• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1115-1119
• /
• 2007

As in many of the vehicle NVH issues, blower motor noise has been improved over the years through intensive R&D and production process improvement. Durability of motors, however, still has room for improvement according to customer surveys such as VDS. To investigate the noise issues of blower motors in view of durability, current production motors along with major competitor motors are tested. The noise after accelerated durability test shows that production motors are competitive in noise level with similar noise performance compared to initial measurement. The test result also provided guidelines to the durability development process.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.151-154
• /
• 2006

It is generally referred that life cycle of concrete construction is depend on whether durability of concrete is obtained or not. Nevertheless, it has not been yet applied that new material and technology to improve durability of concrete such as seaside concrete construction. In this study, chemical agent which is capable of improving durability added to 2 types seaside concrete mixs and evaluated engineering properties such as slump, air content, setting time and compressive strength. Besides shrinkage crack with an restraint condition and chloride ion penetration tests were executed to measure resistance of concrete added chemical agent and then compared non-added. It was appeared that engineering properties and resistant for chlorides was possible to improved. But resistant for shrinkage crack was not noticeable improvement than non-added. Therefore it is necessary that more consideration and following study to improve durability aspect to shrinkage crack and chlorides resistant.

• 한국재난정보학회 논문집
• /
• 제15권1호
• /
• pp.28-38
• /
• 2019

연구목적: 본 연구는 건설 계측센서의 내구연한 저하원인 및 개선방안을 상세히 제시하여 건설구조물의 계측관리 수준향상과 계측센서의 기술발전에 기여하고자 한다. 연구방법: 건설 계측센서의 내구연한 저하원인 및 개선방안에 대하여 건설분야와 전기전자분야로 구분하여 상세한 현황을 조사하고 검토를 실시하였다. 연구결과: 건설분야는 승인 및 검수, 검사 및 시험, 검정 및 교정, 손망실율 최소화 방안 등을 조사 검토하였고, 전기전자분야는 센서패키지 및 실링, 응력집중부위 단선, 낙뢰 및 부식에 의한 손상 등을 조사 검토하였다. 결론: 건설분야와 전기전자분야에서 계측센서의 내구연한 저하원인 및 개선방안을 토대로 건설현장에 적용되는 계측센서의 내구연한이 현재보다 연장될 것으로 기대된다.

• 한국도로학회논문집
• /
• 제20권2호
• /
• pp.27-34
• /
• 2018

PURPOSES : It is necessary to prevent premature failure of concrete pavements caused by durability problems. The purpose of this study was to find factors affecting the durability of concrete pavements, and suggest improvement methods for existing concrete mix design. METHODS : Factors influencing durability were derived from laboratory test data for common field failure conditions and main properties of concrete cores taken from the field. The improvement of concrete properties was investigated by evaluating the performance of existing and proposed mix proportion designs and curing methods. RESULTS : The compressive strength and the absorbing performance of the low Blaine cement and the high-strength mixture were better than those of the Type I cement. Wet curing showed better compressive strength, elastic modulus, coefficient of thermal expansion, and absorption performance than air curing or compound curing. As a result of comparing concrete cores collected in the field, the sections with good durability showed good performance in terms of resistance to chloride ion penetration, absorption, and initial absorption rate. CONCLUSIONS : The absorption performance was considered as a possible foactor affecting durability of cement concrete pavements as a result of field core tests. In order to improve the durability of the pavement concrete, it is necessary to improve the existing mixtures and curing methods.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.991-996
• /
• 2001

The long-term durability characteristics of high-early-strength concrete were assessed. The effect of long-term durability characteristics of high-early-strength concrete were investigated. In experiment, two different types of fiber were adopted for improvement of durability. High-early-strength fiber reinforced concretes using regulated-set cements are compared with high-early-strength concrete without fiber. The durability performance of the laboratory-cured high-early-strength concrete specimens was determined by conducting an accelerated chloride permeability, abrasion resistance, freeze-thaw, surface deicer salt scaling and wet-dry repetition test. The results indicated that incorporation of fibers enhance durability performance.

