• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.429-433
• /
• 2007

Cement mortar and concrete can be used as grouts but problems regarding shrinkage and the discord of coefficients of thermal expansion between grouts and HDPE pipes has to be solved. Thermal conductivities of wet condition two times larger than those of dry condition, except for pure cement mortar. The addition of sand into the cement grouts greatly increases the thermal conductivity. The addition of bentonite into the cement grouts reduces thermal conductivity thus reducing the density. Bentonite grouting must be used only below the groundwater table since bentonite grouts possesses high shrinkage property in dry condition. The addition of sand prevents the shrinkage of bentonite grouts. Bentonite manufactured in Korea can be used since they possess similar thermal conductivities with imported products. The addition of sand into the bentonite grouts greatly increases the thermal conductivity.

• Composites Research
• /
• 제33권5호
• /
• pp.275-281
• /
• 2020

본 논문에서는 항공기 팬 블레이드에 적용되는 복합재와 금속 간의 접합 구조물에 대한 온도, 습도에 따른 접착제의 물성 변화에 관해 연구하였다. 항공기 운용 시 노출되는 환경 조건을 고려하여 상온 건조(Room Temperature Dry, RTD), 고온 흡습(Evaluated Temperature Wet, ETW), 저온 건조(Cold Temperature Dry, CTD) 세가지 환경에서 강도 시험을 수행하였다. 접착전단강도 시험은 ASTM D3528을 기준으로 수행하였고, 파손 영역에 대한 마이크로 구조 특성을 SEM이미지를 통해 분석하였다. 연구 결과에 따르면 RTD 환경에서의 전단강도 대비하여 ETW 환경에서 72.8% 저하되었으며, CTD 환경에서는 56.5% 증가되었다. 이는 고온 및 수분 흡습이 접착제의 기계적 특성에 큰 영향을 미치는 것을 확인했고, 저온 환경에서는 모재와 접착제 모두 취성의 증가로 인해 접착 전단 강도가 향상된 것으로 분석되었다.

• 한국패류학회지
• /
• 제15권1호
• /
• pp.57-62
• /
• 1999

Condition index(Cl)는 일반적으로 이매패류의 영양상태와 건강 등의 생리적인 상태를 알기 위한 중요한 지수이다. 이 연구는 제주도 추자 연안에 서식하는 홍합(M.coruscus)의 Cl를 다음과 같은 세 가지 방법으로 산출한 뒤, 이를 비교하였다: (1) Cl-vol=[tissue dry weight(g) 1000]shell cavity volume(ml). (2) Cl-wt=[tissue dry weight(g) 1000]internal shell cavith capacity(g). (3) Cl-size= tissue wet weight(g)/[shell length (mm)]$^{3}$. Cl-vol 산정을 위한 패각내 부피는 아르키메데스의 원리를 이용하였으며, 전체 부피와 육질을 제거한 패각의 부피 차를 이용하여 산출하였다. 월 별 세 가지 Ci들의 변화는 Pearson의 상관계수, 분산분석(ANOVA)과 Duncan의 다중검정법을 사용하여 세 지수의 유의성과 처리평균간의 근사 정도를 검정하였다. 실험에 이용된 홍합의 크기는 각장 50-180 mm 이었다. 세 지수의 범위는 67.48-140.61(CL-vol), 74.67-118.02(Cl-wt), 1.40$^{-5}$-1.60$^{-5}$(Cl-size)였다. Cl-vol은 Cl-wt, Cl-size와는 다르게 계절에 따른 유의차를 보였으며(p<0.05) 8월에 가장 높은 수치를 보였다. 그러므로 패각내 부피를 이용한 Cl는 홍합의 상태를 제시하는데 있어 가장 효율적인 것으로 사료된다.

