COD_{Mn}$. However, 95% confidence intervals of the COD oxidation efficiencies were similar for the two types of COD, suggesting that $COD_{Cr}$ may not be the superior OM index to $COD_{Mn}$ in terms of the variability of the oxidation efficiency. No significant correlations were obtained between COD oxidation efficiencies and the spectroscopic characteristics of DOM for this study.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.3
• /
• pp.291-297
• /
• 1984

The peanut, unlike other plants, has three distinct steps in the reproductive process. These are the flowers, the peg and the fruit. This research was designed in the field to determine the difference of fruiting habit for each of plant types of peanut (Arachis hypogaea L.) in peanut culture limiting region. Eight cultivars representing four plant types, i.e., Virginia, Spanish, Valencia and Shinpung types. Number of pegs per plant produced in order of Spanish, Valencia, Virginia, Shinpung, Virginia type. The Virginia small seed type produced the most pods per plant. The shinpung type showed more percentage of matured pod than other types and early pot-set habit. Distribution of mature pods for each of branch positions to total mature pods occupied 63% on two cotyledonary branchs, 34% on 3rd to 5th branchs, 3% on over 6th branchs. Shinpung type was considered more favorable plant type than other types for breeding of early maturing high yielding variety because of early pot-set and high percentage of mature pod.

• Korean Journal of Ecology and Environment
• /
• v.50 no.1
• /
• pp.126-136
• /
• 2017

We describe characteristics of diversity and distribution of oak forests on the Daegok-cheon gorge of the Southeastern Korean Peninsula, the oldest prehistoric site, in view of a sort of food resources of acorns. The $Z{\ddot{u}}rich$-Montpellier School's method was adopted for field investigation on the oak dominant stands. A total of 20 phytosociological $relev\acute{e}s$ composed of 193 taxa were analyzed by syntaxonomy and ecological flora. The Daegok-cheon's oak forests occupied 36.9% ($513,374m^2$) of the surveyed area, and its 99% ($507,677m^2$) was Quercus variabilis and Q. serrata stands. Oak forests of the Daegok-cheon gorge are a kind of regional vegetation type characterizing by the high relative net contribution degree (r-NCD) of Platycarya strobilacea and Sapium japonicum, which are an edaphic type of the xerophilous and thermophilic oak forests. The region of the Daegok-cheon petroglyphs is defined as an ecoregion with rich acorn supply and abundant water resources, and the warmer environment, which attracts prehistoric man.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.1
• /
• pp.36-48
• /
• 2008

To repair bone defects in the oral and maxillofacial field, bone grafts including autografts, allografts, and artificial bone are used in clinical dentistry despite several disadvantages. The purpose of this study was to evaluate new bone formation and healing in rat calvarial bone defects using hydroxyapatite (HA, $Ca_{10}[PO_4]_6[OH]_2,\;Bongros^{(R)}$, Bio@ Co., KOREA) and tricalcium phosphate (${\beta}-TCP,\;Ca_3[PO_4]_2$, Sigma-Aldrich Co., USA) mixed at various ratios. Additionally, this study evaluated the effects of type I collagen (Rat tail, BD Biosciences Co., Sweden) as a basement membrane organic matrix. A total of twenty, 8-week-old, male Sprague-Dawley rats, weighing 250-300g, were divided equally into a control group (n=2) and nine experimental groups (n=2, each). Bilateral, standardized transosseous circular calvarial defects, 5.0 mm in diameter, were created. In each experimental group, the defect was filled with HA and TCP at a ratio of 100:0, 80:20, 70:30, 60:40, 50:50, 40:60, 30:70, 20:80, and 0:100 with or without type I collagen. Rats were sacrificed 4 and 8 weeks post-operation for radiographic (standardized plain film, Kodak Co., USA), histomorphologic (H&E [Hematoxylin and Eosin], MT [Masson Trichrome]), immunohistochemical staining (for BMP-2, -4, VEGF, and vWF), and elementary analysis (Atomic absorption spectrophotometer, Perkin Elmer AAnalyst $100^{(R)}$). As the HA proportion increased, denser radiopacity was seen in most groups at 4 and 8 weeks. In general radiopacity in type I collagen groups was greater than the non-collagen groups, especially in the 100% HA group at 8 weeks. No new bone formation was seen in calvarial defects in any group at 4 weeks. Bridging bone formation from the defect margin was marked at 8 weeks in most type I collagen groups. Although immunohistochemical findings with BMP-2, -4, and VEGF were not significantly different, marked vWF immunoreactivity was present. vWF staining was especially strong in endothelial cells in newly formed bone margins in the 100:0, 80:20, and 70:30 ratio type I collagen groups at 8 weeks. The calcium compositions from the elementary analysis were not statistically significant. Many types of artificial bone have been used as bone graft materials, but most of them can only be applied as an inorganic material. This study confirmed improved bony regeneration by adding organic type I collagen to inorganic HA and TCP mixtures. Therefore, these new artificial bone graft materials, which are under strict storage and distribution systems, will be suggested to be available to clinical dentistry demands.

