• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.17 no.2
• /
• pp.90-100
• /
• 2021

Molten corium-concrete interaction (MCCI) is one of the most important phenomena that can lead to the potential hazard of late containment failure due to basemat penetration during a severe accident. In this study, MCCI analytical models of the CORQUENCH code were prepared through verification calculations of several experiments, which had been performed using concrete types similar to those of the calandria vault floor in CANDU-6 plants. The behaviors of thermal-hydraulic variables related to MCCI phenomena were analyzed under the conditions of dry floor and water flooding during the severe accident stemming from a hypothetic station blackout. Uncertainty analyses on the ablation depth were also carried out. It was estimated that the concrete ablation was not interrupted due to the continuous MCCI process under the dry condition but was terminated within 24 hours under the water flooding condition. It was confirmed that the water flooding as a mitigating action was effective to achieve the quenching and thermal stabilization of the melt discharged from the calandria vessel, showing that the present models are capable of reasonably simulating MCCI phenomena in CANDU-6 plants. This study is expected to provide the technical bases to the accident management strategy during the late-phase severe accidents.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.213-220
• /
• 2010

This study presents a numerical simulation model of vertical ground heat exchangers, considering unsaturated hydro static ground conditions induced by the ground water table fluctuation. Heat transfer in ground and grout is modeled by a 3-D FEM transient conductive heat transfer model, where heat transfer between circulating fluid and heat exchanging pipe is treated as 1-D quasi steady state forced convective elements. To take into account the unsaturated ground condition, soil thermal conductivity and heat capacity which are dependent on the matric suction are applied to ground elements. Parametric studies considering various ground water table conditions are conducted to investigate the influence of unsaturated hydro static ground condition on the mean heat exchange rate of ground heat exchanger. Simulation results considering water table fluctuation show 60~100% of mean heat exchange rate for a saturated soil condition and 125~208% of that for a dry soil condition. Thus consideration of unsaturated soil condition is substantially recommended for more accurate design and performance evaluation for ground heat exchangers.

• Corrosion Science and Technology
• /
• v.7 no.2
• /
• pp.119-124
• /
• 2008

Steel is generally not corrosion resistant to water with formation of non protective rusts on its surface. Rusts are composed of iron oxides such as $Fe_3O_4$, $\alpha-$, $\beta-$, $\gamma-$and ${\delta}-FeOOH$. However, steel, particularly weathering steel containing small amounts of Cu, Ni and Cr etc., shows good corrosion resistance against rural, industrial or marine environment. Its corrosion rate is exceedingly small as compared with that of carbon steel. According to the exposure test results undertaken in outdoor environments, the atmospheric corrosion rate for weathering steel is only 1 mm for a century. Atmospheric corrosion for steels proceeds under alternate dry and wet conditions. Dry condition is encountered on steel surface on fine or cloudy days, and wet condition is on rainy or snowy days. The reason why weathering steel shows superior atmospheric corrosion resistance is due to formation of corrosion protective rusts on its surface under very thin water layer. The protective rusts are usually composed of two layer rusts; the upper layer is ${\gamma}-FeOOH$ termed as lepidocrocite, and inner layer is nano-particle ${\alpha}-FeOOH$ termed as goethite. This paper is aimed at elucidating the atmospheric corrosion mechanism for steel in comparison with corrosion in bulky water environment by use of empirical data.The summary is as follows: 1. No corrosion protective rusts are formed on steel in bulky water. 2. Atmospheric corrosion for steel is the corrosion under wetting and drying conditions. Corrosion and passivation occur alternately on steel surface. Steel, particularly weathering steel with small amounts of alloying elements such as Cu, Ni and Cr etc. enhances forming corrosion protective rusts by passivation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.3
• /
• pp.27-41
• /
• 2017

The purpose of this study is to diagnose the possibility of future drought expression by late March dryness in rice paddy areas using Terra MODIS NDVI (Normalized Difference Vegetation Index). We tested the degree of dryness by comparing the 2000-2015 average NDVI with yearly NDVI, which we name DCI (Dry Condition Index). The 16-day interval DCIs from March 6 to May 25 were evaluated with spatio-temporal expression of South Korea. In particular, we find that the DCI for April 7 (March 23 to April 7) offered reasonable prediction of paddy dryness during drought years. The April 7 DCI value for dry conditions ranged from 0.04 to 0.08 while the DCI for normal conditions ranged from -0.04 to 0.01. The DCI can be one of the indicators used to evaluate the dryness of rice paddy areas at the beginning of the spring season.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.4
• /
• pp.26-34
• /
• 2008

This study focus on segmentation process that classifies road surfaces into 5 different categories, dry, wet water, icy, and snowy surfaces by analyzing asphalt-paved road images taken in daylight. By using the polarization coefficients, the proportions of horizontally polarized components to vertically polarized components, regions with over 1.3 polarization coefficients are classified as wet surfaces. Except for wet surfaces, the decision process a lies time-frequency analysis to other parts by using the third order wavelet packet transform. In addition, by using the average frequency characteristics of dry and icy surfaces from image templates, decide which is closer to a test image, and finally identify dry and icy surfaces. It is confirmed that the reposed estimation and segmentation of recognition on various images. This can be interpreted as an indication that image-only mad surface condition supervision is probable.

