• Corrosion Science and Technology
• /
• 제15권2호
• /
• pp.58-68
• /
• 2016

Many industries need the universal standard or technique to obtain the identical CCT regardless of specimen geometries. This study aimed to determine an appropriate applied torque to the cylindrical specimen defining the apparatus and the procedure to measure the temperature of initiating crevice corrosion in tubular shape products such as pipes, tubes and round rods etc; the test method also proved applicable to the plate type specimen. A series of experiments for CCT measurements with the plate type and cylindrical stainless steel specimens of various diameters with different microstructures (austenitic and duplex) and PRENs were conducted to determine the relationship among geometries on CCT. Thus, the apparatus that could measure the CCT of stainless steels with both plate and cylindrical geometries was newly designed. The use of the apparatus facilitated the same CCT value for both geometries only if the specimens were made of the same alloy. The applied torque can be calculated for various diameters of the cylindrical specimens using the following relation; Applied torque, $Nm=-0.0012D^2+0.019D+2.4463$ (D; the diameter of cylindrical specimen, mm). However, upwards of 35 mm diameter cylindrical specimens require 1.58Nm, which is the same torque for the plate type specimen; in addition, this test method cannot be used for cylindrical specimens of less than 15 mm diameter.

• 한국콘텐츠학회논문지
• /
• 제9권11호
• /
• pp.247-253
• /
• 2009

본 연구는 국소온열요법(Local Hyperthermia)에 사용되는 발열체(Thermo-rod)의 온도에 따른 세포성장률의 변화를 관찰하고자 한다. 연구에 사용된 발열체는 듀플렉스 스테인리스 강(Duplex Stainless Steel)을 이용하여 개발되었다. 세포성장률을 관찰하기 위하여 CPAE세포와 Osteoblast세포를 이용하였다. 각각의 세포를 well에 분주 후 3일, 6일, 9일, 12일, 15일 동안 배양만 한 군을 대조군으로 하고 well에 발열체를 식립 후 세포를 분주하여 3일 간격(3일, 6일, 9일, 12일, 15일)으로 하루 30분 유도가열을 실시하여 15일 간 배양한 군을 시험군으로 하였다. CPAE세포와 Osteoblast세포의 성장률을 관찰한 결과 두세포 모두 3일의 대조군과 시험군 모두 세포 성장률이 급격히 상승하다 6일의 대조군과 시험군 모두 급격히 감소하고 9일과 12일 그리고 15일의 대조군과 시험군의 성장률은 불규칙하게 감소하였다. 이러한 성장률 관찰 결과 두종의 세포 모두 약 $41^{\circ}C$의 온도를 가한 시험군과 온도를 가하지 않은 대조군의 차이가 없다. 따라서 CPAE세포와 Osteoblast세포는 발열체에 의한 온도(약 $41^{\circ}C$)에 영향이 없는 것으로 판단된다.

• Journal of Welding and Joining
• /
• 제18권1호
• /
• pp.59-69
• /
• 2000

The purpose of the present study was to investigate weld metallurgical phenomena such as primary solidification mode, microstructural evolution and hot cracking susceptibility in nitrogen-bearing austenitic stainless steel GTA welds. Eight experimental heats varying nitrogen content from 0.007 to 0.23 wt.% were used in this study. Autogenous GTA welding was performed on weld coupons and the primary solidification mode and their microstructural characteristics were investigated from the fusion welds. Varestraint test was employed to evaluate the solidification cracking susceptibility of the heats and TCL(Total Crack Length) was used as cracking susceptibility index. The solidification mode shifted from primary ferrite to primary austenite with an increase in nitrogen content. Retained delta ferrite exhibited a variety of morphology as nitrogen content varied. The weld fusion zone exhibited duplex structure(austenite+ferrite) at nitrogen contents less than 0.10 wt.% but fully austenitic structure at nitrogen contents more than 0.20 wt.%. The weld fusion zone in alloys with about 0.15 wt.% nitrogen experienced primary austenite + primary ferrite solidification (mode AF) and contained delta ferrite less than 1% at room temperature. Regarding to solidification cracking susceptibility, the welds with fully austenitic structure exhibited high cracking susceptibility while those with duplex structure low susceptibility. The cracking susceptibility increased slowly with an increase in nitrogen content up to 0.20 wt.% but sharply as nitrogen content exceeded 0.20 wt.%, which was attributed to solidification mode shift fro primary ferrite to primary austenite single phase solidification.

