• Economic and Environmental Geology
• /
• v.26 no.1
• /
• pp.97-106
• /
• 1993

In order to provide informations for the earth's deep interior and the earthquake mechanism, we have been operating the three components of Streckeisen Seismometers at Pohang Observatory, Korea, as a part of a long period seismic network (POSEIDON) in the northwestern Pacific now under construction. The recording system is specially designed to be able to obtain outputs of broad band and wide dynamic range; BRB (Broad Band), LP (Long Period), and VLP (Very Long Period) output. The triggered BRB and LP signals are digitized with the sampling intervals of 0.1 and 0.4 second, respectively. The lowpass filtered VLP output is digitized and recorded contineously with the sampling interval of 10 seconds. About 120 regional and teleseismic events have been successfully recorded for one and half year since late March, 1991. As a preliminary study, eight events of them are analyzed to determine Rayleigh wave dispersion curves in the period range of 20 to 300 seconds for the continental and oceanic paths. The curves are compared with the typical continental and oceanic ones to discuss the earth's deep interior.

• Atmosphere
• /
• v.25 no.4
• /
• pp.611-622
• /
• 2015

Heavy rainfall ($>30mm\;hr^{-1}$) over the Korean Peninsula is examined in order to understand thermo-dynamic characteristics of the atmosphere, using radiosonde observational data from seven upper-air observation stations during the last 17 years (1997~2013). A total of 82 heavy rainfall cases during the summer season (June-August) were selected for this study. The average values of thermo-dynamic indices of heavy rainfall events are Total Precipitable Water (TPW) = 60 mm, Convective Available Potential Energy (CAPE) = $850J\;kg^{-1}$, Convective Inhibition (CIN) = $15J\;kg^{-1}$, Storm Relative Helicity (SRH) = $160m^2s^{-2}$, and 0~3 km bulk wind shear = $5s^{-1}$. About 34% of the cases were associated with a Changma front; this pattern is more significant than other synoptic pressure patterns such as troughs (22%), migratory cyclones (15%), edges of high-pressure (12%), typhoons (11%), and low-pressure originating from Changma fronts (6%). The spatial distribution of thermo-dynamic conditions (CAPE and SRH) is similar to the range of thunderstorms over the United States, but extreme conditions (supercell thunderstorms and tornadoes) did not appear in the Korean Peninsula. Synoptic conditions, vertical buoyancy (CAPE, CIN), and wind parameters (SRH, shear) are shown to discriminate among the environments of the three types. The first type occurred with high CAPE and low wind shear by the edge of the high pressure pattern, but Second type is related to Changma front and typhoon, exhibiting low CAPE and high wind shear. The last type exhibited characteristics intermediate between the first and second types, such as moderate CAPE and wind shear near the migratory cyclone and trough.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2499-2504
• /
• 2013

Applications of dynamic position control are especially focused on cancellation of unknown disturbance against nonlinear dynamic plants. Control performance is technically dependent upon observation methodology of such disturbance signals. This paper presents a novel control strategy by using linear actuators based on CAN communication networks. Disturbance is measured from placing a ball on a flat plant and image processing technique is applied to observe dynamic position of a ball system. We devise a neural network based PI control system to realize robust control of the dynamic system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.583-591
• /
• 2011

Accurate observation results of dynamic displacements are essential to the protection of civil structures. In this study, we evaluated the optimal methods of the RTK/GPS Accelerometer integration through comparison and analysis of several experiments results. Two methods will be used to calculate the dynamic displacements from the results of the acceleration data as well as two integration methods for measuring the dynamic, static, and quasi-static displacements by incorporating the displacement results from the RTK-GPS and Accelerometer. By using a Cantilever Beam and LVDT measurement, we were able to ensure that the different displacement comparisons would be reliable and accurate. As a results from experiments, the accelerometer processing method applied by use of accelerometers data was filtering with the double integral using FIR band-pass filter which is most optimal for assessing the dynamic displacements. Also, the integrated method using extracting substitution displacements is suitable for measuring synthetically the dynamic static and quasi-static displacements of civil structures with RTK-GPS and accelerometer.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5979-5986
• /
• 2013

This study carried out a geometrical nonlinear dynamic analysis of laminated composite shell structures. Based on the first-order shear deformation shell theory and nonlinear formulation of Sanders, the Newmark method and Newton-Raphson iteration are used for dynamic solution considering nonlinear effects. The effects of radius, fiber angles, and layup sequences on the nonlinear dynamic response for various parameters are studied using a nonlinear dynamic finite element program developed for this study. The several numerical results were in good agreement with those reported by other investigators for square composite plates, and the new results reported in this paper show the significant interactions between the radius, fiber angles and layup sequence in the laminate. Key observation points are discussed and a brief design guideline of laminated composite shells is given.

