• Korean Journal of Metals and Materials
• /
• v.46 no.9
• /
• pp.563-571
• /
• 2008

The influence of annealing treatment on dynamic deformation behavior of ultra-fine grained aluminum alloys was investigated in this study. After equal-channel angular pressing at $200^{\circ}C$, most of the grains were considerably reduced to nearly equiaxed grains of $0.3{\mu}m$ in size. With an increment of various annealing treatments for 1 hour, resultant microstructures were found to be fairly stable at temperatures up to $200^{\circ}C$, suggesting that static recovery would be dominantly operative, whereas grain growth was pronounced above $250^{\circ}C$. The tensile test results showed that yield and ultimate tensile strengths decreased, but elongation-to-failure and strain hardening rate increased with increasing annealing temperature. The dynamic deformation behavior retrieved with a series of torsional tests was explored with respect to annealed microstructures. Such mechanical response was analyzed in relation to resultant microstructure and fracture mode.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.6
• /
• pp.583-590
• /
• 2016

This paper presents a dynamic crack propagation algorithm with Rayleigh damping effect based on the MLS(Moving Least Squares) Difference Method. Dynamic equilibrium equation and constitutive equation are derived by considering Rayliegh damping and governing equations are discretized by the MLS derivative approximation; the proportional damping, which has not been properly treated in the conventional strong formulations, was implemented in both the equilibrium equation and constitutive equation. Dynamic equilibrium equation including time relevant terms is integrated by the Central Difference Method and the discrete equations are simplified by lagging the velocity one step behind. A geometrical feature of crack is modeled by imposing the traction-free condition onto the nodes placed at crack surfaces and the effect of movement and addition of the nodes at every time step due to crack growth is appropriately reflected on the construction of total system. The robustness of the proposed numerical algorithm was proved by simulating single and multiple crack growth problems and the effect of proportional damping on the dynamic crack propagation analysis was effectively demonstrated.

• Korean System Dynamics Review
• /
• v.15 no.2
• /
• pp.51-74
• /
• 2014

Over the past few years Korea has achieved rapid economic growth, while the deepening polarization of income has negatively affected Korea economy and society. It can be the reason of this negative effect on economy that the increased income by the economic growth has not been distributed socially, but overly focused on one part of social class. One of the important and powerful solution of social polarization could be the strengthening of the income distribution. In these circumstances, the social interest and discussion on the universal welfare system and on the basic income as the means of income redistribution have been increasing. In this study, a system dynamic analysis was conducted to find how an universal cash payment as basic income providing cash benefits impacts on the promotion of consumption in private sector, of local jobs and of local economic organizations. Recently, the poor energy consumption ability of energy poverty became one of the social problems. Also it was analysed how an energy payment-in-kind as basic income influences on the energy consumption of the region, the energy production capacity, the promotion of local energy. The universal cash payment and energy payment-in-kind as the basic income policy showed similar and positive effects on the local economy system and on the local energy system respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.3
• /
• pp.137-143
• /
• 2009

It has been reported that mechanical stimulation takes a role in improving eel/ growth in skeletal system. Various research groups have been showed their own bioreactors which stimulate cell-seed three-dimensional scaffold. In this study, we hypothesized that the various conditions of mechanical stimulation would affect cell growth and proliferation. To prove our hypothesis, we designed a custom-made bioreactor capable of applying controlled compression to cell-encapsulated scaffolds. This device consisted of a circulation system and a compression system. Each parts of the bioreactor was fabricated using the rapid prototyping technology By using the rapid prototyping technology, we can modify and improve the bioreactor very rapidly For dynamic cell-culture, cell-encapsulated agarose gel was fabricated in 2% concentration. We performed dynamic cell-culture using this agarose gel and developed bioreactor in 3 days.

• Journal of Korean Society for Quality Management
• /
• v.33 no.4
• /
• pp.21-41
• /
• 2005

This study analyzes the Internet utilization pattern of customer by comprehensively investigating the previous studies on the behavior pattern of customer in terms of Internet business. Based on the analysis, this study develops research framework that supports strategic decision-making for resource allocation in Internet business. Such research framework would be helpful for providing the typology of Internet business model that can be specialized by each industry. As a result of the simulation analysis, it was found that the optimal resource allocation portfolio providing maximum profits to the Internet bookstore involves large-scale investment on delivery service and customer support service which are the key factors for post-purchase customer satisfaction, regardless of the growth pattern or size of Internet bookstore market. Consequently, from the above analysis, the investment ratio of resources for the profit maximization of Internet bookstore was drawn. Conclusively, based on the comprehensive examination of the results, this study provided a framework for dynamic resource allocation decision-making, and proposed a management strategy which allows consumers to shop under more favorable environment, and simultaneously enables the Internet bookstore to accomplish management objectives such as continuous growth and profit maximization.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.8
• /
• pp.28-34
• /
• 2010

