• 한국생산제조학회지
• /
• 제19권4호
• /
• pp.553-561
• /
• 2010

In flat panel display or semiconductor industries, they install the equipments with fine line width and high throughput for fabrication and inspection. The equipments are required to have the linear stage which can position the work-piece with high speed, fine resolution on wide range of motion. In this paper, a precision planar linear XY stage is proposed. The stage has a symmetric planar window configuration and is guided by air-bearings on granite plate. The symmetric planar window configuration makes the stage has robustness against dynamic and thermal disturbances. The air-bearings let the stage move smooth on straight guide bar and flat granite surface. The stage is actuated by linear motor with Halbach magnet array (HMA). HMA generates more confined magnetic flux than conventional array. The linear motors are optimized by using sequential quadratic programming (SQP) with the several constraints that are thermal dissipation, required power, force ripple and so on. The planar linear XY stage with the symmetric planar configuration and the linear motors is implemented and then the performance such as force ripple, resolution and stroke are evaluated.

• 분석과학
• /
• 제16권1호
• /
• pp.82-89
• /
• 2003

Isotope dilution mass spectrometry (IDMS) was applied to the determination of Ni, Cr, Mo in low alloy steel reference materials. The Mo isotope ratio measurement was performed by dynamic reaction cell inductively coupled plasma mass spectrometry (DRC-ICP/MS) using ammonia as a reaction cell gas. In the case of Ni and Cr measurement, all data were obtained at medium resolution mode (m/${\Delta}m=3000$) of double focusing sector field high resolution inductively coupled plasma mass spectrometry (HR-ICP/MS). For the method validation of the technique was assessed using the certified reference materials such as NIST SRM 361, NIST SRM 362, NIST SRM 363, NIST SRM 364, NIST SRM 36b. This method was applied to the determination of Ni, Cr and Mo in low alloy steel sample (CCQM-P25) provided by NMIJ for international comparison study.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2002년도 학술발표회 논문집(II)
• /
• pp.1187-1194
• /
• 2002

In this study, we have simulated regional climate over East Asia using dynamical downscaling For dynamic downscaling experiments for regional climate simulation, MM5method. with 27 km horizontal resolution and 18 layers of sigma-coordinate in vertical is nested within global-scale NCEP reanalysis data with 2.5。${\times}$2.5。 resolution in longitude and latitude. In regional simulation, January and July, 1979 monthly mean features have been obtained by both continuous integration and daily restart integration driven by updating the lateral boundary forcing at 6-hr intervals from the NCEP reanalysis data using a nudging scheme with the updating design of initial and boundary conditions in both continuous and restart integrations. In result, we may successfully generated regional detail features which might be forced by topography, lake, coastlines and land use distribution from a regional climate. There is no significant difference in monthly mean features either integrate continuously or integrate with daily restart. For climatologically long integration, the initial condition may not be significantly important. Accordingly, MM5 can be integrated for a long period without restart frequently, if a proper lateral boundary forcing is given.

• 비파괴검사학회지
• /
• 제27권6호
• /
• pp.556-562
• /
• 2007

This paper presents the use of a novel fiber optic accelerometer system to monitor ambient vibration (both wind-induced one and vehicle-induced) of a real bridge structure. This sensor system integrates the $Moir\'{e}$ fringe phenomenon with fiber optics to achieve accurate and reliable measurements. A low-cost signal processing unit implements unique algorithms to further enhance the resolution and increase the dynamic bandwidth of the sensors. The fiber optic accelerometer has two major benefits in using this fiber optic accelerometer system for monitoring civil engineering structures. One is its immunity to electromagnetic (EM) interference making it suitable for difficult applications in such environments involving strong EM fields, electrical spark-induced explosion risks, and cabling problems, prohibiting the use of conventional electromagnetic accelerometers. The other is its ability to measure both low- and high-amplitude vibrations with a constantly high resolution without pre-setting a gain level, as usually required in a conventional accelerometer. The second benefit makes the sensor system particularly useful for real-time measurement of both ambient vibration (that is often used for structural health monitoring) and strong motion such as earthquake. Especially, the semi-strong motion and the small ambient one are successfully simulated and measured by using the new fiber optic accelerometer in the experiment of the structural health monitoring of a real bridge.

• Journal of Magnetics
• /
• 제12권1호
• /
• pp.35-39
• /
• 2007

A highly sensitive magnetic sensor using the Giant MagnetoImpedance effect has been developed. The sensor performance is studied and estimated. The sensor circuitry consists of a square wave generator (driving source), a sensing element in a form of composite wire of a 25 $\mu$m copper core electrodeposited with a thin layer of soft magnetic material ($Ni_{80}Fe_{20}$), and two amplifier stages for improving the gain, switching mechanism, scaler circuit, an AC power source driving the permeability of the magnetic coating layer of the sensing element into a dynamic state, and a signal pickup LC circuit formed by a pickup coil and an capacitor. Experimental studies on sensor have been carried out to investigate the key parameters in relation to the sensor sensitivity and resolution. The results showed that for high sensitivity and resolution, the frequency and magnitude of the ac driving current through the sensing element each has an optimum value, the resonance frequency of the signal pickup LC circuit should be equal to or twice as the driving frequency on the sensing element, and the anisotropy of the magnetic coating layer of the sensing wire element should be longitudinal.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2020년도 학술발표회
• /
• pp.122-122
• /
• 2020

