• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.383-388
• /
• 2004

In this paper an alternative Active Matrix LCD technology is described with scalable, low cost processing. The Dual Select Diode AMLCD requires 60% lower capital investment in the array process than a-Si TFT arrays and results in 20% lower cost LCD modules. Development at several AMLCD manufacturers is in progress.

• Physical Therapy Korea
• /
• v.17 no.3
• /
• pp.20-30
• /
• 2010

This study examined whether any changes by mental task types on postural control in chronic stroke persons. Sixteen chronic stroke persons (mean age=53.75 yr) and sixteen age-and gender-matched healthy controls (mean age=54.44 yr) took part in this study. Participants randomly performed three different tasks on the stable and unstable surfaces. The no mental task was to stand while holding a 100 g weight in each hand, the arithmetic task (mental task) was to perform a silent 1-backwards counting while standing and holding a 100 g weight in each hand, and the simple task (mental task) was to stand and hold with both hands a tray (200 g) on which a glass filled with water has been placed. Sway path and sway velocity of the center of pressure (COP) were measured to assess standing postural control by task performance using the force platform. According to the results, in stroke group, total sway path and total sway velocity of COP was significantly decreased during arithmetic and simple task compared to no mental task on the stable surface (p<.05), and sway path (anteroposterior AP, mediolateral ML) of COP, total and sway velocity (AP, ML, total) of COP was significantly decreased during arithmetic and simple task compared to no mental task on the unstable surface (p<.05). Especially, sway path (AP, total) of COP and sway velocity (AP, ML, total) of COP was significantly decreased under the simple task when compared to the arithmetic task on the unstable surface (p<.05). In healthy control group, sway path (AP, ML, total) of COP and sway velocity (AP, ML, total) of COP was significantly decreased during arithmetic and simple task compared to no mental task on the stable and unstable surface (p<.05), and sway path (AP, total) of COP and sway velocity (AP, ML, total) of COP was significantly decreased under the simple task when compared to the arithmetic task on the unstable surface (p<.05). In conclusion, the findings of this study showed that arithmetic and simple task improved standing postural control for chronic stroke patients and the type of arithmetic and simple tasks were critical factor that reduced standing postural sway in dual-task conditions. Future research should determine whether dual-task conditions, including simple task, would be effective as a training program for standing postural control of stroke patients.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.1
• /
• pp.1-9
• /
• 2017

With the Development of Wireless Network Technology and Wireless Link Technology, Wireless Mesh Network (WMN) is Attracting Attention as a Key Technology to Construct the Wireless Transit Network. The WMN has been Studied for a Long Time in Various Fields, however there are still many Problems that have not been solved yet. One of them is the Routing Problem to find an Optimal path in a Multi-hop Network Composed of Wireless Links. In the Hybrid-WMN, which is one of the Three Types of WMN, Optimal Path Selection Requires Research on Path Search Protocols that Effectively use the Infrastructure Mesh as a Transit Network, Together with Research for a Routing Metric with Excellent Performance. Therefore, this Paper Proposes a Dual Mode-AODV(Ad hoc On-demand Distance Vector) for Hybrid-WMN. Simulation result shows that the Path Selection Delay was Reduced by 52% than AODV when the Proposed Dual Mode-AODV was applied.

• Knowledge Management Research
• /
• v.23 no.4
• /
• pp.159-175
• /
• 2022

As creativity is a crucial attribute for companies' survival and innovative success, many firms encourage and implement ways to promote employee creativity. Previous studies in the dual pathway to creativity model have shown that creativity can be enhanced when either the cognitive flexibility or cognitive persistence path is triggered. Although individuals have different personal traits, prior research has rarely investigated whether one pathway is more effective for a certain personality in promoting creativity than the other. Using attachment theory, we examined the influence of attachment style on the degree of the impact of each path on creativity. Specifically, we hypothesized that securely attached people would show higher creativity only when they use the cognitive flexibility path. Data from the US support our hypothesis. Our research highlights that the link between cognitive flexibility and creativity is salient when securely attached people use the cognitive flexibility path because of the strong fit between secure attachment and flexible thinking.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.423-427
• /
• 1993

A velocity planning method is proposed that ensures collision-free and minimal delay-time motions for two robotic manipulators and auxiliary equipments. Additional path, which makes robot start with possible largest speed, is added to the original prescribed path of one of two robots, and this running start along the additional path reduces delay time introduced to avoid collision between the robots and therefore reduces total traveling time.

