• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.113-114
• /
• 2007

Hole mobility characteristics of single surface channel and dual channel Si/SiGe structure are compared, where the former one consists of a relaxed SiGe buffer layer and a tensile strained Si layer on top, and for dual channel structure a compressively strained SiGe layer is inserted between them. Due to the difference of hole mobility enhancement factors of layers between them, hole mobility characteristics with respect to the Si cap thickness shows the opposite tend. Hole mobility increases with thicker Si cap for single channel structure, whereas it decreases with thicker Si cap for dual channel structure.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.1
• /
• pp.44-48
• /
• 2008

Hole mobility characteristics of two representative biaxially strained SiGe/Si structures with high Ge contents are studied, They are single channel ($Si/Si_{1-x}Ge_x/Si$ substrate) and dual channel ($Si/Si_{1-y}Ge_y/Si_{1-x}Ge_x/Si$ substrate), where the former consists of a relaxed SiGe buffer layer with 60 % Ge content and a tensile-strained Si layer on top, and for the latter, a compressively strained SiGe layer is inserted between two layers, Owing to the hole mobility performance between a relaxed SiGe film and a compressive-strained SiGe film in the single channel and the dual channel, the hole mobility behaviors of two structures with respect to the Si cap layer thickness shows the opposite trend, Hole mobility increases with thicker Si cap layer for single channel structure, whereas it decreases with thicker Si cap layer for dual channel. This hole mobility characteristics could be easily explained by a simple capacitance model.

• Hip & pelvis
• /
• v.35 no.4
• /
• pp.277-280
• /
• 2023

Dislocation after a total hip arthroplasty occurs in approximately 1% of patients; however, the frequency is much higher after revision surgery. To prevent dislocation, use of a larger femoral head is recommended, and a dual mobility femoral head has been introduced. However, reducing the dual mobility femoral head to the acetabular component is difficult in cases involving contracture in the soft tissue around the joint. A 72-year-old male patient who developed a periprosthetic joint infection underwent two-stage revision surgery using MUTARS^®. Two months after the revision, the hip joint became dislocated and manual reduction was attempted; however, dislocation occurred again. During another revision using a dual mobility bearing, the soft tissue around the hip joint was too tight to reduce. The problem was overcome by first repositioning the dual mobility head into the acetabular socket, followed by assembly of the diaphyseal portion of the implant.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.9
• /
• pp.1110-1116
• /
• 2004

Experimental measurements of laser-induced ion mobility(LIIM) were performed for ethene/air premixed flames operated near the soot inception point. Soot was ionized using a pulsed laser operated at 532 nm. The ionization signal was collected with a tungsten electrode located in the post-flame region. ionization signals were collected using both a single electrode and dual electrode configuration. Prior LIIM studies have focused on the use of a single biased electrode to generate the electric field, with the burner head serving as the path to ground. In many practical combustion systems, a path to ground is not readily available. To apply the LIIM diagnostic to these geometries, a dual electrode geometry must be employed. The influence of electrode configuration, flame equivalence ratio, and flame height on ionization signal detection was determined. The efficacy of the LIIM diagnostic to detect soot inception in the post-flame region of a premixed flame using a dual electrode configuration was investigated. For the different dual electrode configurations tested, the dual parallel electrode geometry was observed to be most sensitive to detect the soot inception point in a premixed flame.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.135-135
• /
• 2009

In this work we compared the electrical characteristic of single gate and dual gate in MIC-TFT. We fabricated p-channel TFTs based on MIC structure. In mobility, dual gate ($61.35cm^2/Vsec$) got a higher value than single gate ($55.96cm^2/Vsec$). In $I_{on}/I_{off}$ dual gate ($6.94{\times}10^6$) got a higher value than single gate ($1.72{\times}10^6$) too. In $I_{off}$, dual gate got a lower value than single gate. Therefore, dual gate is good and less power consumption than single gate.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.10a
• /
• pp.13-20
• /
• 1993

The sorption equilibria and permeation rates for carbon dioxide in such glassy polymer membranes with high glass-transition temperature as polyimide, polyetherimide, polysulfone and polyethersulfone membranes, were measured. The sorption isotherms for these systems can be described well by the dual-mode sorption model, whereas the pressure dependences of the mean permeability coefficients are simulated better by a modified dual-mode mobility model than the conventional dual-mode mobility model in which the Henry's law and Langmuir populations execute four kinds of diffusive movement.

