• 제목/요약/키워드: Dual band amplifier

검색결과 69건 처리시간 0.031초

Tunable 매칭 회로를 적용한 RFID 리더용 Dual Band LNA 설계 (A Design of Dual Band LNA for RFID reader Using Tunable Matching Circuit)

  • 오재욱;임태서;최진규;김형석
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2007년도 학술대회
    • /
    • pp.3-6
    • /
    • 2007
  • In this paper, a hybrid dual band LNA(Low Noise Amplifier) with a tunable matching circuit using varactor is designed for 433MHz and 912MHz RFID reader. The operating frequency is controlled by the bias voltage applied to the varactor. The measured results demonstrate that S21 parameter is 16.01dB and 10.72dB at 433MHz and 912MHz, respectively with a power consumption of 19.36mW. The S11 are -11.88dB and -3.31dB, the S22 are -11.18dB and -15.02dB at the same frequencies. The measured NF (Noise Figure) is 15.96dB and 7.21dB at 433MHz and 912MHz, respectively. The NF had poorer performance than the simulation results. The reason for this discrepancy was thought that the input matching is not performed exactly and a varactor in the input matching circuit degrades the NF characteristics.

  • PDF

부분방전 모니터링 시스템을 위한 광대역 RF 소자설계 연구 (Design of Broad Band RF Components for Partial Discharge Monitoring System)

  • 이제광;고재형;김군태;김형석
    • 전기학회논문지
    • /
    • 제60권12호
    • /
    • pp.2286-2292
    • /
    • 2011
  • In this paper we present the design of Low Noise Amplifier(LNA), mixer and filter for RF front-end part of partial discharge monitoring system. The monitoring system of partial discharge in high voltage power machinery is used to prevent many kinds of industrial accidents, and is usually composed of three parts - sensor, RF front-end and digital microcontroller unit. In our study, LNA, mixer and filter are key components of the RF front-end. The LNA consists of common gate and common source-cascaded structure and uses the resistive feedback for broad band matching. A coupled line structure is utilized to implement the filter, of which size is reduced by the meander structure. The mixer is designed using dual gate structure for high isolation between RF and local oscillator signal.

Gysel 전력결합기를 이용한 고출력 X-band SSPA 설계 (High power X-band SSPA Design using Gysel Power Combiner)

  • 이상록;임은재;이영철
    • 한국전자통신학회논문지
    • /
    • 제9권4호
    • /
    • pp.425-432
    • /
    • 2014
  • 산악지형이 많은 한국 실정에서 국지적으로 발생하는 기상자료를 제공하기 위하여 진공관식 레이더 보다는 반도체를 이용한 소형의 X-band 기상레이더의 필요성이 요구되고 있다. 기상레이더의 이중 편파방식에 사용되는 반도체형 전력증폭기(SSPA)는 다수의 소출력 전력소자를 병렬로 결합함으로써 원하는 고출력을 얻을 수 있다. 이와 같이 고출력 전력증폭기에 적용되는 전력결합기는 경로손실, 고주파수, 고출력에 따른 안정저항의 문제, 열방출 특성을 해결하기 위하여 본 논문에서는 변형된 Gysel 전력결합기를 적용한 결과 격리도(isolation)의 우수성을 제시하였으며, 최대출력 54dBm, 25%의 효율을 갖는 기상레이더용 X-band 250W 급 반도체형 전력증폭기를 설계하였다.

L1/L2 이중-밴드 GPS 수신기용 RF 전단부 설계 (Design of the RF Front-end for L1/L2 Dual-Band GPS Receiver)