• Journal of applied mathematics & informatics
• /
• v.30 no.1_2
• /
• pp.127-133
• /
• 2012

We establish the polynomial convergence of a new class of path-following methods for SDLCP whose search directions belong to the class of directions introduced by Monteiro [3]. We show that the polynomial iteration-complexity bounds of the well known algorithms for linear programming, namely the short-step path-following algorithm of Kojima et al. and Monteiro and Alder, carry over to the context of SDLCP.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1998.03a
• /
• pp.11-16
• /
• 1998

The classical algorithm for solving liner network flow problems are primal cost improvement method, including simplex method, which iteratively improve the primal cost by moving flow around simple cycles, which iteratively improve the dual cost by changing the prices of a subset of nodes by equal amounts. Typical iteration/shortest path algorithm is used to improve flow problem of liner network structure. In this paper we stdudied about the implemental method of shortest path which is a practical computational aspects. This method can minimize the best neighbor node and also implement the typical iteration which is $\varepsilon$-CS satisfaction using the auction algorithm of linear network flow problem

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2311-2318
• /
• 2005

Progress in the LCD industries has been very rapid. Therefore, their manufacturing lines require larger LCD glass-handling robots and more precise path control of the robots. In this paper, we present two practical advanced algorithms for high-precision path generation of an LCD glass-handling robot. One is high-precision path interpolation for continuous motion, which connects several single motions and is a reliable solution for a short robot cycle time. We demonstrate that the proposed algorithm can reduce path error by approximately 91% compared with existing algorithms without increasing cycle time. The second is real-time static deflection compensation, which can optimally compensate the static deflection of the handling robot without any additional sensors, measurement instruments or mechanical axes. This reduces vertical path error to approximately 60% of the existing system error. All of these algorithms have been commercialized and applied to a seventh-generation LCD glass-handling robot.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1433-1442
• /
• 1998

The thesis presents a dual audio decoder which can decode both AC-3 and MPEG-2 bitstream. The MPEG-2 synthesis processi s optimized via FFT to establish the common data path with AC-'3s. A dual audio decoder consists of a DSP core which performs the control-intensive part of each algorithm and a common synthesis filter which perfomrs the computation-intensive part. All the components of the dual audio decoder have been described in VHDL and simulated with a SYNOPSYS tool. The software modeling of the DSP core was used for functional validation. After being synthesized using 0.6 .mu.m-3ML technology standard cell, the dual audio decoder was simulated at gate-level with a COMPASS tool for hardware validation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.3
• /
• pp.227-233
• /
• 2023

Tardive dyskinesia is an involuntary neurological movement disorder caused by long-term use of dopamine receptor-blocking drugs leading to dental implications like uncontrolled gnashing and grinding of teeth which in turn imperil the oral rehabilitation procedures as the excessive load increases the risk of prosthesis fracture. A 40-year male with a medical history of tardive dyskinesia visited the hospital to receive oral rehabilitation for missing maxillary anterior teeth. After the oral examination, tooth preparation was done on teeth 13, 15, and 23. After that silicon impression was made and the gypsum cast was digitalized using a desktop scanner and an interim prosthesis was fabricated by milling a resin block. During the try-in, the occlusal one-third of the interim prosthesis was trimmed, and an auto-polymerizing acrylic resin was applied on the occlusal surfaces and inserted in the patient's mouth. Then, the functionally generated path (FGP) of occluding surfaces of opposing arches was traced on the resin surface. When the resin was hardened, the modified interim prosthesis was removed and digitized using an intraoral scanner. The scan image was used in designing the occlusal morphology of definitive prosthesis by modifying the design of the interim prosthesis using the dual scan method. Lastly, a monolithic zirconia prosthesis was fabricated by milling a zirconia block. The definitive prosthesis was delivered reflecting the patient's occlusal scheme. This case report shows that the FGP technique with the dual scan method can help in fabricating fixed prosthesis with harmonious occlusion in a tardive dyskinesia patient.