• 대한치과의사협회지
• /
• 제51권5호
• /
• pp.255-264
• /
• 2013

Many concept of occlusion have been introduced in the past, but there isn't any generally accepted unified theory since a single occlusion theory cannot represent the natural perfection, especially considering the difference in clinical experience, the dynamic occlusion, and individual diversity in mastication pattern. NAT(Naturgemasse Aufwachstechnik)/NFR((Natur Funktionsgerechte Rekonstruktion) occlusion is not just a theory on occlusion, but a clinical occlusion that can be practically applied to clinical practice by providing dynamic occlusion adjusted to the individual mastication pattern and biomechanics. This report aims to provide a guide to a clinically biomechanical occlusion through the teamwork of both the dentist and the lab technician by introducing the NAT occlusion through following: reviewing the concept of occlusion in terms of morphology, its correlation with NAT/NFR occlusion, reviewing the limitation of conventional occlusion theories, and introducing the clinical application of NAT/NFR.

• 한국전자통신학회논문지
• /
• 제10권10호
• /
• pp.1131-1138
• /
• 2015

인터넷의 규모가 급성장하면서 IPv4 주소는 고갈되었고 IPv6로의 전이는 지연되고 있다. 차선책으로 IPv4 주소공간의 낭비를 줄이기 위하여 공중망과 사설망을 연결하는 네트워크 주소변환(NAT : Network Address Translation) 방안이 사용되고 있다. 본 논문에서는 주소공간을 효율적으로 사용할 수 있는 동적 NAT과 PAT 기반의 네트워크 설계를 기존의 이론중심에서 탈피하기 위해 토폴로지 설계 후 패킷 트레이서를 이용하여 공통 가상 망을 구현하고 시뮬레이션을 통해 결과의 검증이 가능한 효과적인 구현사례를 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.155-157
• /
• 1998

The Moving Coil type Linear Oscillatory Actuator(MC-LOA) is widely used in system needed reciprocation of short stroke. MC-LOA is suitable for high speed operation and correctness stroke control. This paper designed a MC-LOA to combine mechanical dynamic equation with electric dynamic equation. Electric dynamic equation was obtained from equivalent circuit and the parameters were obtained using Finite Element Method (FEM). Then, we analyzed the dynamic and steady state characteristics of the designed MC-LOA.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.45.4-45
• /
• 2002

In EIT, an array of disjoint electrodes is attached on the boundary of the object and a set of small alternating electrical currents is injected into the object through these electrodes, and then the corresponding set of voltages is measured on the same array of the electrodes. The objective in EIT is to estimate the resistivity distribution inside the object based on the set of measured voltages and injected currents. In this paper, we proposed a new dynamic EIT reconstruction scheme based on the interacting multiple model (IMM) algorithm. The main contribution of the proposed scheme is that multiple models are employed for the state evolution to get around the modeling uncertainty. Extensi...

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.55-57
• /
• 1999

To control induction motor we have to know about dynamic characteristics including torque characteristic. Simulation and test were made to get dynamic characteristics using LabVIEW and Matlab. We got experimental results(e.g current, torque, speed etc) from starting to steady state with changing of load.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.50-52
• /
• 1995

This paper deals with the dynamic characteristics of LIM which is controlled by constant V/f ratio and the characteristics of the Inverter acted as interface between the utility power system and LIM. Though open-loop control method is less reliable than closed-loop control method, it's commonly used because it is simple and cheap. This paper shows the consideration for dynamic characteristics of LIM under open-loop control and for Inverter.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.47.5-47
• /
• 2002

Some integration methods for the linear subsystems are examined and which algorithm is optimal for real-time simulation is considered. First, a number of typical integration methods for a linear time-invariant system are given. Then, the dynamic errors are shown both from the point of view of characteristic root errors and transfer function errors. After that we compute the dynamic errors of integration and choose the appropriate method for each system.

• 한국기계가공학회지
• /
• 제21권7호
• /
• pp.21-27
• /
• 2022

This study was conducted to evaluate the structural stability of a CNC automatic lathe structure and avoid resonance. The analysis conditions were analyzed by applying the weight of the upper assembly. From the structural analysis, the stress and deformation were low, and the safety factor was high. From the dynamic characteristic analysis, it was determined that resonance does not occur because the natural frequency is outside the driving range. The error between the dynamic characteristic analysis and vibration test results is very low; thus, the reliability of the analysis results can be secured.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제10권2호
• /
• pp.128-133
• /
• 2010

This paper presents a method for estimating the parameters of dynamic models for induction motor dominating loads. Using particle swarm optimization, the method finds the adequate set of parameters that best fit the sampling data from the measurement for a period of time, minimizing the error of the outputs, active and reactive power demands and satisfying the steady-state error criterion.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.47-49
• /
• 2007

This paper deals with the generating characteristic analysis of permanent magnet (PM) machines with multi-pole rotor and 3-phase stator windings considering losses such as copper loss, iron loss and mechanical loss. First, using d-q transformation, dynamic equations of PM machines are established. And then, characteristic equations for losses, power and efficiency are also derived. On the basis of d-q dynamic equations and characteristic equations, dynamic simulation algorithm is achieved by the MATLAB/SIMULINK. The simulation results are validated extensively by finite element (FE) analyses.