Railway wheel and axle is the most critical components in railway system. A wheel and axle failure can cause a derailment with its attendant loss of life and property. The service conditions of railway vehicles have become severe in recent years due to a general increase in operating speeds. Therefore, more precise evaluate of wheelset strength and safety has been desired. Fracture mechanics characteristics such as dynamic fracture toughness, fatigue threshold and charpy impact energy with respect to the tread, plate, disc hole of wheel and the surface of press fitted axle are evaluated. This paper describes the difference of fracture toughness, fatigue crack growth and fatigue threshold at the locations of wheel and axle. The results show that the dynamic fracture toughness, $K_{ID}$, is obviously lower than static fracture toughness, $K_{IC}$ and the fracture mechanics characteristics are difference to the location of wheel tread and hole.

• Explosives and Blasting
• /
• v.26 no.1
• /
• pp.49-55
• /
• 2008

Mechanical excavation techniques employing tunnel boring machines (TBM) and rock splitters have been proposed to minimize rock damage for tunnel and underground waste repository facilities. Such a mechanical excavation, however, is extremely expensive and not applicable in all cases. For these reasons, controlled blasting using notched charge holes have been suggested to achieve crack growth along specific directions and inhibit growth along other directions. This study introduces a dynamic fracture process analysis code to simulate fracture processes of rock which has a notched charge hole.

• Korean Journal of Organic Agriculture
• /
• v.28 no.2
• /
• pp.171-188
• /
• 2020

The Coronavirus disease (COVID-19), first identified in China in December 2019, has widely spread worldwide and is an ongoing pandemic. It is expected that the ripple effect of COVID-19 on the global economy including the agricultural sector will increase substantially if not properly controlled shortly. This study examines the potential impact of COVID-19 on the Korean beef cattle sector and farm labor demand for Korean beef cattle using a dynamic partial equilibrium model. The agricultural production value and farm labor demand for Korean beef cattle in the scenario assuming pessimistic GDP growth rate (-1.2% in 2020) with no direct supply shocks fell by up to 4.00% and 0.67%, respectively, compared to the baseline which represents the future without COVID-19 outbreak. On the other hand, the agricultural production value and farm labor demand for Korean beef cattle in the scenario assuming both pessimistic GDP growth rate and supply shocks (-12.7% beef imports and + 2.4% feed cost in 2020) increased by up to 12.08% and 1.99%, respectively, compared to the baseline.

• Transactions of Materials Processing
• /
• v.8 no.5
• /
• pp.471-481
• /
• 1999

The properties of deformed products are generally dependent upon the distribution of microstureture. It is, therefore, necessary to make the distribution of microstureture uniform in order to achieve the best balance of properties in the final product. This is often a demanding task, even for conventional materials. It is become essential to achieving mechanical integrity and a desired combination of microstructure and properties. The objective mechanical integrity and a desired combination of microsttucture and properties. The objective of this study is to design the optimal die profile which can yield more uniform microstructure in hot extruded product. The microstructure evolution, such as dynamic and static recrystallization as well as grain growth, is investigated using the program com-bined with yada and Senuma's empirical equations and rigid-thermoviscoplastic finite element method. The die profile of hot extrusion is represented by Bezier-curve to define all available profile. In order to obtain the optimal die profile which yields uniform microstructure in the product the FPS(Flexible Polyhedron Search) method is applied to the present study. To validate the result of present study the experimental hot extrusion is performed and the result is compared with that of simulation.

• The Journal of Fisheries Business Administration
• /
• v.33 no.2
• /
• pp.75-98
• /
• 2002

As a contribution to developing fishery stock assessment, optimum sustainable yield and its international standards such as MSY, MEY, and dynamic MEY for six recommended fisheries are developed using bio-economic models. For selecting the appropriate model, five models - Schaefer, Schnute, Walters and Hilborn, Fox, and CY&P models are tested in effort and catch data of six species. Surprisingly all the models except the CY&P model failed to satisfy statistical standards such as goodness-of-fitness and reliability. Generally, the CY&P model holds good fitness and statistically significant level for all of six fisheries. However, the CY&P model for squid, where the intrinsic growth rate is high, could not explain MSY, MEY, and dynamic MEY appropriately. This study makes a contribution to develop the modified model for the intrinsic growth rate of 1. The reformulated model represents the results reasonably even though the estimated equation has not good fitness. Although most of the CY&P models appear to have good fits and validated results for some cases, these models also seem to be quite sensitive to parameters which means a more stable model should be developed and data should carefully be handled. In particular biological and technical interactions such as multispecies, predator prey relationship, age structure and mortality should be taken into account. In addition, economic factors and fishing efforts such as price, cost, technical change and a reasonable function of fishing input should simultaneously be considered.