• 한국가스학회지
• /
• 제15권5호
• /
• pp.19-24
• /
• 2011

최근 산업구조가 미래 첨단산업 위주로 전환되면서 자동차를 비롯한 항공기, 휴대폰, 전자기기 등 다양한 산업분야의 제품에 Al, Mg, Li, Zn과 같은 가연성 금속의 사용량이 크게 증가하고 있으며 이러한 가연성 금속의 가공과 정에서 발생하는 금속분진에 의한 폭발 사고 또한 증가하고 있다. 금속분진에 의한 폭발사고는 가연성 금속분진을 포집 및 저장하는 국소배기설비의 공기정화장치에서 대부분 발생함에 따라 공기정화장치내 폭발 발생시 폭발압력에 의한 공기정화장치 구조물의 변형과 파열형태를 단순 예측이 아닌 유한요소해석(FEA)법에 의해 기술적으로 분석 및 제시하고자 본 연구를 수행하였다.

• 한국태양에너지학회 논문집
• /
• 제25권3호
• /
• pp.37-45
• /
• 2005

Higher requirement of advanced building design code and the development of construction technique have resulted in more thermal and air tight buildings. This has caused the sick building syndrome in a indoor air quality has been relatively getting worse. A new concept with a solar fresh air heating and electrostatic precipitator or called as STCC(Solar Transpired Collector and Cyclone) has been proposed to solve this IAQ issue. This paper describes the assessment study of STCC system under different outdoor airflow rates. The experiment was carried out under real condition with 30CMM STCC system test facility. Incense smoke was used to study the particle concentration decay trends under outdoor airflow rates 0CMM, 10CMM, 20CMM, 30CMM, with applied voltages of 5kV and 15kV for collecting and discharging electrodes of an Electrostatic Precipitator. Result shows that the particle decay increases by increasing the outdoor airflow rates. The collection efficiency, dust cleaning effectiveness(P) and application area calculation result comparisons have also been studied. This factors could be used to estimate how a dust of indoor air quality(IAQ) and removed for a building space with a STCC system.

• 한국재난정보학회 논문집
• /
• 제10권1호
• /
• pp.71-83
• /
• 2014

본 연구에서는 잠재적인 화재 및 폭발 위험성이 있는 밀가루 제조공정에서의 분진 및 기능성 비누제조공정에서의 살리실산분진, 합판 제조공정에서 목분, 폐타이어 처리공정에서 발생하는 분진들을 채집하여 열적특성을 비교하기 위해 실험을 수행하였다. DSC 실험결과 대상시료 모두 활석의 첨가량이 증가할수록 열 유속은 감소하고 온도는 감소상태인 것으로 분석되었다. 이는 분해속도가 줄어드는 것이고, 위험성이 감소하고 있는 것을 나타내는 것이다. 그러나 대상시료 모두 승온속도가 증가 할수록 흡열개시온도가 낮은 온도 부분으로 이동하고 있으며, 흡열량도 크게 증가하였다. 이는 승온속도가 증가할수록 시료의 분해위험성이 증가하는 것으로 분석되었다. 아울러TGA 실험결과 대상시료 모두 무게감량의 비율은 활석의 양이 증가할수록 전체 무게감량이 줄어들어 열적 안정성을 확보하는 것으로 나타났다. 향후 분진폭발메커니즘의 지속적 연구와 보완이 효과적인 분진폭발예방 대책수립에 기여할 것으로 기대된다.

• 보건의료산업학회지
• /
• 제6권4호
• /
• pp.191-204
• /
• 2012

The purpose of this study was to provide basic data necessary for improvement by closely examining factors of having influence upon dental technicians' turnover. Questionnaire survey was conducted of 204 dental technicians who work at dental hospitals, clinics and dental laboratory rooms in Daegu area. The following conclusions were obtained. The satisfaction with job was high in job position in more than co-representative, in the whole and other task, and in less than 9 hours as for working hours. In the satisfaction with working environment, dissatisfaction was high in women, in the working career with 7~9 years, in chief level as for the job position in charge, in being responsible for porcelain in case of the duty field, and in more than 10 people as for the number of employees. The higher satisfaction with job satisfaction and working environment led to the lower turnover intention. Turnover intention was low in case of having ventilation fan & dust collector desk and in case of being well ventilated inside the workshop. As the above results, it is considered to be necessary for arranging institutional device of protecting dental technicians' health and reducing turnover through improving working environment such as forming comfortable environment of using the dust-collecting facilities and the ventilation facilities, wearing suitable individual protective gear and arranging the rest space.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2019년도 제60차 하계학술대회논문집 27권2호
• /
• pp.397-400
• /
• 2019

