• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.151-152
• /
• 2006

Multi-hop system has advantage of low power consumption, improved cell capacity, and enlarged service coverage. Most of previous researches show that multi-hop relaying beyond dual-hop relaying does not improve system performance significantly. This leads most researches are focused on dual-hop relaying system. In this paper, we propose an optimal boundary condition to support maximal data rate for fluctuation of traffic load in single cell dual-hop relay system.

• International Journal of Contents
• /
• v.12 no.1
• /
• pp.65-69
• /
• 2016

Wireless communication chipsets have fixed transmission rate and communication distance. Although there are many kinds of chipsets with throughput and distance purpose, they cannot support various types of wireless applications. This paper provides theoretic research results in order to support various wireless applications requiring different throughput, delayed quality-of-service (QoS), and different communication distances by using a wireless communication chipset with fixed rate and transmission power. As a performance metric, the probability for a data frame that successfully receives at a desired receiver is adopted. Based on this probability, the average number of transmission in order to make a successful frame transmission is derived. Equations are utilized to analyze the performance of a single-hop with channel coding and a dual-hop without error correction matter transmission system. Our results revealed that single-hop transmission assisted by channel coding could extend its communication distance. However, communication range extending effect of the single-hop system was limited. Accordingly, dual-hop transmission is needed to overcome the communication distance limit of a chipset.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.6
• /
• pp.2095-2110
• /
• 2015

This paper presents a design for a throughput-efficient online relay selection scheme for dual-hop multi-relay cooperative networks. Problems arise with these networks due to unpredictability of the relaying link quality and high time-consumption to probe the dual-hop link. In this paper, we firstly propose a novel probing and relaying protocol, which greatly reduces the overhead of the dual-hop link estimation by leveraging the wireless broadcasting nature of the network. We then formulate an opportunistic relay selection process for the online decision-making, which uses a tradeoff between obtaining more link information to establish better cooperative relaying and minimizing the time cost for dual-hop link estimation to achieve higher throughput. Dynamic programming is used to construct the throughput-optimal control policy for a typically heterogeneous Rayleigh fading environment, and determines which relay to probe and when to transmit the data. Additionally, we extend the main results to mixed Rayleigh/Rician link scenarios, i.e., where one side of the relaying link experiences Rayleigh fading while the other has Rician distribution. Numerical results validate the effectiveness and superiority of our proposed relaying scheme, e.g., it achieves at least 107% throughput gain compared with the state of the art solution.

• Journal of Korea Multimedia Society
• /
• v.21 no.4
• /
• pp.493-498
• /
• 2018

In this paper, we provide the performance analyses of a dual-hop amplify-and-forward(AF) relay transmission composed of asymmetric radio-frequence(RF) and free-space optical(FSO) links. In the mixed RF/FSO system, a relay is equipped with two receive antennas for RF signals and one additional transmit antenna for FSO signals. In order to improve a performance of RF link, a switch-and-stay (SSC) diversity technique is applied at the relay which can provide a proper link performance with a low complexity. Specifically, we offer the performance analyses of the proposed system in terms of outage probability and secrecy outage probability. In numerical examples, we compare the system performances with no diversity and selection combining systems and verify our analytical results via computer-based Monte-Carlo simulations.

• Journal of Information Processing Systems
• /
• v.13 no.5
• /
• pp.1071-1088
• /
• 2017

For dual-hop multiple-input multiple-output (MIMO) decode-and-forward relaying systems, we propose a selective relaying scheme that uses orthogonal space-time block code (OSTBC) and transmit antenna selection with maximal-ratio combining (TAS/MRC) or vice versa at the first and second hops, respectively. The aim is to achieve an asymptotically identical performance to the dual-hop relaying system with only TAS/MRC, while requiring lower feedback overhead. In particular, we give the selection criteria based on the antenna configurations and the average channel powers for the first and second hops, assuming Rayleigh fading channels. Also, the numerical results are shown for the outage performance comparison between the dual-hop DF relaying systems with the proposed scheme, only TAS/MRC, and only OSTBC.

• Journal of electromagnetic engineering and science
• /
• v.10 no.2
• /
• pp.50-55
• /
• 2010

Orthogonal Frequency Division Multiplexing(OFDM) dual-hop systems can take full advantages of the techniques of both multi-hop communication and OFDM. To achievethis end, we propose a joint subcarrier matching, power allocation and bit loading algorithm operating under a total power constraint and the same Bit Error Rate(BER) threshold over all subcarriers. Simulation results demonstrated system throughput improvement compared to single-hop systems and dual-hop systems with different bit loading algorithms for each relay position, power constraint, and required BER.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.4
• /
• pp.655-660
• /
• 2024

Relay has been applied various communication environments due to its advantages of performance enhancement in communication systems. In this paper, we analyze the performance of a dual-hop communication system which uses one relay by considering asymmetric communication scenarios. The performance is based on bit error rate. Firstly, we compare the overall performance of dual-hop communication system under symmetric and asymmetric, and then analyze the performance depending on the resource allocation. Energy allocation and relay location are considered in the resource allocation. The performance of overall system for each energy allocation and relay location is analyzed. In addition, we analyze the performance of communication system when both energy and relay location are considered simultaneously. Based on the analyzed performance, we discuss the effect of resource allocation for symmetric and asymmetric environments.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.3
• /
• pp.40-47
• /
• 2012

In dual-hop relaying systems, the conventional partial relay selection is based on the channel information only for the first hop. On the other hand, the efficient partial relay selection is based on the channel information for the hop with the minimum of the average channel powers for the first and second hops at each end-to-end link since the correlation coefficient between the end-to-end link quality and the link quality of the hop with the minimum of the average channel powers for the first and second hops is larger than that between the end-to-end link quality and the link quality of the other hop. In this paper, the outage probability of the conventional partial relay selection and the efficient partial relay selection in dual-hop decode-and-forward relaying systems is analyzed for non-identically distributed Rayleigh fading channels. Through numerical investigation, the outage performance of the efficient partial relay selection is compared with the outage performances of the conventional partial relay selection and the best relay selection based on all the channel information for the first and second hops.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.69-74
• /
• 2017

Due to the advantage of communication coverage extension and removement of shadowing area, relay can be applied in various wireless communication systems. In this paper, we analyze performance of downlink with dual-hop communication systems which use a relay in railway environments. We adopted asymmetric communication system which use coherent modulation scheme in base station-relay link and differential modulation scheme in relay-destination link. The performance of communication system is analyzed using symbol error rate, and performance comparison with the systems which adopts fully coherent scheme is studied. We also investigate the performance of system depending on relay distance and energy allocation.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.9
• /
• pp.503-513
• /
• 2002

Since CC-NUMA architecture has to access remote memory, the interconnection network determines the performance of the CC-NUMA system. Bus which has been used as a popular interconnection network has many limits in a large-scale system because of the limited physical scalability and bandwidth. The dual ring interconnection network, composed of high-speed point-to-point links, is made to resolve the defects of the bus for the large-scale system. However, it also has a problem, in that the response latency is rapidly increased when many nodes are attached to the snooping based CC-NUMA system with the dual ring. In this paper, we propose a ring architecture with repeater nodes in order to overcome the problem of the dual ring on a snooping based CC-NUMA system, and design a repeater node adapted to this architecture. We will also analyze the effects of proposed architecture on the system performance and the response latency by using a probability-driven simulator.