• 한국공작기계학회논문집
• /
• 제13권2호
• /
• pp.127-132
• /
• 2004

In industrially advanced countries, environmentally conscious machining was eagerly studied because of ecological and economical reasons. As the environmental regulations become stricter, the new machining technologies which take environmental aspects into consideration are being developed. Recently the research institutions have established application method for dry, semi-dry, oil-mist and compressed cold air machining. In this paper the performance of new compressed cold air system for environmentally conscious machining is investigated and machinability of dry and new compressed cold air machining is evaluated. A series of tests are carried out by using measuring equipments in condition of dry and compressed cold air machining.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.792-797
• /
• 2009

The stress-strain characteristics of compacted bentonite are investigated using experimental triaxial compression test by Hoek-cell. Special attention given to various dry density and water absorption ratio. Based on the test results, it is shown that the stress-strain relationship of compacted bentonite is highly influenced by dry density and water absorption ratio. Also, characteristics of Bentonite is similar to the clay rather than sand. Strength of compressed Bentonite increases with higher dry density. It shows maximum strength value, if in a same condition with dry density and constrain pressure. So we determine that value as the optimistic moisture contents for the maximun strength of compressed Bentonite.

• 한국진공학회지
• /
• 제19권4호
• /
• pp.265-274
• /
• 2010

반도체소자 및 디스플레이 제조공정의 핵심 환경인 진공을 형성 유지하기 위한 건식진공펌프는 높은 성능과 신뢰성을 필요로 한다. 건식진공펌프의 개발을 위해서는 다양한 고려와 세밀한 기술적 검토가 필요하다. 본고에서는 반도체 및 디스플레이 제조 공정용 건식진공펌프 개발 과정을 단계별로 소개하고 향후 기술발전 방향에 대해 소개하고자 한다.

• 한국식품저장유통학회지
• /
• 제4권1호
• /
• pp.33-38
• /
• 1997

In order to provide informations for designing packaging and storage condition of dry jujube (Zizyphus jujuba MILLER), moisture sorption isotherm was determined for temperatures of 20, 30 and 4$0^{\circ}C$, and quality changes were evaluated as function of temperature and water activity. Dry jujube at a given water activity showed higher equilibrium moisture content for lower temperature. Moisture isothem could be fitted by GAB model equation, giving higher C value, lower m0 and relatively constant k value with increase in temperature. Ascorbic acid was lost more highly at higher temperature and water activity, and showed negligible retention for whole range of water activity and temperature studied after 141 days. Browning increased with water activity up to 0.73 at 30 and 4$0^{\circ}C$. Dry jujube of high water activity had high L value in surface color, which represent brightness of surface color. Considering quality retention in the storage, dry jujube is desired to be dried to water activity of 0.42 and be stored at temperature below 3$0^{\circ}C$

• 열처리공학회지
• /
• 제27권2호
• /
• pp.65-71
• /
• 2014

SMF9060 material is a Fe-based powder sintered alloy that is used for several automobile components such as Synchronize Hub, oil pump and transmission. These components are required excellent wear resistance and durability. In this study, we have performed a dry wear test at the ambient air and Ar gas conditions in the room temperature, and a lubricant wear test at the room temperature and engine oil temperature of $100^{\circ}C$. The amount of wear volume and coefficient friction are measured by a Profilometer and a Ball on disk type wear tester. The wear volume in Ar gas condition was a little higher than that in the ambient air condition. However the wear volume in the lubricant wear condition was much lower than in the dry wear condition. XRD analysis of the debris in Ar gas condition showed that the oxide film was not formed.