급격히 증가하는 자동차 수, 발전량 증가 등으로 인하여 미세먼지로 인한 환경오염이 심각한 사회문제로 대두되고 있는 실정이다. 50개가 넘는 국가들이 권고치 이상의 미세먼지로 인해 피해를 받고 있으며 각 피해국들은 미세먼지 저감 대책 및 발생을 최소화하기 위한 방안을 연구하고 있다. 하지만 현재 고정형 미세먼지 취득 드론으로는 다양한 포인트의 미세먼지 데이터를 수집하기 힘든 상황이며, 기존 드론을 활용한 방법에서 도 회전 날개의 영향으로 인해 정확한 데이터를 수집하기 힘든 실정이다. 본 논문에서는 드론과 특정 구조물을 활용한 미세먼지 수집 방법을 제안하고 이의 효율성을 보여주고자 한다.

• 한국대기환경학회지
• /
• 제31권3호
• /
• pp.223-238
• /
• 2015

The $PM_{2.1}$ was collected by LVCI (low volume cascade impactor) during Group-A Period (September 1990 to December 2012) and the $PM_{2.5}$ was collected by HVAS (high volume air sampler) during Group-B Period (September 2009 to April 2012) at Kyung Hee University, Global Campus located on the boarder of Yongin and Suwon. The 8 water-soluble ions ($Na^+$, $NH_4{^+}$, $K^+$, $Mg^{2+}$, $Ca^{2+}$, $Cl^-$, $ NO_3{^-}$, and $SO_4{^{2-}}$) were analyzed by IC, and the 14 inorganic elements (Al, Mn, Si, Fe, Cu, Pb, Cr, Ni, V, Cd, Ba, Zn, Ti, Ag) were analyzed by XRF and ICP-AES after performing proper pre-treatments of each sample filter. The average total mass fractions of $SO_4{^{2-}}$, $NO_3{^-}$, and $NH_4{^+}$+ to $PM_{2.5}$ samples during Group-B Period were 0.39 in normal days, 0.44 in haze days, and 0.27 in Asian dust days, respectively; however, the average total mass fractions of Al, Fe, and Si to $PM_{2.5}$ mass were 0.043 in normal days, 0.021 in haze days, and 0.036 in Asian dust days, respectively. Especially the concentration of Pb was significantly decreased during Group-B Period rather than during Group-A Period, while Cr and Ni was increased during Group-B Period. In this study, we intensively compared the annual and seasonal patterns of major chemical species among normal days, haze days, and Asian dust days. Further we developed mass fraction profiles by collecting episode cases of haze days and Asian dust days, which were consisting of 22 chemical species. Those profiles are considered to be useful when applying various receptor models and establishing air quality management plans near future.

• 한국환경보건학회지
• /
• 제41권6호
• /
• pp.369-379
• /
• 2015

Objectives: The lack of reliable information on environmental pollution and health impacts related to asbestos contamination from abandoned mines has drawn attention to the need for a community health study. This study was performed to evaluate asbestos-related health symptoms among residents near abandoned asbestos mines located in the Chungcheong Provinces. In addition, exposure assessment for asbestos is needed although the exposure to asbestos was in the past. Methods: Past exposure to asbestos among inhabitants near abandoned asbestos mines was estimated by using surface sampling of deposited dust in indoor and outdoor residences. A total of 54 participants were divided into two groups with (34 cases) and without (20 controls) diseases related to asbestos. Surface sampling of deposited dust was carried out in indoor and outdoor residences by collecting 105 samples. Deposited dust for sampling was analyzed by polarization microscope (PLM) and scanning electron microscope?energy dispersive x-ray spectrometer (SEM-EDX) to detect asbestos. Subsequently, the elements of the deposited dust with asbestos were analyzed by SEM-EDX to assess the contribution of sources such as abandoned mines, slate and soil. Results: Among the 105 samples, asbestos was detected by PLM in 29 (27.6%) sampling points, and detected by SEM in 56 (48.6%) sampling points. Asbestos in indoor residences was detected by PLM in four sampling points, and by SEM in 12 sampling points. Asbestos detection in indoor residences may be due to ventilation between indoors and outdoors, and indicates long-term exposure. The asbestos detection rate for outdoor residences in the case group was higher than that in the control group. This can be explained as the case group having had higher exposure to asbestos, and there has been continuous exposure to asbestos in the control group as well as the case group. Conclusion: Past residential asbestos exposure may be associated with asbestosis among local residents near abandoned asbestos mines. Odds ratios were calculated for asbestos detection in outdoor residence by logistic regression analysis. Odds ratio between asbestos detection and asbestosis pulmonum was 3.36 (95% CI 0.90-12.53) (p=0.072), adjusting for age, sex, smoking status and work history with multi-variable logistic regression by PLM analysis method.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권2호
• /
• pp.9-14
• /
• 2020

