• 디자인학연구
• /
• 제13권1호
• /
• pp.59-66
• /
• 2000

차량용 항법장치의 기능들이 더욱 고급화, 다양화되면서 사용자가 사용하는 기능이 증가함에 따라 운전자의 입장에서 순간적으로 가장 단순 명확하게 사용할 수 있는 인터페이스가 중요하다. 그러나 현재 사용중인 자동차 항법장치의 사용환경은 이러한 요구들을 만족시키지 못하고 있다. 본 연구는 이러한 문제점을 개선하기 위하여 자동차 항법장치를 구성하는 일반적인 사용환경을 파악하고 이에 따른 경쟁상 제품의 기능을 비교 분석하여 필요한 기능을 추출한 후, 현대자동차(주) 에쿠스(Equus)차량에 적용되고 있는 현대전자(주) HNK-100 LD 모델을 중심으로 객체 모델과 동적 모델을 분석하였다. 아울러 현대자동차(주) 에쿠스에 장착된 현대전자(주) HNK-100LD 모델에서 사용자가 직접 조작하는 행동을 비디오로 촬영하여 분석하는 관찰기법을 사용하여 사용자의 멘탈 모델 (Mental Model)을 분석하여 자동차 항법 장치의 사용자 인터페이스 디자인 가이드 라인을 제시한다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.67-67
• /
• 2018

The 5xxx series aluminum alloys are recently used in not only marine system but also automotive area because of a low density material, good mechanical properties and better resistance to corrosion. However, Aluminum alloys are less resistant than the purest aluminum such as 1xxx aluminum alloy. Electrochemical anodization technique has attracted in the area of surface treatment because of a simple procedure, a low-cost efficiency than other techniques such as lithography and a large volume of productivity, and so on. Here, The relationship between the corrosion behavior and the thickness of aluminum anodic oxide have been studied. Prior to anodization, The 5052 aluminum sheets ($30{\times}20{\times}1mm$) were degreased by ultra-sonication in acetone and ethanol for 10 minutes and eletropolished in a mixture of perchloric acid and ethanol (1:4, volume ratio) under an applied potential of 20V for 60 seconds to obtain a regular surface. During anodization process, Aluminum alloy was used as a working electrode and a platinum was used as a counter electrode. The two electrodes were separated at a distance of 5cm. The applied voltage of anodization is conducted at 40V in a 0.3M oxalic acid solution at $0^{\circ}C$ with appropriate magnetic stirring. The surface morphology and the thickness of AAO films was observed with a Scanning Electron Microscopy (SEM). The corrosion behavior of all samples was evaluated by an open-circuit potential and potentio-dynamic polarization test in 3.5wt% NaCl solution. Thus, The corrosion resistance of 5052 aluminum alloy is improved by the formation of an anodized oxide film as function of increase anodization time which artificially develops on the metal surface. The detailed electrochemical behavior of aluminum 5052 alloy will be discussed in view of the surface structures modified by anodization conditions such as applied voltages, concentration of electrolyte, and temperature of electrolyte.

• 한국항공우주학회지
• /
• 제43권3호
• /
• pp.257-264
• /
• 2015

쎄트렉아이에서 개발 한 SpaceEye-1 위성의 구조체는 가혹한 발사 및 궤도 환경에서 다양한 지구 관측 임무를 수행하도록 설계하였다. 본 논문은 SpaceEye-1 위성 개발과정 동안 수행한 구조설계와 해석의 방법론에 대해서 기술하였다. 위성 구조체는 발사환경 하에서 정/동적 하중을 견딜 수 있게 설계하였을 뿐 만 아니라 주 탑재체와 부분체를 보호하도록 설계하였다. 구조 설계 요구사항은 개발 초기부터 발사체, 탑재체와 부분체의 요구사항으로 부터 도출되었다. 3차원 설계는 구조체의 기하학적 적합성을 확인하기 위해 이용되었고, 유한요소해석은 구조체가 발사체와 탑재체로부터 도출 된 기계적인 요구사항을 만족하는지 확인 하는데 적용하였다.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제45권2호
• /
• pp.191-204
• /
• 2006