• 한국항공우주학회지
• /
• 제31권7호
• /
• pp.112-117
• /
• 2003

본 연구에서는 재생 냉각용 연소기에 적용되고 있는 동합금과 2상 스테인리스강의 최적 브레이징 조건을 구하였다. 모재는 C18200 동합금과 S31803 2상 스테인레스강을, 삽입금속으로 두께가 각각 50${\mu}m$, 80${\mu}m$인 AMS4764를 사용하였다. 브레이징한 시제에 대하여 X선 검사, 강도/기밀 및 파괴시험, 파단면 관찰을 한 결과 두께 50${\mu}m$인 삽입금속을 사용한 경우 강도특성과 접합면이 양호함을 확인하였다. 반면 두께 80${\mu}m$인 삽입금속을 사용한 경우는 강도특성은 양호하였으나 냉각유로의 막힘 현상과 유로 확대를 확인하였다.

• 한국표면공학회지
• /
• 제51권3호
• /
• pp.172-178
• /
• 2018

In this paper, effects of potassium permanganate, pottasium dichromate, sodium molybdate on lean duplex stainless steel were studied by GDOES, OCP, potentiodynamic curves. The stainless steels were chemically passivated in each nitric acid solutions containing 4wt.% oxidants for 1 hour. As a result, when potassium dichromate or sodium molybdate was added, content of Fe was decreased and content of Cr was increased. Consequently, corrosion resistance of passive film was increased. But in case of potassium permanganate was added, contrastively, content of Fe was increased and content of Cr was decreased. So corrosion resistance was decreased. Adding sodium molybdate in nitric acid for chemical surface treatment process was the most effective among oxidants and also it showed the most stable anti-corrosion in SST.

• Journal of Welding and Joining
• /
• 제31권5호
• /
• pp.20-25
• /
• 2013

This study was carried out to investigate the influence of a sigma phase precipitation on the pitting corrosion resistance and microstructural change of super duplex stainless steels(UNS S32750). The welds made by FCAW (Flux Cored Arc Welding) were heat treated ($930^{\circ}C$, $1080^{\circ}C$, $1230^{\circ}C$) and quenched. Based on the microstructural examination, it was found that the ${\sigma}$ phase was formed in base metals and welds heat treated at $930^{\circ}C$ while there were little ${\sigma}$phases formed in base metals and weld metal experienced the relatively fast cooling from $1080^{\circ}C$ and $1230^{\circ}C$. On the other hand, the most weight loss due to pitting corrosion occurred in base and weld metals heat treated at $930^{\circ}C$. It was confirmed that the pitting corrosion occurred in the phase boundaries of ferrite/sigma and austenite/sigma. The pitting corrosion resistance decreased owing to an increase in Cr, Mo depleted areas adjacent to the intermetallic phases such as ${\sigma}$phases. The hardness was greatly increased due to the precipitation ${\sigma}$phases.

• 한국표면공학회지
• /
• 제27권3호
• /
• pp.123-133
• /
• 1994

Oxidation behavior of STS 304 and 430, produced by POSCO, Korea, was studied in order to study the surface defects formed during manufacturing processes. Oxidation experiments were carried out in a preheat-ed furnace at 850~$1, 250^{\circ}C$ in air and in a simulated coke oven gas(COG) atmosphere. The reaction products were examined by XRD, SEM and EDX on their surfaces and cross sections. Protective $Cr_2O_3$-primary oxide film was formed initially, but at critical point this film was broken and a duplex scale consisting of $Fe_2O_3$- and Fe$Cr_2O_4$- was formed. It was more severely attacked in a simulated COG atmosphere than in air, and STS 304 was superior to STS 430 in oxidation resistance.

• Nuclear Engineering and Technology
• /
• 제47권6호
• /
• pp.712-718
• /
• 2015

Cast duplex stainless steels are susceptible to thermal aging during long-term service at temperatures ranging from $280^{\circ}C$ to $450^{\circ}C$. To analyze the effect of thermal aging on leak-before-break (LBB) behavior, three-dimensional finite element analysis models were built for circumferentially cracked pipes. Based on the elasticeplastic fracture mechanics theory, the detectable leakage crack length calculation and J-integral stability assessment diagram approach were carried out under different bending moments. The LBB curves and LBB assessment diagrams for unaged and thermally aged pipes were constructed. The results show that the detectable leakage crack length for thermally aged pipes increases with increasing bending moments, whereas the critical crack length decreases. The ligament instability line and critical crack length line for thermally aged pipes move downward and to the left, respectively, and unsafe LBB assessment results will be produced if thermal aging is not considered. If the applied bending moment is increased, the degree of safety decreases in the LBB assessment.