• Ocean Systems Engineering
• /
• v.6 no.1
• /
• pp.61-97
• /
• 2016

This is the second of two papers on the 3D numerical modeling of nearshore hydro- and morphodynamics. In Part I, the focus was on surf and swash zone hydrodynamics in the cross-shore and longshore directions. Here, we consider nearshore processes with an emphasis on the effects of oceanic forcing and beach characteristics on sediment transport in the cross- and longshore directions, as well as on foreshore bathymetry changes. The Delft3D and XBeach models were used with four turbulence closures (viz., ${\kappa}-{\varepsilon}$, ${\kappa}-L$, ATM and H-LES) to solve the 3D Navier-Stokes equations for incompressible flow as well as the beach morphology. The sediment transport module simulates both bed load and suspended load transport of non-cohesive sediments. Twenty sets of numerical experiments combining nine control parameters under a range of bed characteristics and incident wave and tidal conditions were simulated. For each case, the general morphological response in shore-normal and shore-parallel directions was presented. Numerical results showed that the ${\kappa}-{\varepsilon}$ and H-LES closure models yield similar results that are in better agreement with existing morphodynamic observations than the results of the other turbulence models. The simulations showed that wave forcing drives a sediment circulation pattern that results in bar and berm formation. However, together with wave forcing, tides modulate the predicted nearshore sediment dynamics. The combination of tides and wave action has a notable effect on longshore suspended sediment transport fluxes, relative to wave action alone. The model's ability to predict sediment transport under propagation of obliquely incident wave conditions underscores its potential for understanding the evolution of beach morphology at field scale. For example, the results of the model confirmed that the wave characteristics have a considerable effect on the cumulative erosion/deposition, cross-shore distribution of longshore sediment transport and transport rate across and along the beach face. In addition, for the same type of oceanic forcing, the beach morphology exhibits different erosive characteristics depending on grain size (e.g., foreshore profile evolution is erosive or accretive on fine or coarse sand beaches, respectively). Decreasing wave height increases the proportion of onshore to offshore fluxes, almost reaching a neutral net balance. The sediment movement increases with wave height, which is the dominant factor controlling the beach face shape.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.4
• /
• pp.270-279
• /
• 2017

Regional assessment of crop productivity using a gridded simulation approach could aid policy making and crop management. Still, little effort has been made to develop the systems that allows gridded simulations of crop growth using ORYZA 2000 model, which has been used for predicting rice yield in Korea. The objectives of this study were to develop a series of data processing modules for creating input data files, running the crop model, and aggregating output files in a region of interest using gridded data files. These modules were implemented using C++ and R to make the best use of the features provided by these programming languages. In a case study, 13000 input files in a plain text format were prepared using daily gridded weather data that had spatial resolution of 1km and 12.5 km for the period of 2001-2010. Using the text files as inputs to ORYZA2000 model, crop yield simulations were performed for each grid cell using a scenario of crop management practices. After output files were created for grid cells that represent a paddy rice field in South Korea, each output file was aggregated into an output file in the netCDF format. It was found that the spatial pattern of crop yield was relatively similar to actual distribution of yields in Korea, although there were biases of crop yield depending on regions. It seemed that those differences resulted from uncertainties incurred in input data, e.g., transplanting date, cultivar in an area, as well as weather data. Our results indicated that a set of tools developed in this study would be useful for gridded simulation of different crop models. In the further study, it would be worthwhile to take into account compatibility to a modeling interface library for integrated simulation of an agricultural ecosystem.