필터가 장착 된 먼지 감소 팬을 포함하여 새로운 유형의 Composite Cyclone Scrubber를 개발하고, 목표 설치 및 유지 보수 비용에 대해서는 기존 도로 오염 저감 시스템 대비 64 %의 투자비 절감 (61 억 원 vs. 170 억 원), 기존 도로 오염 저감 조치 (72.6 억 원) 대비 사회적 비용편익이 43 % 증가, 50.8 억 원)가 예측되고 있다. 장치의 구성은 송풍기 형 나선형 가이드 베인이며, 분사 압력은 미세먼지를 포집한다. 분사 각도 및 접촉 범위가 다양한 노즐, 스프레이 액체 등과 순환 수를 이용한 스프레이이며, 분사 된 물이 Guide Vane과 45도 각도로 충돌로 인해 오염된 가스를 만나기 때문에 41.4 % 더 많은 미세 먼지를 포집한다. 이는 기존의 집진기보다 141 % 증가한 것이다. 포집 액체, 순환 빗물 및 우물 공급원과 관련하여 우리는 특허에서 막대한 양의 에너지와 경제적으로 절약되는 친환경 시스템을 기대한다. 가이드 베인 및 금속 필터는 90 % 이상의 미세 먼지를 줄였으며, 분무 된 물은 베인과 필터를 청소하여 유지 관리 예산을 최소화했다. 개발 된 설계의 예비 평가를 통해 특징적인 물분사로 인하여 유지 보수 예산을 줄일 수 있다.

• 환경위생공학
• /
• 제23권3호
• /
• pp.9-22
• /
• 2008

This study was conducted to develop a system that processes harmful gases and dust, which being generated in the production of micro-inorganic fabric. This can be obtained by melt spinning raw materials such as agalmatolite, fluorspar, limestone, silica under high temperature at $1500-1600^{\circ}C$ in a glass recuperator using a dry method by Cyclone Reactor or Envelope Type (ET) type Bag Filter. If the number of the members of Korea Glass Industry Association reaches up to 45, the damage of the harmful gas being generated in recuperator should not be small. In addition, research of existing facilities showed the most of harmful gas treatment facilities which adopt wet treatment or semi-dry treatment process. This was caused the problems for wastewater and the second pollutive materials. Moreover, in the dust collecting facility behind recuperator, it is also problematic that electric dust collector requires enormous initial investment. We have researched various methods to show both economic and efficient new processes for the preventive facilities of recuperator. As the result of the experiments, the removal efficiencies of HF and SOx were 99% and 87%, respectively. Although it was insignificant reaction, a pretty much interesting result that NOx showed an absorption reaction with $Ca(OH)_2$(removal efficiency was more than 25%) was obtained.

• 한국생산제조학회지
• /
• 제6권1호
• /
• pp.100-108
• /
• 1997

Electrostatic precipitator is the equipment that separates dust particles from the gas in which they are suspended. Specially, for the construction of industrial electrostatic precipitator, the corporations would send the layout design to a customer to accept an order. Therefore, it is made a detail drawing after accept ance. Since the layout design of electrostatic precipitator is very complex, it takes time and design errors are included. Thus, for competitiveness in these industries, the development of software for the layout design of electrostatic precipitator is important. In this study, the developed software deals with technical concept and layout design of industrial electrostatic precipitator. By using the software, design time was very short, design errors reduced largely, and the standardization of design could be carried out.