• 한국포장학회지
• /
• 제23권1호
• /
• pp.27-36
• /
• 2017

오리엔탈 나리 '시베리아'의 건식저장 기간에 따른 절화 보존 시 수분함량 변화와 절화수명을 구명하고자 하였다. 본 실험에서 저장 기간에 따라 저온 저장($5^{\circ}C$)을 한 다음 절화수명에 관계된 수분 및 품질 변화와 개화 정도를 검토하여 '시베리아' 나리의 절화 수확 후 관리 기술에 관계된 기본적인 자료를 얻고자 하였다. '시베리아' 나리를 채화하여 저온에서 건식저장 기간에 따라 3일, 6일, 12일한 후 절화보존 동안에 생체중 변화, 수분균형, 개화정도 등을 조사하였으며 대조구로서 상온 건식저장과 비교하였다. 저온 건식저장 후에 '시베리아' 나리의 수분함량은 건식저장 기간에 영향을 받아 저장하는 기간이 짧을수록 높아져 저장 3일이 다른 처리구보다 높아지는 경향을 보였다. 꽃의 수분함량은 절화보존 시 지속적으로 증가하는데, 저장 기간이 짧을수록 수분이 높게 유지되었다. 생체중 변화는 건식저장 기간에 영향을 받아 저장 기간이 짧았던 것에서 생체중의 증가 정도가 컸으며 음(-)의 값에 이르는 기간이 늦어지는 것으로 나타났다. 또한 절화보존 시 생체중 변화는 저온 건식저장 3일이 생체중 증가 정도가 완만하게 변하며 수분균형도 8일째에 음(-)의 값에 도달하는 것으로 나타났다. 그러나 저장 온도 차이에 따른 생체중 변화는 상온에서 저장한 절화가 저온저장보다 증감 정도가 더 빠른 것으로 나타났다. 개화정도는 '시베리아' 나리의 건식저장 기간이 길어질수록 개화시기가 빨라지며, 절화가 빨리 시들어 상품으로써 유지 기간이 짧아졌다. 개화상태를 비교해 보면 3일 저온 건식저장이 다른 처리보다 개화하는 속도가 늦었으나 절화수명은 다른 처리구보다 길게 나타났다. '시베리아' 나리의 저온 건식저장은 저장 기간이 짧을수록 저장 후 수분함량이 높고 수분 균형값이 음(-)에 늦게 도달하였으며 개화상태가 좋고 절화수명도 길어지는 것으로 나타났다. '시베리아' 나리는 건식저장을 통한 작물체내 수분 함량 감소가 절화보존 시 개화 특성에도 영향을 미쳐 저장기간이 길수록 절화수명이 감소하여 상품 가치를 떨어뜨렸다. '시베리아' 나리 절화를 소비자가 이용 시, 상품 가치 유지를 위해서는 기존 결과의 6일 동안 저온 건식저장도 절화수명을 단축시키므로 저장 기간을 최소화하는 것이 절화 품질 유지를 위해 바람직하다고 판단된다.

• 대기
• /
• 제20권4호
• /
• pp.399-414
• /
• 2010

Sand and dust storm in East Asia, so called Asian dust, is a seasonal meteorological phenomenon. Mostly in spring, dust particles blown into atmosphere in the arid area over northern China desert and Manchuria are transported to East Asia by prevailing flows. An Asian dust event occurred on 6-8 May 2007 is chosen to investigate how sensitive the Asian dust transport forecast to the initial condition uncertainties and to interpret the characteristics of sensitivity structures from the viewpoint of dynamics and predictability. To investigate the forecast sensitivities to the initial condition, adjoint sensitivities that calculate gradient of the forecast aspect (i.e., response function) with respect to the initial condition are used. The forecast aspects relevant to Asian dust transports are dry energy forecast error and lower tropospheric pressure forecast error. The results show that the sensitive regions for the dry energy forecast error and the lower tropospheric pressure forecast error are initially located in the vicinity of the trough and then propagate eastward as the surface low system moves eastward. The vertical structures of the adjoint sensitivities for the dry energy forecast error are upshear tilted structures, which are typical adjoint sensitivity structures for extratropical cyclones. Energy distribution of singular vectors also show very similar structures with the adjoint sensitivities for the dry energy forecast error. The adjoint sensitivities of the lower tropospheric pressure forecast error with respect to the relative vorticity show that the accurate forecast of the trough (or relative vorticity) location and intensity is essential to have better forecasts of the Asian dust event. Forecast error for the atmospheric circulation during the dust event is reduced 62.8% by extracting properly weighted adjoint sensitivity perturbations from the initial state. Linearity assumption holds generally well for this case. Dynamics of the Asian dust transport is closely associated with predictability of it, and the improvement in the overall forecast by the adjoint sensitivity perturbations implies that adjoint sensitivities would be beneficial in improving the forecast of Asian dust events.