• Atmosphere
• /
• v.17 no.3
• /
• pp.241-253
• /
• 2007

This paper investigates summer precipitation change in East Asia according to switching surface boundary condition over South Korea and Shantung. Simulations are carried out by ECHO-G/S for 20 years (1980-1999). Surface condition over both areas in ECHO-G/S is represented by ocean (OCN experiment). In OCN experiment, the summer precipitation is considerably underestimated around the Korean peninsula (the dry region) and overestimated over the eastern Tibetan Plateau (the wet region). It may be related that the lack of the heat sources from the unrealistically prescribed land-sea mask weakens northward expansion of rainband and the development of convective precipitation. Moreover the simulated rainband retreats before June in connection with the early genesis of summer monsoon circulation. The systematic bias of the summer precipitation over the dry and wet regions are reduced comparing with the OCN experiment when the land-sea masks over South Korea and Shantung are realistically considered as land (LND experiment). These improvements can be explained by the thermodynamical dissimilarity between land and ocean. Enhanced warming by switching the areas from sea to land has led to develop the thermal low over Yellow Sea with the cyclonic circulation. Thus, this cyclonic circulation supports moistures from the south to the dry region and blocks to the wet region. The heat transport from the land surface to atmosphere plays a key role in the developing convective precipitation in local scale and maintaining the precipitation and the rainband. Therefore, this results indicate that the design of the realistic land-sea distribution is required for the accurate simulation of the regional precipitation.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.281-281
• /
• 2017

Recently, global warming by greenhouse gas effect is getting danger and danger for human life and agriculture at present. In Indonesia, according to heavy rain in the agriculture land is often covered by excess water in result crop growth would be affected negative. This water stress triggers roots failure in anaerobic condition for upland crop because of limiting roots respiration. Chili pepper grows in upland sometimes in touch with waterlogging due to rainfall and /or over flow water from river in Indonesia. In this case, roots growing is inhibited by effect of shortage of oxygen at root cap. Therefore, the objective of this study is to observe the plant behavior in waterlogging using mahor local genotypes (Ferosa, Laris, Romario) in Sumatra. The experiment was kept by at 1cm depth water above the soil surface as a waterlogged treatment for ---days. As a result, waterlogging affected plant growth of chili negatively, especially for roots growth. Almost roots were getting bad and changed color for brown during waterlogging. A significant negative effect for nutrient absorption by roots was found in dry weight of all varieties during waterlogging. Dry weight of roots was decreased by 81.4% and 67.6%, and those of aerial part decreased by 74% and 67.2% compared with control in Ferosa and Romario at 1week after treatment. On the other hand, dry weight of roots was decreased only 35% in Laris. Therefore, Laris has a tolerance for waterlogging compared to with other varieties. Also, Laris in SPAD value was kept initial level during waterlogging however those of Ferosa and Romario decreased. Finally, due to impact of waterlogging, it may be the roots become failure because of less aerenchyma formation under anaerobic condition. We need confirm aerenchyma formation morphologically in the future.

• International Journal of Highway Engineering
• /
• v.14 no.1
• /
• pp.9-16
• /
• 2012

The performance of road markings is classified into the visibility at daytime, night time, wet condition and rainy conditions. The objective of this study is to obtain the driving safety of drivers under conditions of unstable weather condition such as the rain. The visibility of road markings is closely related to the preview time and detection distances and the ways to improve road marking materials and increase the dry retroreflectivity and wet retroreflectivity, which are the measures of daytime and nighttime visibility is researched to decrease the traffic accidents. For this purpose, Road marking glass beads with the refraction rate of 1.5 and 2.2 are introduced to raise the retroreflectivity. After investigating the minimum threshold retroreflectivity and Install Minimum retroreflectivity at home and abroad, minimum control values for the roadmarking visibility and improvement of nightime rainy retroreflectivity are suggested by physical properties and retroreflectivity experiments.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.5
• /
• pp.558-562
• /
• 1996

The growth and yield of Job's tears (Coix lacryma-jobi L.) under the flooded paddy and upland (dry paddy) field conditions were compared at three sowing dates and two planting densities. Job's tears grown under flooded paddy field was much shorter in plant height, but greater in number of tillers than those grown under upland. Photosynthesis rate of Job's tears grown under flooded paddy field was higher and the weight of dry roots heavier but the damages of pest and leaf blight disease smaller than those grown under upland. For the above mentioned reasons, the grain yield of Job's tears grown under flooded paddy field was higher by up to 85% than that grown under upland. There was no significant difference in grain yield between the planting densities. The earlier sowing brought about the less grain yield in upland field condition, while sowing plot on the 15th of May showed the highest grain yield in the flooded paddy field condition.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.1
• /
• pp.48-54
• /
• 1989

This study was conducted to select the best adapted alfalfa cultivars among 32 introduced alfalfa cultivars in the Korean environmental condition. Plant height and dry matter yield per cultivar were determined. On the point of plant height, seven high ranked cultivars among the 32 alfalfa cultivars in high order were Diamond> Milkmaker> Arrow>Chalienger>Sapphire > Dekalb brand 135> LS-1920. and seven low ranked cultivars in low order were Pioneer brand 5929> Maxidor> Dekalb brand 167> Pierce> Blazer> Raidor> Pioneer brand 532. Seven high ranked cultivars from 32 alfalfa cultivars on the dry matter yield in high order were Pike>LS-1920>Challenger>Salute>Diamond>Decathlon>Pioneer brand 581, and seven low ranked cultivars in low order were Maxidor>Pioneer brand 5929>Pioneer brand 532>Florida 77> Pierce> Magnum> Blazer. Dry matter yield per cultivar was also greater when alfalfa cultivar was appeared higher plant height compared with those which were lower plant height. Leading cultivars for plant growth and yield under the Korean environmental condition were Pike, LS-1920, Challenger, Salute, Diamond among the 32 alfalfa cultivars. All those cultivars except Challenger cultivar are Semi-dormant which can be well grown under moderate temperatures.