• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.1
• /
• pp.153-158
• /
• 2009

Stable and tunable dual-wavelength erbium-doped fiber ring laser(EDFL) using a single fiber Bragg grating(FBG) and two coil heaters is proposed and demonstrated. Installing two identical coils into a single FBG, the FBG is symmetrically divided into two different portions. While a current supply to the coil, the refractive index of the FBG under the coil is changed. The FBG can operate as a joint of two different FBGs. Due to the thermo-optic effect of a fiber, the resonance wavelength split into two peaks. The spacing between two adjacent channels was changed as much as the difference of heating power. It was tuned up to 3 nm of wavelength under the electrical power with a 1000 mW. Moreover, the lasing wavelength can be individually tuned without influencing to the adjacent channel.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.535-542
• /
• 2002

This paper show communication network scheme problem for the railway is solved which were electrical noise and line break in wayside using rerouting communication line, Considering the availability and the maintainability based on the reliability in design of communication networks. At first, Self-Healing Ring algorithm is suggested in that solution which is satisfied with above requirements. And also, in the advanced type, Dual Master scheme is suggested that the problem which is occurred in line break of both main and sub line at the same time can be solved using DMSHR(Dual Master Self Healing Ring). Therefore total reliability in railway system is going to be advanced using DMSHR scheme.

• Bulletin of the Korean Mathematical Society
• /
• v.60 no.3
• /
• pp.829-844
• /
• 2023

In this paper, we present a new construction for self-dual codes that uses the concept of double bordered construction, group rings, and reverse circulant matrices. Using groups of orders 2, 3, 4, and 5, and by applying the construction over the binary field and the ring F₂ + uF₂, we obtain extremal binary self-dual codes of various lengths: 12, 16, 20, 24, 32, 40, and 48. In particular, we show the significance of this new construction by constructing the unique Extended Binary Golay Code [24, 12, 8] and the unique Extended Quadratic Residue [48, 24, 12] Type II linear block code. Moreover, we strengthen the existing relationship between units and non-units with the self-dual codes presented in [10] by limiting the conditions given in the corollary. Additionally, we establish a relationship between idempotent and self-dual codes, which is done for the first time in the literature.

• The KIPS Transactions:PartA
• /
• v.8A no.4
• /
• pp.419-428
• /
• 2001

Advances in circuit and integration technology are continuously boosting the speed of processors. One of the main challenges presented by such developments is the effective use of powerful processors in shared memory multiprocessor system. We believe that the interconnection problem is not solved even for small scale shared memory multiprocessor, since the speed of shared buses is unlikely to keep up with the bandwidth requirements of new powerful processors. In the past few years, point-to-point unidirectional connection have emerged as a very promising interconnection technology. The single slotted ring is the simplest form point-to-point interconnection. The main limitation of the single slotted ring architecture is that latency of access increase linearly with the number of the processors in the ring. Because of this, we proposed the dual slotted ring as an alternative to single slotted ring for cache-based multiprocessor system. In this paper, we analyze the proposed dual slotted ring architecture using new snooping protocol and enforce simulation to compare it with single slotted ring.

• Korean Journal of Mathematics
• /
• v.24 no.4
• /
• pp.751-764
• /
• 2016

We investigate the self-dual codes over Galois rings and determine the mass formula for self-dual codes over Galois rings $GR(p^2,2)$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.2
• /
• pp.129-134
• /
• 2009

In this paper, we proposed a miniaturized Balun-BPF structure using semi-lumped line The conventional Ring Balun-BPF relatively has a big size structure because they consist of two ring resonators, wide line width ring-resonators for low loss and $\lambda/4$transmission line inverters. The ring resonators are miniaturized to 1/4 size by semi-lumped line and we added triangle patches in the ring resonator for compact Balun-BPF structure. The fabricated Balun-BPF is miniaturized to 1/4 size and contains symmetrical output characteristics of balance ports.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.9
• /
• pp.503-513
• /
• 2002

Since CC-NUMA architecture has to access remote memory, the interconnection network determines the performance of the CC-NUMA system. Bus which has been used as a popular interconnection network has many limits in a large-scale system because of the limited physical scalability and bandwidth. The dual ring interconnection network, composed of high-speed point-to-point links, is made to resolve the defects of the bus for the large-scale system. However, it also has a problem, in that the response latency is rapidly increased when many nodes are attached to the snooping based CC-NUMA system with the dual ring. In this paper, we propose a ring architecture with repeater nodes in order to overcome the problem of the dual ring on a snooping based CC-NUMA system, and design a repeater node adapted to this architecture. We will also analyze the effects of proposed architecture on the system performance and the response latency by using a probability-driven simulator.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2526-2533
• /
• 2015

In this paper, a design method for a compact dual-band coplanar waveguide-fed slot antenna using SRR(split-ring resonator) conductor is studied. The SRR conductor is loaded inside a rectangular slot of the proposed antenna for dual-band operation. When the SRR conductor is inserted into the slot, the original rectangular slot is divided into a rectangular loop region and a rectangular slot region, and frequency bands are created by the loop and slot, separately. A prototype of the proposed dual-band slot antenna operating at 2.45 GHz WLAN band and 3.40-5.35 GHz band is fabricated on an FR4 substrate with a dimension of 30 mm by 30 mm. Experiment results show that the antenna has a desired impedance characteristic with a frequency band of 2.38-2.51 GHz and 3.32-5.38 GHz for a voltage standing wave < 2, and measured gain is 1.7 dBi at 2.45 GHz, and it ranges 2.4-3.2 dBi in the second band.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2265-2272
• /
• 2013

In this paper, a dual-band circular ring monopole antenna with stub and ground slot for is proposed WLAN(Wireless Local Area Networks) applications. The proposed antenna is based on a planar monopole design, and composed of one circular ring of radiating patches, and modified feed line, and rectangular slot in the ground plane for dual-band operation. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and found the parameters that effect antenna characteristics. Using the obtained parameters, the antenna is fabricated, and the return loss coefficient, gain, and radiation patterns are determined for WLAN application.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.245-251
• /
• 2011

In this paper, dual-band bandpass filter by using Pseudo-Interdigital Stepped-Impedance Resonator(PI-SIR) and Open-Loop Ring Resonator(OLRR) is proposed. The first passband and second passband are formed by PI-SIR and the second passband is reinforced by an OLRR. In a PI-SIR the first band and second band are easily and exactly adjusted by characteristic impedance ratio and electrical length ratio. The proposed design method may be confirmed to be useful from fabricated and measured results for dual-band bandpass filter operated at 2.45 GHz and 5.8 GHz.