• 소음진동
• /
• 제9권6호
• /
• pp.1259-1266
• /
• 1999

본 연구의 목적은 유연성 궤도 모델을 개발하여 고기동성 궤도차량의 다물체 동역학 해석에 응용하는 것이다. 유연성 궤도 모델을 개발하는데는 대체로 두 가지 어려운 문제가 따른다. 첫째로, 해의 안정성을 유지하기 위해 적분구간이 충분히 작아야 한다는 것이다. 즉, 궤도 링크 사이의 유연성 조인트 모델과 충격적인 접촉력에 따른 고진동 입력을 처리해야 한다. 둘째로, 3차원 다물체 궤도차량 모델에 대한 수 많은 운동 방정식을 풀어야 한다는 것이다. 따라서 궤도차량을 샤시와 궤도 부시스템으로 나누고 회귀적인 방법을 사용하여 운동방정식의 수를 최소화하였다. 본 연구에서 개발된 방법을 검증하기 위하여 차량의 가속, 고속주행, 제동, 선회 등의 시뮬레이션을 수행하였다.

• 대한교통학회지
• /
• 제20권3호
• /
• pp.129-147
• /
• 2002

본 연구에서 변동등식에 근거한 동적경로선택조건을 도출하여 동적통행배정모형을 제안한다. 동적경로선택조건은 운전자에 의해 이용된 경로, 링크 그리고 출발지의 출발시간을 고려하여 도출되며 이 조건을 동적통행배정모형으로 전환하는 과정에서 모형의 변동등식문제로 압축된다. 등식이론에 근거한 모델의 이론적 배경을 입증하기 위해 제안된 동적통행배정모형이 필요충분조건을 만족함이 증명되었다. 해법으로서 기존의 제안된 네트워크의 시간과 공간확장기법을 채택하지 않고 물리적 네트워크가 직접 알고리즘에 반영되도록 하기 위해 각 링크의 시간대별 통행량과 방출통행량을 링크진입통행으로 표현하여 시간종속 통행시간함수를 단일변수로 처리하여 대각화알고리즘에 반영하였다. 소규모 비대칭 네트워크 적용결과 사용자 동적최적경로선택조건이 만족됨을 입증하였는데 단위시간간격이 적을수록 개선된 효과를 보여준다. I-394네트워크 실험결과로서 기존의 변동부등식에 근거한 알고리즘에 비해 제안된 알고리즘이 최소한 93%이상의 컴퓨터연산 속도의 개선효과를 가져왔다. 등식이론에 근거한 모델개발의 장점으로서는 제안된 모델의 최적해의 계산시간이 전체시간의 증가에 전혀 영향을 받지 않는다는 것으로 이는 동적통행배정모형에 적용될 네트워크의 규모가 커질수록 제안된 알고리즘의 계산 효율성은 더욱 증가하는 것을 의미한다. 따라서 제안된 동적통행배정모형은 대규모 시간종속적 교통망에서 교통상황의 변화에 민감하게 반응할 수 있는 실시간첨단교통제어의 핵심기능으로서 역할수행이 기대된다.

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.145-156
• /
• 2012

These days, the application of electronic power transformers (EPTs) is expanding in place of ordinary power transformers. These transformers can transmit power via three or four wire converters. Their dynamic performance is extremely important, due to their complex structure. In this paper, a new method is proposed for improving the dynamic performance of distribution electronic power transformers (DEPT) by using sliding mode control (SMC). Hence, to express the dynamic characteristics of a system, different factors such as the voltage unbalance, voltage sag, voltage harmonics and voltage flicker in the system primary side are considered. The four controlling aims of the improvement in dynamic performance include: 1) maintaining the input currents so that they are in sinusoidal form and in phase with the input voltages so they have a unity power factor, 2) keeping the dc-link voltage within the reference amount, 3) keeping the output voltages at a fixed amount and 4) keeping the output voltages in sinusoidal and symmetrical forms. Simulation results indicate the potential and capability of the proposed method in improving DEPT behavior.

• 인터넷정보학회논문지
• /
• 제16권6호
• /
• pp.47-55
• /
• 2015

기존 동적 라우팅은 최소 링크 비용을 기준으로 최적의 라우팅 경로를 설정하고 이에 따라 유입 혹은 유출 되는 플로우를 단말로 전송한다. 하지만 이 경우에는 보안 기능을 담당하는 미들 박스를 우회하게 되고 이에 따라 해당 네트워크는 보안 위협을 직면하게 되는 문제가 발생한다. 따라서 최적의 라우팅 경로 설정 시 각 플로우의 서비스 유형을 고려하여 해당 플로우를 보안 미들 박스를 거쳐 단말로 전송하기 위한 라우팅 방안인 동적 서비스 체이닝이 필요하다. 본 논문에서는 SDN의 동적 플로우 트래픽 제어 기능과 보안 서비스 기능을 동시에 고려한 동적 라우팅 방안에 대해 제안한다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권6호
• /
• pp.445-453
• /
• 2016