  • 김현덕;오태수;전재완;김성균;김병성
    • 한국전자파학회논문지
    • /
    • 제21권10호
    • /
    • pp.1169-1176
    • /
    • 2010
  • 본 논문에서는 L1/L2 이중-밴드 GPS(Global Positioning System) 수신기용 RF 전단부를 설계하였다. 수신기는 Low IF 구조이며, 인덕터를 사용하지 않는 광대역 저잡음 증폭기(Low Noise Amplifier: LNA)와 이미지 제거를 위하여 다상 여과기(poly-phase filter)를 포함하는 quadrature 하향 변환 주파수 혼합기(quadrature down-conversion mixer) 및 전류 모드 논리(Current Mode Logic: CML) 주파수 분배기로 구성되어 있다. 저잡음 증폭기와 이미지 제거 주파수 혼합기는 높은 이득과 헤드룸 문제를 해결하기 위하여 전류 블리딩 기술을 이용하였으며, 광대역 입력 정합을 구현하기 위하여 공통 드레인 피드백을 이용하였다. $0.18{\mu}m$ CMOS 공정을 이용해 제작된 RF 전단부는 L1 밴드에서 38 dB 그리고 L2 밴드에서 41 dB의 이득을 보이며, IIP3는 L1 밴드에서 -29 dBm, L2 밴드에서는 -33 dBm이다. 입력 정합은 50 MHz에서 3 GHz까지 -10 dB 이하를 만족하며, 잡음 지수(Noise Figure: NF)는 L1 밴드에서는 3.81dB, L2 밴드에서는 3.71 dB를 보인다. 이미지 주파수 제거율은 36.5 dB이다. 설계된 RF 전단부의 칩 사이즈는 $1.2{\times}1.35mm^2$이다.

CDMA방식의 이중대역 전력증폭기의 설계 및 제작 (Design and implementation of dual band power amplifier for 800MHz CDMA and PCS handset)

  • 윤기호;유태훈;유재호;박한규
    • 한국통신학회논문지
    • /
    • 제22권12호
    • /
    • pp.2674-2685
    • /
    • 1997
  • 본 논문에서는 국내향 800MHz CDMA 와 PCS(CDMA 방식)에서 동시에 사용될 수 있는 이동통신 전화기의 핵심부품인 이중대역 전력증폭기 모듈에 대한 연구를 기술하였다. CDMA 방식의 전화기가 갖는 사용빈도가 가장 높은 출력(1O-15dBm)이 선형영역인점을 고려하여 종단전력증폭용 GaAs FET의 DC 동작점을 B급으로 제한하므로서 배터리 사용시간을 연장하였다. 따라서 낮은 동작점에서도 우수한 선형성을 가진 2개의 Plastic GaAS FET로서 모듈을 구현하였고 입출력단에 주파수 분리회로를 설계하여 2개의 주파수 대역을 사용할수 있게 하였다. 모듈의 소형화를 위해 다층기판을 사용하였으며 협소한 전송선로간의 전자기결합과 가판 각 층간의 via hole 등은 전자기 해석을 통해 회로 설계에 반영하였다. 모듈 전체 크기는 O.96CC($22{\times}14.5{\times}3mm^3$) 이고 출력 10~l5dBm에서 모듈 총전류는 130mA이다. 선형특성은 출력 28dBm(CDMA, 800MHz)와 23.5dBm(PCS)에서 IS-95에서 규정하는 ACPR(Adjacent Channel Power Rejection)보다 2-3dB 여유도를 가진다.

  • PDF

Varactor를 이용한 RFID 이증 대역 LNA 설계 (A Design of Dual Band LNA for RFID Using Varactor Diode)

  • 최진규;고재형;장세욱;김형석
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 Techno-Fair 및 합동춘계학술대회 논문집 전기물성,응용부문
    • /
    • pp.151-152
    • /
    • 2008
  • In this paper, a dual band LNA (Low Noise Amplifier) with a matching circuit using varactor diode is designed for 912MHz and 2450MHz RFID system. The operating frequency is controlled by the bias voltage applied to the varactor diode. The measured results demonstrate that gain is 13.6dB and 6.8dB at 912MHz and 2450MHz. The measured NF (Noise Figure) is 1.4dB and 3.1dB at 912MHz and 2450MHz, respectively.

  • PDF

L1/L5 밴드 GPS/Galileo 수신기를 위한 $0.13{\mu}m$ 3.6/4.8 mW CMOS RF 수신 회로 (A 3.6/4.8 mW L1/L5 Dual-band RF Front-end for GPS/Galileo Receiver in $0.13{\mu}m$ CMOS Technology)

  • 이형수;조상현;고진호;남일구
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2008년도 하계종합학술대회
    • /
    • pp.421-422
    • /
    • 2008
  • In this paper, CMOS RF front-end circuits for an L1/L5 dual-band global positioning system (GPS)/Galileo receiver are designed in $0.13\;{\mu}m$ CMOS technology. The RF front-end circuits are composed of an RF single-to-differential low noise amplifier, an RF polyphase filter, two down-conversion mixers, two transimpedance amplifiers, a IF polyphase filter, four de-coupling capacitors. The CMOS RF front-end circuits provide gains of 43 dB and 44 dB, noise figures of 4 dB and 3 dB and consume 3.6 mW and 4.8 mW from 1.2 V supply voltage for L1 and L5, respectively.