• 한국지반신소재학회논문집
• /
• 제18권1호
• /
• pp.79-89
• /
• 2019

본 연구는 기존의 콘크리트 투수블록이 아닌 재활용 합성수지를 활용하여 제작된 투수블록의 열섬현상 완화의 기능성 측면인 표면온도의 저감효과를 확인하고자 야외계측과 실내실험을 진행하였다. 야외계측은 건조한 상태와 습윤상태를 고려하여 3일 동안 계측하였고, 실내실험은 건조 조건, 강우 모사 조건, 표층 습윤 조건 등으로 구분하여 온도의 변화와 실험 후 함수율의 증발비율을 확인하였다. 야외계측 결과, 가뭄이 지속되거나 일정수준의 수분이 표층에 없는 건조한 상태에서는 수분의 증발에 의한 기화잠열로 냉각효과가 발휘되기 보다는 투수블록 표면의 알베도에 의한 차이로 표면의 온도가 감소하는 것을 확인하였다. 실내실험 결과, 재생 합성수지 투수블록(RS 투수블록)은 콘크리트 투수블록보다 건조한 상태일때는 더 높은 표면온도를 기록하였으나 강우 모사조건에서는 공극내 수분의 증발이 모세관력에 의해 지속적으로 유지되어 더 높은 온도 저감율 보이는 것으로 나타났다. 실내실험 후 증발율을 측정한 결과 수분의 증발율이 높을수록 온도의 저감효과는 증가하는 것을 확인하였다. 이 결과를 바탕으로 증발율과 온도의 저감율에 대한 상관관계식을 도출하였다.

• 한국농공학회지
• /
• 제12권1호
• /
• pp.1854-1860
• /
• 1970

Results of this study on the influence of percent passing of No. 200 sieve on soil compaction are as follows; 1. The higher maximum dry density of soil is, the lower optimum moisture content is. Maximum dry density is highest value and optimum moisture content is the lowest value in twocases that percents of No. 200 sieve are 30% in soils of which percents retained on No. 10 sieve are 5% and 10% respectively. 2. Maximum dry density increases according as uniformity coefficient increase. Maximum dry density is the highest when uniformity coefficient is approximately 300 in soil of which maximum diameter is 4.76mm. 3. Maximum dry density has a tendency to become large according as value of Cu Caincrease. Correlation between maximum dry density and $Log_{10}$(CuCa) shows straight line. 4. Maximum dry density increases according as n increase and reaches the peak when n equal 0.35 in condition that the index of talbot formula n is less than 0.35 in soil of which maximum diameter is 4.76mm. 5. Maximum dry density has a tendency to increase according as value of Cg $(Cg=\frac{P_{50}^2}{P_{10}{\times}{P_{200}}$) decrease.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권4호
• /
• pp.580-585
• /
• 2016

The objective of this study was to determine cow characteristics and farm management factors during the dry period associated with early postparturient intramammary infection (IMI) and subsequent clinical mastitis (CM). Data were collected three times: before drying off (P1), during the dry period (P2), and 5 to 14 days after calving (P3), using questionnaires and farm investigation. Milk samples were aseptically collected for bacterial identification at P1 and P3. Factors associated with IMI and CM were analyzed using multiple logistic regression models. The final model showed that IMI in early postpartum was significantly associated with full insertion of dry cow antibiotic, dry cows in barns with a combination of tie and free stalls, body condition score (BCS) in dry period and after calving, and milk yield before drying off. For IMI cows, factors significantly associated with clinical expression of mastitis were having daily barn cleaning, teat disinfected with alcohol before administration of dry cow therapy, BCS before drying off, milk yield before drying off, and days in milk at drying off. In conclusion, both cow and farm management factors are associated with the IMI rate and subsequent expression of clinical signs of mastitis in early postpartum cows.

