• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권9호
• /
• pp.2120-2133
• /
• 2013

In this paper, we address the problem of linear minimum mean-squared error (MMSE) transmitter design for the cognitive radio (CR) multi-user multiple-input single-output (MU-MISO) broadcasting channel (BC), where the cognitive users are subject to not only a sum power constraint, but also a interference power constraint. Evidently, this multi-constraint problem renders it difficult to solve. To overcome this difficulty, we firstly transform it into its equivalent formulation with a single constraint. Then by utilizing BC-MAC duality, the problem of BC transmitter design can be solved by focusing on a dual MAC problem, which is easier to deal with due to its convexity property. Finally we propose an efficient two-level iterative algorithm to search the optimal solution. Our simulation results are provided to corroborate the effectiveness of the proposed algorithm and show that this proposed CR MMSE-based scheme achieves a suboptimal sum-rate performance compared to the optimal DPC-based algorithm with less computational complexity.

• 대한산업공학회지
• /
• 제21권2호
• /
• pp.195-206
• /
• 1995

Higher utilization of warehouse space can be achieved by using automated mobile racking systems. Therefore, those systems may be employed for factories or distribution centers as a good option of increasing the storage capacity. In this paper, travel-time models are developed to estimate the average performance of the system assuming randomized storage. Expected travel times are determined for both single- and dual-command cycles. Two extreme input/output-point locations are considered. Some numerical results obtained from the models are given.

• 한국광학회지
• /
• 제29권1호
• /
• pp.28-31
• /
• 2018

본 논문에서는 이중 광 콜리메터 광학계와 바이메탈 엑추에이터를 이용한 가변 광감쇠기를 제안하고 구현하였다. 입력광섬유와 출력광섬유 사이의 광손실은 바이메탈에 부착된 반사거울의 기울어진 각으로 조절되어진다. 바이메탈은 열전소자(TEC)에 의해 가열되거나 냉각되며 이로 인해 구부림이나 펴짐으로 인하여 반사거울을 움직이게 한다. TEC에 가해지는 전기신호로 원하는 광감쇠량을 얻을 수 있다. 제작된 소자는 0.5 dB의 삽입손실, 0.2 dB의 편광의존성 손실 및 40 dB 이상의 가변변위를 보였다. 반응 시간은 약 5초였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권4호
• /
• pp.1458-1470
• /
• 2018

In this letter, a new dual-port Multiple-Input Multiple-Output (MIMO) antenna is introduced which has two independent signal feeding ports in a single antenna element to achieve smaller antenna volumes for the 5G mobile applications. The dual-port structure is implemented by adding a cross coupled semi-loop (CCSL) antenna as the secondary radiator to the ground short of inverted-F antenna (IFA). It is found that the port to port isolation is not deteriorated when an IFA and CCSL is combined to form a dual-port structure. The isolation property of the proposed antenna is compared with a polarization diversity based dual-port antenna proposed in the literature [9]. The operating frequency range is 3.3-4.0 GHz which is suitable for places where $4{\times}4$ MIMO systems are supposed to be deployed such as in China, EU, Korea and Japan at the band ${\times}$ (3.3 - 3.8GHz. The measured 6-dB impedance bandwidths of the proposed antennas are larger than 700 MHz with isolation between the feeding ports higher than 18 dB [1-2]. The simulation and measurement results show that the proposed antenna concept is a very promising alternative for 5G mobile applications.

• 전자공학회논문지
• /
• 제50권4호
• /
• pp.3-8
• /
• 2013

최근 들어 CDMA 기반 시스템에서 고속 데이터 서비스 지원을 위한 수신 성능 개선 방법의 하나로 칩 단위에서 동작하는 선형 최소 평균 제곱 오차(LMMSE: linear minimum mean-squared error) 수신기에 대한 연구가 활발히 진행되고 있다. 본 논문에서는 D-TxAA (dual stream transmit antenna array) 방식을 사용하는 단일 스트림(single stream) HSDPA MIMO 시스템에서 선부호화 계수(precoding weight) 적용이 LMMSE 수신기의 성능에 미치는 영향을 분석하고자 한다. 우선 D-TxAA 기반 $2{\times}2$ 다중입력 다중출력(MIMO: multiple input multiple output) 시스템에서 수신 신호 순간 파워 (instantaneous power)의 총 합이 최대가 되도록 하는 선부호화 계수 결정 방식을 유도할 것이다. 또한 선부호화 계수의 적용 지연 시간과 단말의 이동 속도가 LMMSE 수신기의 성능에 미치는 영향을 분석하고, 컴퓨터 모의실험을 통해 검증하고자 한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권2호
• /
• pp.702-721
• /
• 2012

