• 제목/요약/키워드: Dual-radio

검색결과 194건 처리시간 0.034초

Software Defined Radio를 위한 I/Q 부정합 보정 기능을 갖는 이중 대역 Six-Port 직접변환 수신기 (Dual-Band Six-Port Direct Conversion Receiver with I/Q Mismatch Calibration Scheme for Software Defined Radio)

  • 문성모;박동훈;유종원;이문규
    • 한국전자파학회논문지
    • /
    • 제21권6호
    • /
    • pp.651-659
    • /
    • 2010
  • 본 논문에서는 software defined radio(SDR) 기반의 고속의 다중 모드, 다중 대역을 위한 새로운 six-port 직접변환 수신기를 제안한다. 설계한 수신기는 2개의 CMOS four-port BPSK 수신기와 직교 LO 신호 발생을 위한 이중 대역 1단 polyphase 필터로 구성되어 있다. 0.18 ${\mu}m$ CMOS 공정을 이용하여 마이크로파 대역에서 처음으로 개발한 four-port 수신기는 두 개의 능동 결합기, 능동 발룬, 두 개의 전력 검출기 및 아날로그 디코더로 구현되어 있다. 제안한 polyphase 필터는 type-I 구조를 선택하였으며, LO 신호의 전력 손실을 줄이기 위하여 1단으로 구현 하였고, 커패시터를 사용하는 것 대신하여 LC 공진구조를 적용하여 이중 대역 동작을 구현하였다. 제안한 sixport 수신기의 RF 가용범위를 확장하기 위하여, six-port junction과 전력 검출기에 I/Q 위상 및 크기를 보정하는 회로를 추가하였다. 제안한 회로에서 위상과 크기 부정합의 보정 범위는 각각 8도와 14 dB이다. 제작한 six-port 수신기는 이중 대역인 900 MHz와 2.4 GHz 대역에서 M-QAM, M-PSK의 40 Msps의 변조 신호를 성공적으로 복조하였다.

NOR 형태의 고속 dual-modulus 프리스케일러 (A NOR-type High-Speed Dual-Modulus Prescaler)

  • 성기혁;김이섭
    • 전자공학회논문지SC
    • /
    • 제37권2호
    • /
    • pp.69-76
    • /
    • 2000
  • dual-modulus 프리스케일러는 제어신호의 값에 따라 입력신호를 두 개의 모듈러스(modulus) 중에서 하나의 값으로 나누는 회로이다. 본 논문에서는 일반적인 ratioed-NAND구조가 아닌, ratioed-NOR구조를 가진 새로운 고속 dual-modulus 프리스케일러를 제안한다. 제안하는 회로는 NMOS를 직렬 연결하는 대신 병렬 연결함으로써 기존 회로보다 더 고속으로 작동한다. 현대 0.65(m 2-poly 2-metal CMOS 공정 파라미터를 사용한 HSPICE 모의 실험 결과, 25℃의 온도와 5V전원전압의 환경에서, 40.7㎽의 전력을 소모하고 최대 동작 주파수는 2.8㎓라는 것을 얻었다. 제안하는 dual-modulus 프리스케일러는 셀룰라 라디오의 입력단에서 주파수 합성을 하는 데에 이용될 수 있을 것이다.

  • PDF

유도결합 RFID 시스템에서 이중 코일 안테나를 이용한 잡음의 감소 (Noise Reduction in an Inductively Coupled RFID System Using a Dual Coil Antenna)

  • 이성호
    • 한국전자파학회논문지
    • /
    • 제18권6호
    • /
    • pp.648-655
    • /
    • 2007
  • 본 논문에서는 유도결합을 이용한 RFID 시스템에서 주변의 RF 잡음의 영향을 감소할 수 있는 이중 코일 안테나를 새로이 제안하고 실험하였다. 이중 코일 안테나는 동일한 구조의 코일 2개가 직렬로 연결되어 있으며 두 코일에 유도되는 잡음 전압의 크기가 같고 극성이 반대가 되어 서로 상쇄되도록 고안된 구조이다. RFID 리더에 이중 코일 안테나를 사용한 경우에 단일 코일 안테나에 비하여 RF 유도 잡음이 약 15 dB 감소하였다.

유사 직교 부호 기반 이중 대역 Guardian 모뎀의 물리계층 설계 (Physical Layer Design of Dual-Band Guardian Modem based on Quasi-Orthogonal Code)

  • 이현석;조진웅;홍대기
    • 전기학회논문지
    • /
    • 제62권1호
    • /
    • pp.127-132
    • /
    • 2013
  • In this paper, we design the physical layer of Guardian modem for wireless public networks. The physical layer is composed of a dual-band RF (Radio Frequency) transceiver and a baseband-processor with quasi-orthogonal codes. The 2.4/5GHz dual-band RF transceiver can overcome the communication difficulty of dense 2.4GHz band for wireless public environment. Also the quasi-orthogonal code can reduce the required ASIC (Application Specific Integrated Circuit) design area. Finally, we analyze the performance of the developed system in viewpoint of data rate, BER (Bit Error Rate), PER (Packet Error Rate). Moreover we verify the performance of the dual-band RF communication.

