• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1997년도 추계학술대회논문집
• /
• pp.398-405
• /
• 1997

과거 8년간의(1985-1992) 통계에 의하면 정면과 측면 충돌시 구속 시스텡의 하나인 Airbag장착 차량의 사망자 및 중상자 수가 현저히 감소하고 있는 것으로 나타나고있다. 그 러나 최근 소비자로 부터의 Airbag에 관한 불만을 보고 받고 있다. 즉 구속효과를 발휘함에 있어 부수적으로 인체 부상을 유발하고 있다는 것이다. 사망내지는 심각한 부상은 방지하고 있으나 경미한 부상은 오히려 증가하고 또한 신체가 적은 여성 운전자나 6세 이하의 어린이 에게는 심각한 부상의 우려가 있다는 것이다. 본 연구에서는 구속시스템의 총아인 Airbag 시스템의 심각한 부수적인 부상 보고를 입증하기 위하여 우리나라 어린이 6세 신체를 기준 으로하여 구속시스템을 착용하지 않았을 경우(실제로 많은 경우), seat belt만 착용시, Airbag만 작용시, 그리고 seat belt와 Airbag을 동시에 사용할 때를 컴퓨터 Simulation Package 이용 신체 dynamic을 모의실험 하였다. 실험결과, 기존에 알려진바와 같이 구속시스템을 사용하지 않았을 경우에 부상은 매우 컸다. 신체 사이즈가 작은 어린이 혹은 여성 운전자의 경우 Seat belt만을 사용한 경우는 Airbag만을 사용한 경우보다는 부상정도가 약간 경미하였으나 두 경우 모두 인체가 구속시스템의 구속 범위를 이탈하여 구속 시스템으로써의 역할을 충분히 하지 못하고 있었다. 특히 Seat belt와 Airbag을 동시에 사용하였을시에도 Airbag이 충분히 개선된 이후라도 신체 사이즈가 작은 경우에는 흉부부위에 의한 충격 흡수가 먼저 이루어지지 못하고, 머리에 먼저 Airbag이 접촉이 되어 충격 흡수 역할보다는 반동효과가 더 커서 머리 및 몸체가 뒤로 Rebound 하는 효과로 머리, 혹은 목의 신체 부상한계를 넘고 있어 큰 부상 내지는 사망에 이르고 있음을 알 수 있었다. 사료된다.의 결과는 자전거 에르고노미터의 결과가 트레드밀의 결과에 87.60%정도 나타났다.음을 관찰하였다. 특히 vitamin C와 E의 병용투여는 상승적으로 적용하여 간세포손상을 더욱 억제시킴을 알 수 있었다.mance and on TFP(Total Factor Productivity) growth which is a pure measure of firm performance. To utilize the advantage of panel data, FEM(Fixed Effect Model) and REM(Random Effect Model) were used. The empirical result shows that the entropy index as a measurement of inter-business relatedness is not significant but technological relatedness index is significant. OLS estimates on pooled data were considerably different from FEM or REM estimates on panel data. By introducing interaction effect among the three variables for business portfolio properties, we obtained three findings. First, only VI (Vertical integration) has a significant positive correlation with ROS. Second, when using TFP growth as an dependent variable, both TR(Technological Relatedness) and f[ are significant and positively rel

• 산업노동연구
• /
• 제23권2호
• /
• pp.169-193
• /
• 2017

본 연구는 우리나라에서 동학적 고용안정성을 진단하기 위해서 고용유지율에 영향을 미치는 결정요인을 분석하였다. 고용유지 결정요인 분석을 위해서 사업체 패널자료와 고용보험 이력자료를 연계하고, 다층적 위계적 자료 분석에 적절한 다층 분석모형을 활용하여 결정요인을 분석하였다. 분석결과, 우리나라에서 고용안정성이 매우 낮은 것은 임금수준이 낮고 비정규직 활용수준이 높은 주변부 부문이 광범위하게 존재하기 때문으로 추정된다. 또한 우리나라의 고용구조는 고용과 실업이 반복되는 단기간 고용이 상당한 영역을 차지하면서 전반적으로 고용안정성이 약한 것으로 평가된다. 이러한 사실은 기업이나 개인적 차원에서 숙련향상 및 숙련형성기회가 제한되면서 지속적인 성장 제약요인으로 작용할 가능성이 높으며, 이에 대한 적극적 대응책으로 고용구조의 질적 개선노력이 요구된다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.317-323
• /
• 2000

The purpose of this study is to compare the seismic resistant capacity inherent in ductile moment resisting frames using two different joint modeling. The difference between these two models is the capability for considering the panel zone deformation. For this purpose, 5 story steel moment frame is designed in compliance to the Korean seismic design provisions and the steel structure design standard. Nonlinear Static Procedure(NSP) and Nonlinear Dynamic Procedure(NDP) of this structure are carried out using two different joint models. Based on the results of NSP and NDP, the sensitivity of the response to analytical modeling is appraised. Also, it is proposed that for the highrise steel structures, the joint deformation should be accounted properly by the analytical model.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.207-212
• /
• 1993

When constructing highly precise production plants, for example, super LSI plants or semiconductor plants, it is important to take the necessary control countermeasures into consideration to obtain the working microvibration environment, which is directly related to product precision. Working environment of a clean room means vibration-free and there are only ultra-miro vibration which human cannot sense. In order to provide an place having a vibration-free working environment with only ultra-micro vibration it is necessary to posses a great number of vibration isolation technlogies, wide-ranging and abundant survey and teat data, and a high level of knowledge enabling comprehensive judgments to be made. In this study, experimental modal analysis is used to analyze the dynamic characteristics of double floor for vibration-proofing near apparatus which generate vibration. It is concluded that the double floor system with rubber pad inserted between floor panel and pedestal is good for vibration proof.