Urban flood simulation plays a vital role in national flood early warning, prevention and mitigation. In recent studies on 2-dimensional flood modeling, the integrated run-off inundation model is gaining grounds due to its ability to perform in greater computational efficiency. The adaptive quadtree shallow water numerical technique used in this model implements the adaptive mesh refinement (AMR) in this simulation, a procedure in which the grid resolution is refined automatically following the flood flow. The method discounts the necessity to create a whole domain mesh over a complex catchment area, which is one of the most time-consuming steps in flood simulation. This research applies the dynamic grid refinement method in simulating the recent extreme flood events in Metro Manila, Philippines. The rainfall events utilized were during Typhoon Ketsana 2009, and Southwest monsoon surges in 2012 and 2013. In order to much more visualize the urban flooding that incorporates the flow within buildings and high-elevation areas, Digital Surface Model (DSM) resolution of 5m was used in representing the ground elevation. Results were calibrated through the flood point validation data and compared to the present flood hazard maps used for policy making by the national government agency. The accuracy and efficiency of the method provides a strong front in making it commendable to use for early warning and flood inundation analysis for future similar flood events.

• 한국중재학회지:중재연구
• /
• 제15권2호
• /
• pp.3-35
• /
• 2005

The meaning of Online ADR lies in the prompt and economical resolution of disputes by applying the information/communication element (Internet) to existing ADR. However, if the promptness and economical efficiency are overemphasized, the fairness and appropriateness of dispute resolution may be compromised and consequently Online ADR will be belittled and criticized as second-class trials. In addition, as communication is mostly made using texts in Online ADR it is difficult to investigate cases and to create atmosphere and induce dynamic feelings, which are possible in the process of dispute resolution through face-to-face contact. Despite such difficulties, Online ADR is expanding its area not only in online but also in offline due to its advantages such as promptness, low expenses and improved resolution methods, and is expected to develop rapidly as the electronic government decided to adopt it in the future. Accordingly, the following points must be focused on for the continuous First, in the legal and institutional aspects for the development of Online ADR, it is necessary to establish a framework law on ADR. A framework law on ADR comprehending existing mediation and arbitration should be established and it must include contents of Online ADR, which utilizes electronic communication means. However, it is too early to establish a separate law for Online ADR because Online ADR must develop based on the theoretical system of ADR. Second, although Online ADR is expanding rapidly, it may take time to be settled as a tool of dispute resolution. As discussed earlier, additionally, if the amount of money in dispute is large or the dispute is complicated, Online ADR may have a negative effect on the resolution of the dispute. Thus, it is necessary to apply Online ADR to trifle cases or domestic cases in the early stage, accumulating experiences and correcting errors. Moreover, in order to settle numerous disputes effectively, Online ADR cases should be analyzed systematically and cases should be classified by type so that similar disputes may be settled automatically. What is more, these requirements should reflected in developing Online ADR system. Third, the application of Online ADR is being expanded to consumer disputes, domain name disputes, commercial disputes, legal disputes, etc., millions of cases are settled through Online ADR, and 115 Online ADR sites are in operation throughout the world. Thus Online ADR requires not temporary but continuous attention, and mediators and arbitrators participating in Online ADR should be more intensively educated on negotiation and information technologies. In particular, government-led research projects should be promoted to establish Online ADR model and these projects should be supported by comprehensive researches on mediation, arbitration and Online ADR. Fourth, what is most important in the continuous development and expansion of Online ADR is to secure confidence in Online ADR and advertise Online ADR to users. For this, incentives and rewards should be given to specialists such as lawyers when they participate in Online ADR as mediators and arbitrators in order to improve their expertise. What is more, from the early stage, the government and public institutions should have initiative in promoting Online ADR so that parties involved in disputes recognize the substantial contribution of Online ADR to dispute resolution. Lastly, dispute resolution through Online ADR is performed by organizations such as Korea Institute for Electronic Commerce and Korea Consumer Protection Board and partially by Korean Commercial Arbitration Board. Online ADR is expected to expand its area to commercial disputes in offline in the future. In response to this, Korean Commercial Arbitration Board, which is an organization for commercial dispute resolution, needs to be restructured.