Effects of Phase Difference between Voltage loaves Applied to Primary and Secondary Electrodes in Dual Radio Frequency Plasma Chamber

  • Kim, Heon-Chang
    • 반도체디스플레이기술학회지
    • /
    • 제4권2호
    • /
    • pp.11-14
    • /
    • 2005
  • In plasma processing reactors, it is common practice to control plasma density and ion bombardment energy by manipulating excitation voltage and frequency. In this paper, a dually excited capacitively coupled rf plasma reactor is self-consistently simulated with a three moment model. Effects of phase differences between primary and secondary voltage waves, simultaneously modulated at various combinations of commensurate frequencies, on plasma properties are investigated. The simulation results show that plasma potential and density as well as primary self-dc bias are nearly unaffected by the phase lag between the primary and the secondary voltage waves. The results also show that, with the secondary frequency substantially lower than the primary frequency, secondary self·do bias remains constant regardless of the phase lag. As the secondary frequency approaches to the primary frequency, however, the secondary self-dc bias becomes greatly altered by the phase lag, and so does the ion bombardment energy at the secondary electrode. These results demonstrate that ion bombardment energy can be more carefully controlled through plasma simulation.

  • PDF

PCB 결합 급전구조를 가지는 광대역 이중편파 다이폴 안테나 (Broadband Dual Polarization Dipole Antenna with Feeding Structure of PCB Coupling)

  • 박철근;민경식
    • 한국전자파학회논문지
    • /
    • 제28권3호
    • /
    • pp.163-169
    • /
    • 2017
  • 본 논문에서는 700 MHz 대역 기지국용 이중편파 다이폴 안테나의 광대역화 방법을 제안하였다. 제안된 안테나는 금속성분의 방사부 중심에 PCB 급전부가 결합되는 구조이다. 제안된 안테나의 방사부와 급전부 설계는 모의실험을 통해 최적화하였다. 제안한 안테나(대역폭 31.6 %)는 기준 안테나(대역폭 19.4 %)와 동일한 크기를 유지하면서도 기존보다 낮은 주파수 대역으로 12.2 % 이상 광대역화 하였다. S-파라미터, 방사패턴, 이득의 측정 결과는 모의실험 결과와 잘 일치하였다.

UHF RFID 리더기용 송수신 겸용 이중 편파 안테나 (Dual-Polarized Tx/Rx Antenna for UHF RFID Reader)

  • 강채운;윤기호
    • 한국전자파학회논문지
    • /
    • 제16권12호
    • /
    • pp.1213-1221
    • /
    • 2005
  • 본 논문에서는 UHF 대역의 RFID 리더기용 송수신 겸용 이중 편파 안테나를 설계${\cdot}$제작하였다. RFID reader용 안테나에서 가장 중요시되는 각 포트간의 격리도나 편파 분리도 특성을 개선시키기 위해서 송${\cdot}$수신부의 급전 구조를 각각 설계하였고, 안테나의 방사부의 여기 방식은 시퀀셜 로테이션 방식으로 여기시켜 축비 대역폭을 증가시켰다. 제작된 안테나의 측정 결과로는 900 MHz${\~}$928 MHz에서의 안테나 이득은 약 2.35 dBi, 3 dB의 축비 범위에서 축비 대역폭은 150 MHz, 포트 격리도는 -38 dB${\~}$-40 dB, 원형 편파의 편파 분리도는 -30dB${\~}$-40 dB의 결과를 얻을 수 있었다.

비대칭 이중대역 집중소자 전력분배기 (An Unequal Dual-Band Lumped Element Power Divider)

  • 류재현;김영;윤영철
    • 한국항행학회논문지
    • /
    • 제15권4호
    • /
    • pp.578-584
    • /
    • 2011
  • 본 논문은 집중소자를 사용한 이중대역 비대칭 전력 분배기를 제안 하였다. 분배기는 기존의 비대칭 윌킨슨 전력 분배기를 집중소자를 이용하여 단일대역에서 설계한 후, 여파기 변환 기법을 이용하여 이중대역 특성을 갖도록 설계하였다. 이러한 설계 방법의 특징은 비대칭 분배기 설계 시 마이크로스트립으로 구현이 어려운 높은 임피던스의 전송선로를 집중소자를 이용하여 쉽게 구현할 수 있고, 크기를 작게 할 수 있다는 것이다. 여파기 변환기법에 의한 이중대역 특성을 확인하기 위하여 전력 분배기를 880 MHz와 1650 MHz에서 동작하도록 제작하였으며, 전기적인 특성은 시뮬레이션 결과와 동일하였다.

Decimation Chain Modeling for Dual-Band Radio Receiver and Its Operation for Continuous Packet Connectivity

  • Park, Chester Sungchung;Park, Sungkyung
    • Journal of information and communication convergence engineering
    • /
    • 제13권4호
    • /
    • pp.235-240
    • /
    • 2015
  • A decimation chain for multi-standard reconfigurable radios is presented for 900-MHz and 1,900-MHz dual-band cellular standards with a data interpolator based on the Lagrange method for adjusting the variable data rate to a fixed data rate appropriate for each standard. The two proposed configurations are analyzed and compared to provide insight into aliasing and the signal bandwidth by means of a newly introduced measure called interpolation error. The average interpolation error is reduced as the ratio of the sampling frequency to the signal BW is increased. The decimation chain and the multi-rate analog-to-digital converter are simulated to compute the interpolation error and the output signal-to-noise ratio. Further, a method to operate the above-mentioned chain under a compressed mode of operation is proposed in order to guarantee continuous packet connectivity for inter-radio-access technologies. The presented decimation chain can be applied to LTE, WCDMA, GSM multi-mode multi-band digital front-end which will ultimately lead to the software-defined radio.