• 동력기계공학회지
• /
• 제13권3호
• /
• pp.53-58
• /
• 2009

The importance of cost reduction has grown bigger to ensure the competetive power of products in the electric home appliances industry. Thus, it is necessary to assess the reliability due to drop-impact happenning in process of distribution of microwave ovens with the panel and cavity of thinner thickness for cost reduction. In the present study, the drop/impact simulation using the explicit code LS-DYNA3D has been carried out for improving the impact resistance of a microwave oven. This CAE-based design approach can be successfully applied to enhance the deteriorated dynamic behavior under the impact conditions of dropping height 70cm according to ISTA procedure 2A.

• East Asian Economic Review
• /
• 제19권2호
• /
• pp.143-166
• /
• 2015

This paper investigates the empirical evidence on the relationship between financial accessibility and economic growth to test the conventional hypothesis that improved financial accessibility leads to financial development and economic growth. First, we built a dynamic panel model on the relationship between financial accessibility and economic growth with a set of controlled variables. We then used several financial access indicators from 165 countries, collected from 2004 to 2011, applying the generalized method of moments (GMM) estimators to estimate their relationship. From these estimations, we found that high financial accessibility leads to high income in general. In addition, we found that an increase in financial access indicators had a greater impact on economic growth in low-income countries than it did on economic growth in high-income countries.

• 한국화재조사학회지
• /
• 제10권1호
• /
• pp.87-95
• /
• 2007

This paper is proposed a novel method to approximate the maximum power for a photovoltaic inverter system and tracking method. It is designed for power systems application and utilities. The proposed Maximum Power Point Tracking (MPPT) control has the advantage to provide a new simple way to approximate the optimal or rated voltage, the optimal or rated current and maximum power rating produced by a solar panel and the photovoltaic inverter. And this straightforward method will be named linear reoriented coordinates method (LRCM) with the advantage that Pmax and $V_{op}$ can be approximated using the same variable as the dynamic model without using complicate approximations or Taylor series. Furthermore tracking method is improved over 50% photovoltaic efficiency. This paper is proposed MPPT using LRMC and tracking method using weather condition of domestic moderate program technique. This paper is proposed the experimental results to verify the effectiveness of the new methods.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.398-404
• /
• 1998

The acoustic power reduction methods of the vibrating structures are valid to design the quite structure. To calculate the acoustic power, the dynamic responses have to be determined. It is not easy to analyse the structure composed of the corrugated panels. Because of the structural complexity and the many analysing times. To make up for these defects, the equivalent orthogonal panel is presented. Also the acoustic power prediction method of the vibrating structures is proposed. As examples, the equivalent material properties of the corrugated plates are obtained and the acoustic powers of the floor structure are calculated at several frequency regions for KHST.

• 무역학회지
• /
• 제44권1호
• /
• pp.1-15
• /
• 2019

This study aims to analyze the effects of trade on human capital accumulation and economic growth in Korean manufacturing industry. The results of empirical analysis by dynamic panel model are as follows. The increase in exports of skilled labor intensive industries has a positive effect on human capital and economic growth, and the impact of import on human capital accumulation and economic growth has alst a positive impact. The exports of unskilled intensive labor industries have a negative impact on human capital accumulation and economic growth. Imports of unskilled labor intensive industries have negative on human capital accumulation and economic growth. It is difficult to derive statistically significant results for the effects of trade on human capital accumulation and economic growth before and after 2008. However, as a result of the financial crisis in 2008, it seems that the effects have decreased since 2008.

• International Journal of Computer Science & Network Security
• /
• 제21권2호
• /
• pp.181-187
• /
• 2021

The purpose of this study is to examine empirically the short- and long-run determinants of entrepreneurial activity in a sample of 15 the Middle East and North African economies between 2006 and 2018. More specifically, four groups of determinants are considered in the analysis, namely economic, demographic, business environment, and institutional. Given the autoregressive feature of the entrepreneurial activity process, a dynamic panel data model is estimated using the system GMM estimator. Findings reveal that unemployment, trade openness, population density, and economic freedom are the main drivers of new business creation in the short-run, while the cost and number of procedures to start a new business negatively affect entrepreneurship. In the long-run, the same findings hold true. Moreover, education and political stability and the absence of violence/terrorism positively affect entrepreneurial activity. Policy recommendations are accordingly designed.