• Journal of Veterinary Clinics
• /
• v.39 no.6
• /
• pp.390-394
• /
• 2022

A 6-year-old, 36.5 kg castrated male Golden Retriever presented for revision surgery for left total hip replacement. The patient underwent removal of the cup and head implants due to unmanageable prosthetic hip dislocation, despite revision surgery. On physical examination, the dog showed persistent weight-bearing lameness after exercise of the left hindlimb with mild muscle atrophy. Radiographic examination revealed dorsolateral displacement of the femur with a remnant stem and bony proliferation around the cranial and caudal acetabulum rims. The surgical plan was to apply the dual mobility cup to increase the range of motion and jump distance to correct soft tissue elongation and laxity caused by a prolonged period of craniodorsal dislocation of the femur. The preparation of the acetabulum for cup fixation was performed with a 29-mm reamer, and the 29.5-mm outer shell was fixed with five 2.4-mm cortical screws. The head and medium neck of the dual-mobility system were placed on the cup, and the hip joint was reduced between the neck and stem. The dog exhibited slight weight bearing on a controlled leash walk the day after surgery. The patient was discharged 2 weeks postoperatively without any complications. Six months postoperatively, osseointegration and a well-positioned cup implant were observed, and the dog showed excellent limb function without hip dislocation until 18 months of phone call follow-up.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.500-505
• /
• 2022

In this study, we designed oxide thin-film transistors (TFTs) with dual gate and tri layered split channels, and investigated the structural effect of the TFTs on the electrical characteristics. The dual gates played a key role in increasing the driving current, and the channel structure of tri layers and split form contributed to the increase in the carrier mobility. The tri layered channels consisting of the a-ITGZO and two ITO layers inserted between the gate dielectric and a-ITGZO led to the increase in the on-current by using ITO layers with high conductivity, and the split channels lowered series resistance of the channels. Compared with the mobility (15 cm²/V·s) of the single gate a-ITGZO TFT, the mobility (134 cm²/V·s) of the dual gate tri-layer split channel TFT was remarkably enhanced by the structural effect.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1182-1191
• /
• 2011

In this paper, we propose a network-based IP mobility management scheme, called Access Independent Mobile Service with IPv4/IPv6 Dual Stack (AIMS-DS), which can provide high-quality multimedia services to IPv4/IPv6 dual-stack mobile nodes (MNs) without any interruption over various wireless/wired access networks. The proposed scheme provides an MN with a fast and reliable mobility service among heterogeneous wireless access networks through the network-based control, the complete separation method of control and data plane, the cross-layer (layer2 and layer3) interworking method for handover control acceleration, etc, In addition, the proposed AIMS-DS can provide seamless mobility service to an MN under the environments of IPv4/IPv6 coexisting networks through the home address mobility support and transport network support. Through performance evaluation with computer simulations, we have shown the superiority of the proposed AIMS-DS in terms of handover latency, packet 1085 and packet delivery latency.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.12
• /
• pp.54-62
• /
• 2007

Mobile IPv6 is the representative standard protocol proposed to offer mobility of mobile hosts, but it has drawbacks such as high handover latency and packet loss during handover. To complement these drawbacks, several protocols have been proposed and they can support faster handover than the Mobile IPv6, but there still exists inevitable packet loss during handover in those protocols. In this paper, we propose a new handover procedure of mobile host who has a dual link for minimizing packet loss rate during micro handover to improve mobility capability of Cellular Ethernet system that supports mobility at layer 2. And we derive the superiority of proposed scheme by comparing in terms of packet loss rate, handover latency and throughput of proposed scheme with those of Hierarchical Mobile IPv6 which is the representative IP-layer micro mobility protocol by simulation.