Fixed robust routing is attracting attention as routing that achieves high robustness against changes in traffic patterns without conducting traffic measurement and performing dynamic route changes. Fixed robust routing minimizes the worst-case maximum link load by distributing traffic of every source-destination (s-d) router pair onto multiple candidate paths (multipath routing). Multipath routing, however, can result in performance degradation of Transmission Control Protocol (TCP) because of frequent out-of-order packet arrivals. In this paper, we first investigate the influence of multipath routing on TCP performance under fixed robust routing with a simulation using ns-2. The simulation results clarify that TCP throughput greatly degrades with multipath routing. We next propose a candidate path selection method to improve TCP throughput while suppressing the worst-case maximum link load to less than the allowed level under fixed robust routing. The method selects a single candidate path for each of a predetermined ratio of s-d router pairs in order to avoid TCP performance degradation, and it selects multiple candidate paths for each of the other router pairs in order to suppress the worst-case maximum link load. Numerical examples show that, provided the worst-case maximum link load is less than 1.0, our proposed method achieves about six times the TCP throughput as the original fixed robust routing.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.811-814
• /
• 1997

In this paper, the torque optimization of a kinematically redundant manipulator for minimizing the torque demands is discussed. The minimum torque solution based on a local optimization has been known to encounter the instability problem and then the global torque optimization was suggested as one of the alternatives. Herein, by adopting the infinity-norm rather than the 2-norm for the magnitude of torques, we are to propose a new cost function more advantageous to the avoidance of torque limits. By the way, a solution to the global torque optimization formulated with the new cost function can not be obtained by the previous methods due to their difficulties such as inability to treat discontinuous cost functions and various constraints on the joint variables. Thus, to overcome those deficiencies, we are developing a new approach using the dynamic programming. The effectiveness of the proposed method is shown through simulation examples for a 3-link planar redundant manipulator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 학술대회 논문집 전문대학교육위원
• /
• pp.108-111
• /
• 2007

A novel voltage sag compensator with hi-directional DC/DC converter of Electric double layer capacitor is proposed. Recently, the double-layer capacitor which is drawn attention as a new energy storage element has a lot of advantage such as no maintenance, long lifetime and quick charge/discharge characteristics with large current. This DC/DC converter is used to control the charging current to the double-layer capacitor and also used to keep the DC link voltage constant for discharge of the double-layer capacitor. Therefore, the proposed DC/DC converter has the high-efficiency controller, dynamic compensator of voltage sag is driven by this converter. Finally, experimental results show the validity of the control scheme and the ability of the dynamic voltage compensator.

• 대한교통학회지
• /
• 제13권4호
• /
• pp.5-29
• /
• 1995

Advanced Traveler Inoformation Systems*ATIS) , as a subsystem of ITS influence the travel choices of dreivers by providing them with historical, real-time and predictive information to supprot travel decisions and consequently improves the speed and quality of travel. For thesuccessul accomplishment of ATIS, the time-dependent variations of traffic in a road network and travel times of vehicles during their journey must be predicted . The purpose of this study is to evaluate the past developments in the dynamic route choice models and to apply the instantaneous dynamic user optimal route choice model. recently formulated with flow propagation constraints by Ran, Boyce and LeBlanc, to the real transportation network of Seocho-Ku in Seoul. As input data for this application, the time-dependent travel rates are estimated and the link travel time function is derived. The modelis validated from three view points : the efficiency of model itself the ability to predict traffic volume and travel time on links, and the optimal traffic control.

• Structural Engineering and Mechanics
• /
• 제23권6호
• /
• pp.691-711
• /
• 2006

This paper uses the finite element method to simultaneously consider the coupled cable-deck vibrations and the parametric vibrations of stay cables in dynamic analysis of a cable-stayed bridge. The stay cables are represented by some cable finite elements, which can consider the parametric vibration of the cables. In addition to modeling stay cables using multiple link cable elements, a procedure for removing the self-weight term of cable element is proposed. A eigenvalue analysis process using dynamic condensation method for sorting out the natural modes of the girder-tower vibrations and the Rayleigh damping considering element damping for damping matrix are also proposed for dynamic analyses of cable-stayed bridges. The possibilities of using cable elements and of using global and local vibrations to evaluate the parametric vibrations of stay cables in a cable-stayed bridge are confirmed, respectively.

• Journal of Communications and Networks
• /
• 제7권4호
• /
• pp.499-508
• /
• 2005

In this paper, we address the problem of efficient routing and wavelength assignment (RWA) in multi-fiber wavelength division multiplexing (WDM) networks without wavelength translation, under dynamic traffic. We couple Dijkstra's shortest path algorithm with a suitable weight function which chooses optical paths based both on wavelength availability and multi-fiber segments. We compare our approach with other RWA schemes both for regular and irregular WDM multi-fiber network topologies in terms of blocking probability and overall link utilization.