  • PDF

두 개의 통과대역을 갖는 위성 중계기용 이중모드 정규(Canonical) 구조 필터 (A Dual-Mode Canonical Filter with Dual-Passband for Satellite Transponder)

  • 이주섭;엄만석;염인복;박종흥
    • 한국전자파학회논문지
    • /
    • 제15권3호
    • /
    • pp.278-283
    • /
    • 2004
  • 위성통신에서 있어서 주파수 할당 및 빔 커버리지가 다양해지고 복잡해짐에 따라 주파수상에서 인접하지 않은 여러 개의 채널 신호가 하나의 고출력 증폭기에 의해서 증폭되어져 안테나를 통하여 지상으로 송출되는 경우가 있다. 본 논문에서는, 이러한 위성통신 시스템에 적용이 가능한 두 개의 통과대역을 갖는 위성 중계기용 이중모드 정규(canonical) 구조 필터를 제시하였다. 필터의 무게와 부피를 줄이기 위하여 이중모드 설계기법을 사용하였으며, 최대한 많은 수의 전달영점 구현이 가능한 정규 구조로 필터를 설계하였다. 두 개의 통과대역을 갖는 Ka대역 위성 중계기용(30/20 ㎓) 6차 이중모드 정규 구조 필터의 구현을 통하여 설계기법을 검증하였다.

LTCC를 이용한 Small Size Dual Band PAM의 구현 (Implementation of Small Size Dual Band PAM using LTCC Substrates)

  • 신용길;정현철;이중근;김동수;유찬세;유명재;박성대;이우성
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
    • /
    • pp.357-358
    • /
    • 2005
  • Compact power amplifier modules (PAM) for WCDMA/KPCS and GSM/WCDMA dual-band applications based on multilayer low temperature co-fired ceramic (LTCC) substrates are presented in this paper. The proposed modules are composed of an InGaP/GaAs HBT PAs on top of the LTCC substrates and passive components such as RF chokes and capacitors which are embedded in the substrates. The overall size of the modules is less than 6mm $\times$ 6mm $\times$ 0.8mm. The measured result shows that the PAM delivers a power of 28 dBm with a power added efficiency (PAE) of more than 30 % at KPCS band. The adjacent-channel power ratio (ACPR) at 1.25-MHz and 2.25-MHz offset is -44dBc/30kHz and -60dBc/30kHz, respectively, at 28-dBm output power. Also, the PAM for WCDMA band exhibits an output power of 27 dBm and 32-dB gain at 1.95 GHz with a 3.4-V supply. The adjacent-channel leakage ratio (ACLR) at 5-MHz and 10-MHz offset is -37.5dBc/3.84MHz and -48dBc/3.84MHz, respectively. The measured result of the GSM PAM shows an output power of 33.4 dBm and a power gain of 30.4 dB at 900MHz with a 3.5V supply. The corresponding power added efficiency (PAE) is more than 52.6 %.

  • PDF

곡면에 부착 가능한 GPS/GLONASS 마이크로스트립 능동 안테나 (GPS/GLONASS Microstrip Active Antenna Apply to Curve Surface)

  • 김미숙;손석보;주한기;배준성;김준오
    • 한국군사과학기술학회지
    • /
    • 제14권1호
    • /
    • pp.1-8
    • /
    • 2011
  • In this paper, dual-feed circularly polarized microstrip patch antenna for GPS L1, GPS L2, GLONASS L1 signal was fabricated by using stacked patch. It was fed by dual coaxial probe on the patch at 50ohm impedance, and was simulated to resonate at GPS L1, GPS L2, GLONASS L1. To realize characteristics of right hand circular polarization using dual-feed stacked patch antenna and hybrid coupler for $90^{\circ}$ phase difference. Output of hybrid coupler was contacted input of Low Noise Amplifier(LNA). The LNA using dual band pass filter was designed and fabricated. The measured results of the implemented antenna is VSWR < 1.5 : 1 and the gain of 32dB(Zenith) over at GPS L1, L2, GLONASS L1.