• 전자공학회논문지
• /
• 제53권11호
• /
• pp.73-81
• /
• 2016

일반적으로 적외선 열화상 영상은 가시광선 영상보다 약한 선명도를 가지며, 디테일 정보도 거의 없다. 그래서 종래 영상확대 알고리즘 방법으로 적외선 영상을 확대할 경우 가시광 영상에 비해 효과적이지 않다. 이런 문제점을 해결하기 위해 본 논문은 입력 적외선 영상을 ADRC 기반 초고해상도 기법으로 일차적으로 확대하고, 대응하는 가시광선 영상과 융합하는 방법을 제안한다. 제안하는 알고리즘은 크게 확대 과정과 융합 과정으로 나뉜다. 먼저 입력된 적외선 영상을 ADRC 기반의 초고해상도 알고리즘으로 확대한다. 사전의 학습과정에서 고해상도 영상들에 소위 pre-emphasis를 적용한 후 학습을 함으로써 선명도 향상을 꾀했다. 융합 과정에서는 먼저 입력 IR영상과 대응하는 가시광선 영상에서 고주파 정보를 추출하고, IR영상의 복잡도에 따라 적응적으로 상기 추출된 고주파 정보를 합성하는 방식으로 최종적인 확대 적외선 영상이 얻어진다. 모의 실험 결과 제안 알고리즘은 최신 SR기법 중 하나인 A+기법보다 JNB수치가 평균 0.2184만큼 높은 우수한 정량적 결과를 보인다. 뿐만 아니라 주관적 화질에서도 상당한 우위를 보인다.

• 핵의학기술
• /
• 제20권2호
• /
• pp.49-53
• /
• 2016

최근 Cadmium-zinc-telluride (CZT) 반도체를 이용한 심장전용 감마카메라가 심장 핵의학 검사에 사용되고 있다. 본 연구는 기존 NaI(Tl) 신틸레이터를 사용한 감마카메라와 성능을 비교해 보고자 한다. CZT반도체를 사용한 심장전용 감마카메라(DSPECT, Spectrum-dynamic)와 범용 신틸레이터 SPECT 감마카메라(Infinia, GE)를 사용하여 연구를 진행했다. 방사성 동위원소는 $^{99m}TcO^{-4}$를 사용하고, 일반 임상 심장핵의학 검사에 사용된 조건을 실험 조건으로 설정 했다. NEMA 2001, 3 line phantom을 사용하여 반치폭(full width at half maximum, FWHM)을 측정하여 공간분해능(Spatial resolution)을 비교했다. 심장 팬텀을 사용하여 대조도대잡음비(Contrast to noise, CNR)를 비교하여 영상을 평가했다. 그리고 팬텀의 시간 당 MBq당 계수를 측정하여 민감도도 평가했다. NaI (Tl) 신틸레이터를 사용한 범용SPECT 감마카메라와 CZT 반도체를 사용한 심장 전용 감마카메라의 영상평가에서 감도는 $52.83counts{\cdot}sec^{-1}{\cdot}MBq^{-1}$과 $195.83counts{\cdot}sec^{-1}{\cdot}MBq^{-1}$로 나왔고, 공간분해능은 16.90 mm과 9.47 mm로 나왔다. 그리고 대조도대 잡음비는 3.6 과 4.2 로 나왔다. 기존 카메라를 이용한 심장 핵의학 영상과 비교하여 CZT를 사용한 심장 전용 감마카메라는 감도 및 공간분해능, 대조도대잡음비가 기존 감마카메라와 비교하여 월등하여 임상에서 환자의 피폭선량 저감과 검사 시간 단축, 높은 분해능의 영상으로 환자 만족도에 큰 영향을 줄 것으로 사료 된다.

• 전자공학회논문지SC
• /
• 제39권4호
• /
• pp.16-24
• /
• 2002

본 논문에서는 높은 해상도와 고속 신호 샘플링을 위해 병합 캐패시터 스위칭(merged-capacitor switching：MCS) 기법을 적용한 10b 120 MSample/s CMOS 파이프라인 A/D 변환기(analog-to- digital converter：ADC) 회로를 제안한다. 제안하는 ADC의 전체 구조는 응용되는 시스템의 속도, 해상도 및 면적 등의 사양을 고려하여 다단 파이프라인 구조를 사용하였고, MDAC(multiplying digital-to- analog converter)의 캐패시터 수를 50 %로 줄임으로써 해상도와 동작 속도를 동시에 크게 향상시킬 수 있는 MCS 기법을 적용하였다. 제안하는 ADC는 0.25 um double-poly five-metal n-well CMOS 공정을 이용하여 설계 및 제작되었고, 시제품 ADC의 DNL(differential nonlinearity)과 INL(integral nonlinearity)은 각각 ${\pm}$0.40 LSB, ${\pm}$0.48 LSB 수준을 보여준다. 100 MHz와 120 MHz 샘플링 주파수에서 각각 58 dB와 53 dB의 SNDR(signal-to-noise-and-distortion ratio)을 얻을 수 있었고, 100 MHz 샘플링 주파수에서 입력 주파수가 나이퀴스트(Nyquist) 입력인 50 MHz까지 증가하는 동안 54 dB 이상의 SNDR과 68 dB 이상의 SFDR(spurious-free dynamic range)을 유지하였다. 입출력단의 패드를 제외한 칩 면적은 3.6 $mm^2$(＝ 1.8 mm ${\times}$ 2.0 mm)이며, 최대 동작 주파수인 120 MHz 클럭에서 측정된 전력 소모는 208 mW이다.