Computer technology has a potential to change the contents of school mathematics and the way of teaching mathematics. But in our country, the problem whether computer technology should be introduced into mathematics classroom or not was not resolved yet. As a tool, computer technology can be used by teachers who are confident of the effectiveness and who can use it skillfully and can help students to understand mathematics. The purpose of this study was to investigate the effective way to introduce and utilize computer technology based on the status quo of mathematics classroom setting. One possible way to utilize computer technology in mathematics classroom in spite of the lack of computer and the inaccessibility of useful software is using domain specific simulation software like 'Polyhedron'. 'Polyhedron', as we can guess from the name, can be used to explore regular and semi regular polyhedra and the relationship between them. Its functions are limited but it can visualize regular polyhedra, transform regular polyhedra into other polyhedra. So it is easier to operate than other dynamic geometry software like GSP. To investigate the effect of using this software in mathematics class, three classes(one in 6th grade from science education institute for the gifted, two in 7th grade) were chosen. Activities focused on the relationship between regular and semi regular polyhedra. After the class, several conclusions were drawn from the observation. First, 'Polyhedron' can be used effectively to explore the relationship between regular and semi regular polyhedra. Second, 'Polyhedron' can motivate students. Third, Students can understand the duality of polyhedra. Fourth, Students can visualize various polyhedra by reasoning. To help teachers in using technology, web sites like NCTM's illuminations and NLVM of Utah university need to be developed.

• 한방재활의학과학회지
• /
• 제23권1호
• /
• pp.15-23
• /
• 2013

Objectives : To evaluate the clinical utility of MET in elector spinae muscle on low back pain patients. Methods : We compared electrical activity between a before MET and a after MET in elector spinae muscle on low back pain patients in same group(n=30) in dynamic flexion-reextension state during five seconds. We analyzed amplitudes and areas of electrical activity and asymmetry index(AI). Results : 1. After MET in elector spinae muscle on low back pain patients were significantly decreased in Visual Analogue Scale(VAS) than before MET in elector spinae muscle on low back pain patients(p<0.05). 2. After MET in elector spinae muscle on low back pain patients were lower electrical activity than before MET in elector spinae muscle on low back pain patients but it is not a pointless observation(p<0.05). 3. AI of the after MET in elector spinae muscle on low back pain patients significantly decreased compared with before MET in elector spinae muscle on low back pain patients(p<0.05). Conclusions : According to above results, there is clinical effect MET on low back pain patients.

• 대한기계학회논문집A
• /
• 제29권10호
• /
• pp.1407-1415
• /
• 2005

Strength change of an over-aged A12024 material was studied after being subjected to stages of severe plastic deformation by ECAP (Equal Channel Angular Pressing). Various kinds of strength value were measured using the conventional tensile test, Rockwell and Vickers hardness and the SP (small punch) test Due to limitation of the specimen size, tension test in transverse direction could not be conducted. Hence, SP test was employed for assessing the strength in transverse direction. Based on TEM observation the measured strength characteristics were explained based on the relation between microstructure, dislocation and strength. As the number of ECAP pass increases, the strength of A12024 was also increased. However, considerable change of strength, which is generally predicted, was not observed in this study. For the strength in transverse direction even decrease of the strength was observed after 6 passes of ECAP. It was argued that this decrease was due to dynamic recovery of dislocation density during or after ECAP processes at $150^{\circ}C$. The strength assessment equation proposed by the authors in the previous paper was shown to be very accurate. This argument was supported by comparing the results of conventional tensile test with those of SP test. It was also pointed that the Rockwell har(3ness value seemed to be able to represent the strength in the transverse direction.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.186-186
• /
• 2013

Nitrogen doped Ge-Sb-Te (N-GST) thin films for phase change random access memory (PRAM) applications were investigated by synchrotron-radiation-based x-ray photoelectron spectroscopy and absorption spectroscopy. Nitrogen doping in GST resulted in more favorable N atoms' bonding with Ge atoms rather than with Sb and Te atoms [1,2], which explains the higher phase change transition temperature than that of undoped Ge-Sb-Te thin film. Surprisingly, it was noticed that N atoms also existed in the form of molecular nitrogen, $N_2$, which is detrimental to the stability of the GST performance [3]. N-doped GST experimental features were also supported by ab-initio molecular dynamic calculations [2]. References [1] M.-C. Jung, Y. M. Lee, H.-D. Kim, M. G. Kim, and H. J. Shin, K. H. Kim, S. A. Song, H. S. Jeong, C. H. Ko, and M. Han, "Ge nitride formation in N-doped amorphous Ge2Sb2Te5", Appl. Phys. Lett. 91, 083514 (2007). [2] Zhimei Sun, Jian Zhou, Hyun-Joon Shin, Andreas Blomqvist, and Rajeev Ahuja, "Stable nitride complex and molecular nitrogen in N doped amorphous Ge2Sb2Te5", Appl. Phys. Lett. 93, 241908 (2008). [3] Kihong Kim, Ju-Chul Park, Jae-Gwan Chung, and Se Ahn Song, Min-Cherl Jung, Young Mi Lee, Hyun-Joon Shin, Bongjin Kuh, Yongho Ha, Jin-Seo Noh, "Observation of molecular nitrogen in N-doped Ge2Sb2Te5", Appl. Phys. Lett. 89, 243520 (2006).

