• The KIPS Transactions:PartC
• /
• v.13C no.2 s.105
• /
• pp.177-184
• /
• 2006

A handover is a technology that enables data transmission and receipt seamlessly while a mobile station moves from the current base station to another base station. The handover is basically classified into two types; a horizontal handover which changes a radio link only without changing a network link, and a vertical handover which changes both in heterogeneous networks. In this paper, we propose a vertical handover protocol in a dual base station which supports both of W-CDMA and WiBro networks based on SDR (Software Defined Radio), verify the rightness using a state transition diagram and a Petri-net, and evaluate the performance of the proposed protocol using NS-2 simulator.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.4
• /
• pp.343-350
• /
• 2003

Circularly polarized-dual band antenna for GPS(Global Positioning System) and satellite radio system is developed and measured. Both circular polarization and overall antenna dimension reduction are achieved by placing a partially filled high-permittivity substrate under radiating edges. The bandwidth is also improved by choosing an optimal geometric configuration with a partially filled high permittivity substrate. The proposed antenna can be installed on moving vehicles or ships.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.231-234
• /
• 2005

In this paper, Dual-polarized Tx/Rx antenna for RFID reader is designed and fabricated to apply to RFID reader. Each feeding network of Tx/Rx is designed to improve the port-isolation and cross-polarization, and sequential rotation feeding scheme has been applied to increase of axial ratio bandwidth. Measured results show that 2.35dBi of antenna gain in 900MHz$\sim$928MHz, 150MHz of 3dB axial ratio bandwidth, -38dB$\sim$-40dB of port-isolation, and -30dB$\sim$-40dB of cross-polarization.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.4
• /
• pp.296-299
• /
• 2008

The effects of radio frequency (RF) source power for decoupled plasma nitridation (DPN) process on the electrical properties and Fowler-Nordheim (FN) stress immunity of the oxynitride gate dielectrics for deep nano-technology devices has been investigated. With increase of RF source power, the threshold voltage (Vth) of a NMOS transistor(TR) decreased and that of a PMOS transistor increased, indicating that the increase of nitrogen incorporation in the oxynitride layer due to higher RF source power induced more positive fixed charges. The improved off-current characteristics and wafer uniformity of PMOS Vth were observed with higher RF source power. FN stress immunity, however, has been degenerated with increasing RF source power, which was attributed to the increased trap sites in the oxynitride layer. With the experimental results, we could optimize the DPN process minimizing the power consumption of a device and satisfying the gate oxide reliability.

• Journal of electromagnetic engineering and science
• /
• v.16 no.3
• /
• pp.159-163
• /
• 2016

In this paper, a frequency tunable double band-stop resonator (BSR) with voltage control by varactor diodes is suggested. It makes use of a half-wavelength shunt stub as its conventional basic structure, which is replaced by the distributed LC block. Taking advantage of the nonlinear relationship between the frequency and electrical length of the distributed LC block, a dual-band device can be designed easily. With two varactor diodes, the stop-band of the resonator can be easily tuned by controlling the electrical length of the resonator structure. The measurement results show the tuning ranges of the two operating frequencies to be 1.82 GHz to 2.03 GHz and 2.81 GHz to 3.03 GHz, respectively. The entire size of the resonator is $10mm{\times}11mm$, which is very compact.

• ETRI Journal
• /
• v.25 no.5
• /
• pp.379-386
• /
• 2003

This paper presents the design of a narrow-band channel filter and its group-delay equalizer for a Ka-band satellite transponder. We used an 8th order channel filter for high selectivity with an elliptic-integral function response and an inline configuration. We designed a 2-pole, reflection-type, group-delay equalizer to compensate for the steep variation of the group-delay at the output of the channel filter, keeping the thermal stability at ${\pm}7$ ns of group-delay variation at the band edges over 15-55$^{\circ}C$. We devised a new tuning technique using short-ended dummy cavities and used it for tuning both the filter and equalizer; this removes the necessity of additional tuning after the cavities are assembled. Through measurement, we demonstrate that the group-delay-equalized filter meets the equipment requirements and is appropriate for satellite input multiplexers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.674-680
• /
• 2008

An SDR (Software Defined Radio) system based on general purpose computing platform has benefits of ease of software development process, high degree of software compatibility, and cost-effectiveness of general purpose processors. This paper discusses design and implementation of a dual-mode SDR system that supports both cordless phone and walkie-talky system running on Linux-based general purpose computing platform. For this purpose, we designed modulation and demodulation software on open source-based GNU radio middleware. We also designed a customized RF front-end hardware which performs frequency conversion between RF and IF. The proposed SDR system successfully exhibited its ability to operate both cordless phone and walkie-talky communication on Intel processor-based general purpose computing platform. But experience with the prototype SDR system shows that further research is required for run-time software reconfiguration and efficient integration with conventional TCP/IP protocol stacks.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.6
• /
• pp.661-668
• /
• 2012

In this paper, a dual-fed small ICS repeater antenna with high isolation is designed, fabricated, and measured. Bandwidth and gain are optimized by changing the stub lengths near main patch and power divider, and also by changing the size of parasitic patch. To improve the isolation characteristic of the antenna, a dual-feeding method is applied in designing the antenna. The fabricated antenna has a VSWR less than 2, a gain over 7 dBi, and an isolation between the donor and the server antennas less than -65 dB from 1,920~2,170 MHz for 3G mobile communication.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.245-251
• /
• 2011

In this paper, dual-band bandpass filter by using Pseudo-Interdigital Stepped-Impedance Resonator(PI-SIR) and Open-Loop Ring Resonator(OLRR) is proposed. The first passband and second passband are formed by PI-SIR and the second passband is reinforced by an OLRR. In a PI-SIR the first band and second band are easily and exactly adjusted by characteristic impedance ratio and electrical length ratio. The proposed design method may be confirmed to be useful from fabricated and measured results for dual-band bandpass filter operated at 2.45 GHz and 5.8 GHz.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.7
• /
• pp.23-31
• /
• 2012

Resource allocation, such as joint rate control and scheduling, is an important issue in cognitive radio networks. However, it is difficult to jointly consider the rate control and scheduling problem due to the stochastic behavior of channel availability in cognitive radio networks. In this paper, we propose an asymmetric joint rate control and scheduling technique under reliability constraints in cognitive radio networks. The joint rate control and scheduling problem is formulated as a convex optimization problem and substantially decomposed into several sub-problems using a dual decomposition method. An algorithm for secondary users to locally update their rate that maximizes the utility of the overall system is also proposed. The results of simulations revealed that the proposed algorithm converges to a globally optimal solution.