• The Journal of the Korean dental association
• /
• v.51 no.5
• /
• pp.255-264
• /
• 2013

Many concept of occlusion have been introduced in the past, but there isn't any generally accepted unified theory since a single occlusion theory cannot represent the natural perfection, especially considering the difference in clinical experience, the dynamic occlusion, and individual diversity in mastication pattern. NAT(Naturgemasse Aufwachstechnik)/NFR((Natur Funktionsgerechte Rekonstruktion) occlusion is not just a theory on occlusion, but a clinical occlusion that can be practically applied to clinical practice by providing dynamic occlusion adjusted to the individual mastication pattern and biomechanics. This report aims to provide a guide to a clinically biomechanical occlusion through the teamwork of both the dentist and the lab technician by introducing the NAT occlusion through following: reviewing the concept of occlusion in terms of morphology, its correlation with NAT/NFR occlusion, reviewing the limitation of conventional occlusion theories, and introducing the clinical application of NAT/NFR.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.10
• /
• pp.1131-1138
• /
• 2015

As the size of the internet market grows rapidly, the number of IPv4 addresses available is being exhausted, while transition to IPv6 is being delayed. As the best alternative solution, Network Address Translation(NAT) scheme is being used. It connects the public internet network with the private internet network in order to reduce the waste of IPv4 addresses space. The purpose of this paper is to study the effective example of network based on common virtual network using Packet Tracer with topology designed rather than usual theoretical approach in Dynamic NAT and PAT, which allows more efficient use of address space.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.155-157
• /
• 1998

The Moving Coil type Linear Oscillatory Actuator(MC-LOA) is widely used in system needed reciprocation of short stroke. MC-LOA is suitable for high speed operation and correctness stroke control. This paper designed a MC-LOA to combine mechanical dynamic equation with electric dynamic equation. Electric dynamic equation was obtained from equivalent circuit and the parameters were obtained using Finite Element Method (FEM). Then, we analyzed the dynamic and steady state characteristics of the designed MC-LOA.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.45.4-45
• /
• 2002

In EIT, an array of disjoint electrodes is attached on the boundary of the object and a set of small alternating electrical currents is injected into the object through these electrodes, and then the corresponding set of voltages is measured on the same array of the electrodes. The objective in EIT is to estimate the resistivity distribution inside the object based on the set of measured voltages and injected currents. In this paper, we proposed a new dynamic EIT reconstruction scheme based on the interacting multiple model (IMM) algorithm. The main contribution of the proposed scheme is that multiple models are employed for the state evolution to get around the modeling uncertainty. Extensi...

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.55-57
• /
• 1999

To control induction motor we have to know about dynamic characteristics including torque characteristic. Simulation and test were made to get dynamic characteristics using LabVIEW and Matlab. We got experimental results(e.g current, torque, speed etc) from starting to steady state with changing of load.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.50-52
• /
• 1995

This paper deals with the dynamic characteristics of LIM which is controlled by constant V/f ratio and the characteristics of the Inverter acted as interface between the utility power system and LIM. Though open-loop control method is less reliable than closed-loop control method, it's commonly used because it is simple and cheap. This paper shows the consideration for dynamic characteristics of LIM under open-loop control and for Inverter.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.47.5-47
• /
• 2002

Some integration methods for the linear subsystems are examined and which algorithm is optimal for real-time simulation is considered. First, a number of typical integration methods for a linear time-invariant system are given. Then, the dynamic errors are shown both from the point of view of characteristic root errors and transfer function errors. After that we compute the dynamic errors of integration and choose the appropriate method for each system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.7
• /
• pp.21-27
• /
• 2022

This study was conducted to evaluate the structural stability of a CNC automatic lathe structure and avoid resonance. The analysis conditions were analyzed by applying the weight of the upper assembly. From the structural analysis, the stress and deformation were low, and the safety factor was high. From the dynamic characteristic analysis, it was determined that resonance does not occur because the natural frequency is outside the driving range. The error between the dynamic characteristic analysis and vibration test results is very low; thus, the reliability of the analysis results can be secured.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.10 no.2
• /
• pp.128-133
• /
• 2010

This paper presents a method for estimating the parameters of dynamic models for induction motor dominating loads. Using particle swarm optimization, the method finds the adequate set of parameters that best fit the sampling data from the measurement for a period of time, minimizing the error of the outputs, active and reactive power demands and satisfying the steady-state error criterion.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.47-49
• /
• 2007

This paper deals with the generating characteristic analysis of permanent magnet (PM) machines with multi-pole rotor and 3-phase stator windings considering losses such as copper loss, iron loss and mechanical loss. First, using d-q transformation, dynamic equations of PM machines are established. And then, characteristic equations for losses, power and efficiency are also derived. On the basis of d-q dynamic equations and characteristic equations, dynamic simulation algorithm is achieved by the MATLAB/SIMULINK. The simulation results are validated extensively by finite element (FE) analyses.