• 한국수자원학회논문집
• /
• 제42권11호
• /
• pp.897-909
• /
• 2009

본 연구에서는 지리정보체계(GIS)의 격자 기반 GIUH 모형을 이용하여 배수경로의 이질성에 따른 지표면 유동과 하천망 유동의 상대적 기여도를 정량적으로 평가하였다. 대상유역은 국제수문개발계획(IHP)의 평창강, 보청천 및 위천 유역의 17개 소유역을 선정하였다. 각 대상유역에 대해 지표면과 하천의 배수경로길이에 대한 평균과 분산을 추정-분석하였다. 또한 관측 수문사상과 결합하여 GIUH 모형의 동적매개변수인 특성 유속을 지표면과 하천에 대해 산정하였다. 산정된 경로길이와 특성유속을 통해 유하시간의 분포, 즉 순간단위도의 평균 및 분산을 추정하여 배수경로의 이질성에 따른 각각의 기여도를 평가 하였다. 연구 결과 순간단위도의 형상을 결정하는 분산의 영향은 중소규모 유역(500 $km^2$이내)에서 지표면의 영향이 지배적이었다. 따라서 소규모 유역에서 GIUH 적용 시 지표면의 유동을 중요하게 고려해야 할 것이다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2018년도 춘계학술발표회
• /
• pp.93-93
• /
• 2018

This study disclosed the aqueous fruits extract of Rubus coreanus as a sustainable agent for the synthesis of Rubus coreanus zinc oxide nanoparticle (Rc-ZnO Nps) using as a reducing and capping precursor for co-precipitation method. The development of Rc-ZnO was assured by white precipitated powder and analyzed by spectroscopic and analytical instruments. The UV-visible (UV-Vis) studies indicate the maximum absorbance at 357nm which confirmed the formation of ZnO Nps and the purity, functional group and monodispersity were assured by field emission transmission electron microscopy (FE-TEM), Fourier Transform Infrared (FTIR) Spectroscopy and dynamic light scattering (DLS). The X-ray powder diffraction (XRD) data revealed the Nps is 23.16 nm in size, crystalline in nature and possess hexagonal wurtzite structure. The Rc-ZnO Nps were subjected for catalytic studies. The Malachite Green dye was degraded by Rc- ZnO NPs in both dark and light (100 W tungsten) conditions and it degraded about 90% at 4 hours observation in both cases. The biodegradable, low cost Rc-ZnO NPs can be a better weapon for waste water treatment.

• 한국환경과학회지
• /
• 제19권1호
• /
• pp.115-124
• /
• 2010

Urban watershed can be found in the visible changes in technology, the most realistic satellite images is to use the data. Satellite image data on the indicators for progress on the nature of the change of land use is consistent and repetitive information, regular observation makes possible the detailed analysis of space-time. These remote sensing techniques and the type of course and, by using the time series history, the past, the dynamic model and the randomized prediction methodology for the conversion process if the city and river basin cooperation of the space changes effectively will be able to extrapolate. For each of the main changes in river flow, depending on the area of urbanization as determined according to reproduce the duration of the relationship between the urbanization of the area and runoff can be represented as a linear polynomial expression was, if a linear expression in the two fast slew rate of 0.858 to 0.861 showed up, and fast slew rate of 0.934 to 0.974 for the polynomial are reported. Change of land use changes in the watershed of the flow is one of the most affecting elements. Therefore, changes in land use of the correct classification of rivers is a more accurate calculation of the amount of the floodgate. In particular, using the Landsat images through the image of the land use category, land use past data and calculated using the Markov Chain model and predict the future land use plan in the water control project will be used for large likely.