• Journal of the Korean Data and Information Science Society
• /
• v.10 no.2
• /
• pp.457-464
• /
• 1999

In this paper, we propose an overlapped mosaic plot which proposed by Hartigan and Kleiner(1981) represents the counts in $2{\times}2$ contingency table directly by tiles whose area is proportional to the cell frequency. Overlapped mosaic plot provides some measurements of association including dynamic graphics for mosaic plots. Dynamic graphics for mosaic plots give some useful informations when one gets some measurements of association and selects a model, and current statistical software does not provide this feature. We can see the deviations between observation and estimate of independence from overlapped mosaic plot. This dynamic graphics give some useful informations how far this data are apart from independence.

• Journal of Astronomy and Space Sciences
• /
• v.28 no.4
• /
• pp.273-284
• /
• 2011

A method of stellar source selection for validating the quality of image is investigated for a low Earth orbit optical remote sensing satellite. Image performance of the optical payload needs to be validated after its launch into orbit. The stellar sources are ideal source points that can be used to validate the quality of optical images. For the image validation, stellar sources should be the brightest as possible in the charge-coupled device dynamic range. The time delayed and integration technique, which is used to observe the ground, is also performed to observe the selected stars. The relations between the incident radiance at aperture and V magnitude of a star are established using Gunn & Stryker's star catalogue of spectrum. Applying this result, an appropriate image performance index is determined, and suitable stars and areas of the sky scene are selected for the optical payload on a remote sensing satellite to observe. The result of this research can be utilized to validate the quality of optical payload of a satellite in orbit.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.231-236
• /
• 1999

Accurate ocean surface fluxes with high resolution are critical for understanding a mechanism of global climate. However, it is difficult to derive those fluxes by using ocean observation data because the number of ocean observation data is extremely small and the distribution is inhomogeneous. On the other hand. satellite data are characterized by the high density, the high resolution and the homogeneity. Therefore, it can be considered that we obtain accurate ocean surface by using satellite data. Recently we constructed ocean surface data sets mainly using satellite data. The data set is named by Japanese Ocean Flux data sets with Use of Remote sensing Observations (J-OFURO). Here, we introduce J-OFURO. The data set includes shortwave radiation, longwave radiation, latent heat flux, sensible heat flux, and momentum flux etc. Moreover, sea surface dynamic topography data are included in the data set. Radiation data sets covers western Pacific and eastern Indian Ocean because we use a Japanese geostationally satellite (GMS) to estimate radiation fluxes. On the other hand, turbulent heat fluxes are globally estimated. The constructed data sets are used and shows the effectiveness for many scientific studies.

• 한국해양학회지
• /
• v.6 no.2
• /
• pp.99-103
• /
• 1971

GEK observation had been done in Satsunan sea region (south western region of Kyushu, Japan), mixing sea region of Kuroshio, its count-current and water mass of Eastern China Sea in August 1968. The results are al follows: 1. Observed values by GEK are coincided well with that of ship's drift in the surface water of Kuroshio region. 2. Compared the observed values by GEK with that of dynamic calculation of 800 db, in the eastern area of the surveyed region occupied by Kuroshio water mass, they are coincided well. But not in the western area which is of mixing zone of the Eastern China Sea water mass, Kuroshio and its count-current, showing over 1 knot differences with calculated value are bigger than that of GEK observation.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.1
• /
• pp.34-42
• /
• 2015

The development of an azimuth thruster which has the function of dynamic positioning and propulsion has been greatly required as the demand of vehicles with it increases. To develop or design a reliable azimuth thruster, it is appropriate that the performance and cavitation observation tests should be conducted in the regime of high Reynolds number. In the present study, to satisfy high Reynolds number condition new dynamometer for a large azimuth thruster is manufactured and arranged in the test section of the Large Cavitation Tunnel (LCT). The test method composed of the open water and the cavitation observation tests is established successfully in LCT, considering the thruster design.