• 한국방재학회 논문집
• /
• 제10권5호
• /
• pp.17-25
• /
• 2010

콘크리트의 내구성능 향상을 위한 방안으로서 시멘트 재료의 수밀성능 증진에 대한 연구를 수행하였다. 보통 포틀랜드 시멘트 및 보통 포틀랜드 시멘트와 플라이애쉬의 혼합계 재료에 다양한 성능의 수밀성능 개선제를 혼합하여 수밀성 실험을 진행한 결과, 시멘트 재료의 수밀성능 향상은 시멘트 수화생성물인 CSH의 생성과 유기지방산에 의한 수화물과의 접촉각의 크기와 밀접한 관계가 있으며 수화초기에 활발하게 생성되는 CSH는 수밀성과 장기적인 흡수율 저감에 영향을 주는 것으로 나타났다. 또한 시멘트 재료의 작업성 개선을 위하여 플라이애쉬를 사용하는 경우, 구형 플라이애쉬의 작업성 증진에 의해 시멘트 재료의 조직이 치밀화 되고 포졸란 재료의 특성에 의한 CSH의 생성으로도 수밀성이 향상 되는 것으로 나타났다. 다양한 종류의 수밀성 재료를 혼합하여 흡수율 및 수화 생성물의 변화에 대해 실험한 결과, 콘크리트의 내구성 향상을 위해서는 어떠한 형태이든 시멘트 재료에 수밀성 혼화제의 혼합 사용이 바람직 한 것으로 판단된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.147-150
• /
• 2007

As recent buildings often use low-quality concrete materials, are constructed defectively, and are put in extreme environmental conditions, many of them show the shortening of life resulting from the corrosion of reinforcing rods by salt damage, carbonization, freezing and thawing, cracking. This in turn raises the cost of repair and maintenance, so it is required to extend the life of structures through enhancing the durability of concrete. In response to the demand, researches on high-durability concrete are being made actively focused on the maximum water-cement ratio, the maximum unit quantity, the minimum cover thickness, the addition of mineral admixtures, etc. With this background, the present study examined the basic physical properties of concrete containing admixtures for enhancing the durability of concrete.

• Geomechanics and Engineering
• /
• 제12권5호
• /
• pp.785-801
• /
• 2017

Biopolymer treatment of geomaterials to develop sustainable geotechnical systems is an important step towards the reduction of global warming. The cutting edge technology of biopolymer treatment is not only environment friendly but also has widespread application. This paper presents the strength and slake durability characteristics of biopolymer-treated sand sampled from Al-Sharqia Desert in Oman. The specimens were prepared by mixing sand at various proportions by weight of xanthan gum biopolymer. To make a comparison with conventional methods of ground improvement, cement treated sand specimens were also prepared. To demonstrate the effects of wetting and drying, standard slake durability tests were also conducted on the specimens. According to the results of strength tests, xanthan gum treatment increased the unconfined strength of sand, similar to the strengthening effect of mixing cement in sand. The slake durability test results indicated that the resistance of biopolymer-treated sand to disintegration upon interaction with water is stronger than that of cement treated sand. The percentage of xanthan gum to treat sand is proposed as 2-3% for optimal performance in terms of strength and durability. SEM analysis of biopolymer-treated sand specimens also confirms that the sand particles are linked through the biopolymer, which has increased shear resistance and durability. Results of this study imply xanthan gum biopolymer treatment as an eco-friendly technique to improve the mechanical properties of desert sand. However, the strengthening effect due to the biopolymer treatment of sand can be weakened upon interaction with water.

• 품질경영학회지
• /
• 제47권3호
• /
• pp.453-465
• /
• 2019

Purpose: A main purpose is to increase the operational rate and reduce operating maintenance costs by Improving the durability of Blower of Military Armored Vehicle and Self-propelled Artillery. As a result, it is expected to improve the service quality of customers. Methods: After analyzing the cause of the stop of the blower, the improvement plans were established and the effectiveness of each improvement plans were verified by testing. Results: Mechanical, electrical and environmental factors affecting brush wear were reviewed, but it was difficult to specify the cause, which necessitated a review of the application of the BLDC motor. Conclusion: After applying the BLDC motor to the blower, tests proved that the existing blower can be replaced. It is expected that this study will help improve the durability life of similar equipment that is applied with Brushed DC motors as well as blowers.

• 한국지반공학회지:지반
• /
• 제12권2호
• /
• pp.115-132
• /
• 1996

연약지반 안정화공법으로서 각종 고결공법이 성행하고 있으나 해성점토지반이나 통수지반과 같은 특수조건하에서는 시공도 까다롭지만 강도발현이나 내구성 등의 측면에서 보강효과가 저하하는 것을 볼 수 있다. 고결공법은 혼합(고압)처리방식과 주입방식으로 대별할 수 있는 데, 본 연구에서는 첫째로 해성점토지반에 시멘트에 의한 지반보강시의 강도열화문제와 두번째로 지하수흐름이 있는 지반에서의 물유리계 약액주입시의 주입효과증대 및 내구성 문제에 촛점을 맞추어 그 해결방안을 검토 하였다.