• 한국지반신소재학회논문집
• /
• 제10권4호
• /
• pp.113-121
• /
• 2011

지중송전관로의 되메움재로는 보통 강모래를 사용하고 있다. 그러나 강모래의 열저항률은 습윤시 $150^{\circ}C$-cm/Watt 정도이고 건조시에는 이보다 2배 이상의 값을 나타낸다. 연구의 최종목표는 함수비 변화에 따라 열저항률의 변화가 작은 재료(습윤시 열저항률 $50^{\circ}C$-cm/Watt, 건조시 열저항률 $100^{\circ}C$-cm/Watt를 목표로 함)의 개발이나, 이 연구에서는 강모래를 포함한 각종 되메움재 후보군에 대하여 함수비, 건조단위중량, 입도분포 등의 차이에 따른 열저항 특성을 탐침법에 의해 조사하고, 시험결과를 비교 분석하였다. 분석 결과, 열저항 특성은 단위중량의 변화, 건조상태의 경우 최적함수비의 상태를 그대로 대기 중에 건조시킨 경우와 최초의 건조 상태에서의 열저항률의 차이 등을 고려하여야 하는 것으로 나타났다. 또한 최대밀도가 되도록 입도분포가 개선된 혼합재료는 원재료에 비해 열저항률을 크게 낮출 수 있는 것으로 나타났다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2003년도 제10차 국제학술회의 및 추계정기 학술발표회
• /
• pp.40-42
• /
• 2003

In order to examine the possibility that oil seed rape could be used as a forage fodder crop and to select the most suitable variety of forage rape at the southern area of Korea, two varieties of oil seed rape currently grown for oil production and six introduced varieties of forage rape with relatively high yield and high nutritional value were grown at the same condition and yield components were observed. Forage rape was superior to oil seed rape in terms of yield components, plant fresh weight and plant dry mater weight. Velox was superior to any other variety of forage rape in these characters. When plant dry matter weight of the rape was subdivided into four components such as a main stem, branch stems, main stem leaves and branch leaves, contribution of these components to plant dry matter weight was in the order of branch stems, branch leaves, the main stem and main stem leaves. Dry matter percentage of the rape ranged from 9.32 to 11.08 percent, which was somewhat low value. There was no significant difference between two groups of the rape in terms of dry matter percentage. Velox showed somewhat higher value in dry matter percentage.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.343-347
• /
• 2004

High oxidation temperature of SiC shows a tendency of carbide formation at the interface which results in poor MOSFET transfer characteristics. Thus we developed oxidation processes in order to get low interface charge densities. N-type 6H-SiC MOS capacitors were fabricated by different oxidation processes: dry, wet, and dry­reoxidation. Gate oxidation and Ar anneal temperature was $1150^{\circ}C.$ Ar annealing was performed after gate oxidation for 30 minutes. Dry-reoxidation condition was $950^{\circ}C,$ H2O ambient for 2 hours. Gate oxide thickness of dry, wet and dry-reoxidation samples were 38.0 nm, 38.7 nm, 38.5 nm, respectively. Mo was adopted for gate electrode. To investigate quality of these gate oxide films, high frequency C- V measurement, gate oxide leakage current, and interface trapped charge densities (Dit) were measured. The interface trapped charge densities (Dit) measured by conductance method was about $4\times10^{10}[cm^{-1}eV^{-1}]$ for dry and wet oxidation, the lowest ever reported, and $1\times10^{11}[cm^{-1}eV^{-1}]$ for dry-reoxidation