• Nuclear Engineering and Technology
• /
• 제45권1호
• /
• pp.115-124
• /
• 2013

Among the several options to solve PWR spent fuel accumulation problem in Korea, the dry storage method could be the most realistic and applicable solution in the near future. As the basic objectives of dry storage are to prevent a gross rupture of spent fuel during operation and to keep its retrievability until transportation, at the same time the importance of a spent fuel integrity evaluation that can estimate its condition at the final stage of dry storage is very high. According to the national need and technology progress, two representative nations of spent fuel dry storage, the USA and Japan, have established different system temperature criteria, which is the only controllable factor in a dry storage system. However, there are no technical criteria for this evaluation in Korea yet, it is necessary to review the previously well-organized methodologies of advanced countries and to set up our own domestic evaluation direction due to the nation's need for dry storage. To satisfy this necessity, building a domestic spent fuel test database should be the first step. Based on those data, it is highly recommended to compare domestic data range with foreign results, to build our own criteria, and to expand on evaluation work into recently issued integrity problems by using a comprehensive integrity evaluation code.

• Animal Bioscience
• /
• 제34권10호
• /
• pp.1705-1716
• /
• 2021

Objective: This study aimed to elucidate the effects of cooking conditions on the physicochemical and sensory characteristics of dry- and wet-aged beef strip loins. Methods: Dry- and wet-aged beef aged for 28 days were cooked using different cooking methods (grilling or oven roasting)×cooking temperatures (150℃ or 230℃), and their pH, 2-thiobarbituric acid reactive substances (TBARS), volatile compounds, and color were measured. Results: Cooking conditions did not affect pH; however, grilling resulted in lower TBARS but higher cooking doneness at the dry-aged beef surface compared to oven roasting (p<0.05). In descriptive sensory analysis, the roasted flavor of dry-aged beef was significantly stronger when grill-cooked compared to oven roasting. Dry-aged beef grill-cooked at 150℃ presented a higher intensity of cheesy flavor, and that grilled at 230℃ showed a greater intensity of roasted flavor compared to wet-aged beef at the same condition, respectively. Conclusion: Grilling may be effective for enhancing the unique flavor in dry-aged beef.

• Asian-Australasian Journal of Animal Sciences
• /
• 제9권1호
• /
• pp.91-99
• /
• 1996

About 7.7 million tons of straw dry matter are being rotten during the monsoon. The objective of this trial was to develop a technique to preserve straw under wet condition. To simulate the moisture content of wet straw, a dry straw was deeped overnight in water. After draining the excess water, the wet straw(668 g moisture $kg^{-1}$) was divided into twenty fractions and preserved with 0, 30, 50 ro 70 g urea $kg^{-1}$ dry matter for either of 30, 60, 90, 120 or 180 days in sealed plastic container. Considering the colour, smell, fungal infestation and pH, the wert straw was preserved excellently up to 180 days when 50 or 70 g of urea per kg DM was used. Urea preservation increased the crude protein contents of straw by 3.6 to 6.4 times (174 to $364g{\cdot}kg^{-1}$) over that of the dry straw ($48g{\cdot}kg^{-1}$). Although the NDF content of straw was not effected by the level of urea or by the length of the preservation period, but the ADF content increased (p > 0.05) by 0.086 to $0.889g{\cdot}kg^{-1}$ straw DM for each g increase in the urea level. At 48 hours, the DM degradability of dry straw was $350g{\cdot}kg^{-1}$, which increased to $633g{\cdot}kg^{-1}$ when preserved with 50 g urea $kg^{-1}$ for 180 days. For the same straw, both the rate(0.0388 vs. 0.0136 fraction $h^{-1}$), the extent(717 vs. $631g{\cdot}kg^{-1}$) of straw degradation and the estimated ME(9.55 vs. $6.51MJ{\cdot}kg^{-1}$ straw DM) were higher in the preserved than the dry straw.

• 한국정밀공학회지
• /
• 제27권1호
• /
• pp.119-124
• /
• 2010

This paper addresses the design and fabrication of desktop die-sinking dry electrical discharge machining (EDM) system and its experimental performance analysis. The developed desktop dry EDM machine has the horizontal configuration with the size of $300{\times}200{\times}260mm$. The experimental performance analysis is conducted to investigate the effects of EDM conditions and dielectric gas temperature on the surface roughness of EDMed slots and number of EDM sparks. The experimental results demonstrate that low feed rate and large electrode displacement are good for better surface roughness and more number of EDM sparks. In addition, low temperature of dielectric gas results in better surface roughness.