• Korea Trade Review
• /
• v.42 no.4
• /
• pp.69-91
• /
• 2017

Since the global financial crisis, major countries have been executing policies related to two top-priority goals to create more jobs: revitalization of entrepreneur activity and the cultivation of small and medium-sized companies. In South Korea, the interest of policy makers is increasingly focusing on the role of SMEs that have a technological competitive edge in the realization of a "job-centered creative economy." Due to the nature of the field, the health and medical industry requires a particularly long time until the achievement of industrialization, Also, because of the complex distribution structure, it is essential for related government ministries and institutions to jointly devise strategies. A lack of policy supports for the industry has thus far resulted in its development being relegated for the most part of small and medium-sized companies, which consequently means low global competitiveness. Now is the time for the South Korean government to provide the revolutionary supported options and strategies. This study aims to propose a general policy direction and policy areas for the cultivation of Korea's small and medium-sized companies in the healthcare industry into global small giant companies through an exploration of the German case. It is crucial to first cultivate the international competitiveness of Korean small and medium-sized companies (as in the case of Germany) so that they can grow into global small giant companies. Another important task is the creation of an environment that expedites the qualitative growth of promising SMEs as well as technological development. After securing competitiveness in terms of both product quality and technology in the global health market, substantive policy supports will be necessary to cultivate global small giant companies that are export-based (e.g. job creation effect, sales value added).

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.391-393
• /
• 2022

In recent years, technologies forecasting demand based on deep learning and big data have accelerated the smartification of the field of e-commerce, logistics and distribution areas. In particular, ports, which are the center of global transportation networks and modern intelligent logistics, are rapidly responding to changes in the global economy and port environment caused by the 4th industrial revolution. Port traffic forecasting will have an important impact in various fields such as new port construction, port expansion, and terminal operation. Therefore, the purpose of this study is to compare the time series analysis and deep learning analysis, which are often used for port traffic prediction, and to derive a prediction model suitable for the future container prediction of Busan Port. In addition, external variables related to trade volume changes were selected as correlations and applied to the multivariate deep learning prediction model. As a result, it was found that the LSTM error was low in the single-variable prediction model using only Busan Port container freight volume, and the LSTM error was also low in the multivariate prediction model using external variables.

• Korean Journal of Environment and Ecology
• /
• v.38 no.1
• /
• pp.22-47
• /
• 2024

This study aims to reveal the distribution of native plants, rare plants, and specialty plants and provides basic data for efficient ecosystem management through a survey of the flora in Mt. Chijae (Gamagol) and its adjacent areas in Damyang-gun, Jeonnam-do, while also identifying useful plants in the eco-city Damyang-gun for distinctive garden plants. A total of 21 field surveys were conducted from March 2022 to June 2023 to collect and identify 492 taxa consisting of 101 families, 304 genera, 444 species, 10 subspecies, 35 varieties, and 3 formas. The analysis of the prepared sample list showed 14 taxa designated as specialty plants, 9 taxa designated as rare plants by the Korea Forest Service, 7 taxa designated as the national red (i.e., endangered) plants by the Ministry of Environment, and 68 taxa with phylogenetic specific species, of which 45 taxa for Grade I, 5 taxa for Grade II, 16 taxa for Grade III, and 2 taxa for Grade IV were confirmed. The list included 155 taxa of biological resources subject to export approval by the Ministry of Environment and 38 taxa of alien plants of which 7.7 percent were naturalized, and the urbanization index was 6.1 percent. Four taxa were ecosystem-disturbing invasive alien plants designated by the Ministry of Environment introduced artificially or naturally from abroad. This study is expected to contribute to creating unique and attractive landscapes in Damyang if the specific plants found in Mt. Chijae are grown and planted in city gardens.