In the DVB-T2 system with a multiple-input single-output (MISO) transmission mode, Alamouti coded orthogonal frequency division multiplexing (OFDM) signals are transmitted simultaneously from two spatially separated transmitters in a single frequency network (SFN). In such systems, each transmit-receive link may have a distinct carrier frequency offset (CFO) due to the Doppler shift and/or frequency mismatch between the local oscillators. Thus, the received signal experiences dual CFOs. This not only causes dual phase errors in desired data but also introduces inter-carrier interference (ICI), which cannot be removed completely by simply performing a CFO compensation. To overcome this problem, this paper proposes an iterative detection with dual phase errors compensation technique. In addition, we propose a successive-iterative ICI cancellation technique. This technique successively eliminates ICI in the initial iteration by exploiting pre-detected data pairs. Then, in subsequent iterations, it performs a fine interference cancellation using a priori information, iteratively fed back from the channel decoder. In contrast to previous works, the proposed techniques do not require estimates of dual CFOs. Their performances are evaluated via a full DVB-T2 simulator. Simulation results show that the DVB-T2 receiver equipped with the proposed dual phase errors compensation and the successive-iterative ICI cancellation techniques achieves almost the same performance as ideal dual CFOs-free systems, even for large dual CFOs.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권8호
• /
• pp.3054-3067
• /
• 2015

The phenomena of higher channel cross polarization discrimination (XPD) is mainly observed for future wireless technologies such as small cell network and massive multiple-input multiple-output (MIMO) system. Therefore, utilization of high XPD is very important and space-polarization division multiple access (SPDMA) with dual-polarized MIMO system could be a suitable solution to high-speed transmission in high XPD environment as well as reduction of array size at base station (BS). By SPDMA with dual-polarized MIMO system, two parallel data signals can be transmitted by both vertically and horizontally polarized antennas to serve different mobile stations (MSs) simultaneously compare to conventional space division multiple access (SDMA) with single-polarized MIMO system. This paper analyzes the performance of SPDMA for maximum ratio transmission (MRT) in time division duplexing (TDD) system by proposed dual-polarized MIMO spatial channel model (SCM) compare to conventional SDMA. Simulation results indicate that how SPDMA utilizes the high XPD as the number of MS increases and SPDMA performs very close to conventional SDMA for same number of antenna elements but half size of the array at BS.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권5호
• /
• pp.2063-2081
• /
• 2018

A resource allocation algorithm is proposed in this paper to simultaneously minimize the total system power consumption and maximize the system throughput for the downlink of multi-user multiple input multiple output-orthogonal frequency division multiplexing (MIMO-OFDM) systems. With the Lagrange dual decomposition method, we transform the original problem to its convex dual problem and prove that the duality gap between the two problems is zero, which means the optimal solution of the original problem can be obtained by solving its dual problem. Then, we use convex optimization method to solve the dual problem and utilize bisection method to obtain the optimal dual variable. The numerical results show that the proposed algorithm is superior to traditional single-objective optimization method in both the system throughput and the system energy consumption.

• 조명전기설비학회논문지
• /
• 제22권8호
• /
• pp.52-58
• /
• 2008

본 논문에서는 2.4[GHz]/5.8[GHz] 대역의 이중대역 스위치 설계에 대하여 논한다. 이 스위치는 TDD시스템에 적용 가능하며, 광대역 특성을 개선할 수 있는 새로운 구조를 제안하고 시뮬레이션을 통해 최적의 구조로 설계하였다. 2.4[GHz]/5.8[GHz] 이중대역 스위치는 현재 상용화되고 있는 802.11a/b/g 시스템에 응용할 수 있는 광대역, 고출력, 높은 격리도를 갖는 구조를 연구하였다. 스위치의 송신부는 2개의 FET를 스택 구조로 병렬 스위칭 소자로 동작하도록 설계하였다. 수신부는 기본적인 직/병렬 FET에 추가로 직렬 FET를 삽입한 비대칭 구조를 갖도록 수신부를 설계하였다. SPDT(Single Pole Double Throw) Tx/Rx FET 스위치는 하나의 입력에 2개의 출력으로 스위칭할 수 있는 장치이다. 이 제작된 스위치는 삽입손실 특성은 DC$\sim$6[GHz]까지 3[dB]보다 낮으며 수신경로의 격리도는 -30[dB]이하의 특성을 가지고 있다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.289-292
• /
• 2007

The modular line-connected photovoltaic PCS (power conditioning system) is proposed. The proposed system consists of a step-up DC-DC converter and a full-bridge inverter. A step-up DC-DC converter using a dual series-resonant rectifier circuit and a active-clamp circuit is proposed to achieve a high efficiency and a high input-output voltage ratio efficiently. An IncCond (incremental conductance) MPPT (maximum power point tracking) algorithm that improves MPPT characteristic is used. By control a inverter using a linearized output current controller, a unity power factor is achieved. All algorithms and controllers are implemented on a single-chip microcontroller and the superiority of the proposed algorithms and controllers is proved by experiments.