• Asian-Australasian Journal of Animal Sciences
• /
• 제23권4호
• /
• pp.465-474
• /
• 2010

The effects of four types of tropical protein-rich trees on nutrient digestibility, nitrogen (N) balance, urinary purine derivative (PD) excretion and blood metabolites in four Thai Brahman cattle (290${\pm}$2.5 kg) were studied. The animals were fed twice daily, with each feeding consisting of 1 kg (fresh weight) rice straw and one of the four dietary supplements: i) 1.98 kg oven-dried rain tree pods (RTP) and 20 g premix (RTPP), ii) 980 g RTP and 1 kg sun-dried leucaena leaves and 20 g premix (LLRT), iii) 980 g RTP and 1 kg sun-dried cassia leaves and 20 g premix (CLRT) and iv) 980 g RTP and 1 kg sun-dried mulberry leaves and 20 g premix (MLRT). The apparent dry matter (DM) and organic matter (OM) digestibilities were higher (p<0.05) in cattle fed the CLRT supplement than in those fed the other supplements, whilst the apparent digestibility of neutral detergent fibre (NDF) was higher (p<0.05) in cattle fed the CLRT and MLRT supplements than in those fed the other supplements. The N-balance of cattle fed LLRT and CLRT supplements was higher (p<0.05) than in cattle fed RTPP and MLRT supplements, whilst the apparent digestibility of N was highest (p<0.05) in cattle fed RTPP supplement, compared to the other supplements. Allantoin and PD excretion in the urine, and the ratios of allantoin/DOMI and PD/DOMI were higher (p<0.05) in cattle fed RTPP and MLRT than for those fed LLRT and CLRT supplements. Plasma ${\beta}$-hydroxy butyrate (${\beta}$-HBA) and insulin concentrations were higher (p<0.05) in cattle fed RTPP supplement than in those fed the other supplements. The study demonstrated the value of using local multipurpose trees (MPTs) to improve Brahman cattle feeding systems in the tropics.

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.166-166
• /
• 1982

This study has been made to make an observation regarding present status of the coal mine props which is desperately needed for coal production, despite of great shortage of the timber resources in this country, and investigate the effects of diffusion process on the decay resistances of the mine props as applied preservatives of Malenit and chromated zinc chloride. The results are as follows. 1. Present status of the coal mine props Total demand of coal mine props in the year of 1975 was approximately 456 thousand cubic meters. The main species used for mine props are conifer (mainly Pinus densiflora) and hardwood (mainly Quercus). Portions between them are half and half. With non fixed specification, wide varieties of timber in size and form are used. And volume of wood used per ton of coal production shows also wide range from 0.017 cubic meter to 0.03 cubic meter. 2. Decay resistance test a) The oven dry weight decreased between untreated specimen and treated specimen has not shown any significantly, although it has shown some differences in average values between them. It may be caused by the shorter length of the test. b) The strength of compression test between untreated specimen and treated specimen has also shown the same results as shown in case of weight decrease. Reasons assumed are the same. c) The amounts of the extractives in one percent of sodium hydroxide (NaOH) between untreated and treated specimen have shown the large value in case of untreated specimen than that of treated. 3. The economical benifit between untreated and treated wood when applied in field has seen better in long tenn base in case of treated wood, although the primary cost of treated wood add a little bit more cost than that of the untreated wood.

• 폴리머
• /
• 제26권3호
• /
• pp.335-343
• /
• 2002

블렌드 (PET/PETG 70/30 블렌드) 수지는 폴리에틸렌테레프탈레이트 (PET)와 폴리에틸렌테레프탈레이트 글리콜 (PETG)을 무게 비 70/30으로 혼합하여, 이축 압출기를 사용하여 제조하였다. 미연신 필름은 이 블렌드와 순수 PETG 수지를 압축성형기로 각각 용융 압축시켜 제조하였고 연신 필름은 미연신 필름을 모세관 레오메타를 사용하여 연신시켜 제조하였다. 제조된 블렌드 연신 필름과 PETG 연신 필름의 결정성, 수축율, 열적, 동역학적 및 기계적 특성을 X-선 회절분석기, 오븐기, DSC, 및 인장시험기를 사용하여 조사하였다. 블렌드와 PETG필름의 결정화도와 밀도는 연신비와 연신 속도의 증가와 더불어 증가하였으나 반면 연신 온도 증가와 더불어 감소하였다 또한 블렌드 필름의 결정화도와 밀도는 PETG 필름보다 높게 나타났다. 두 필름의 인장강도와 인장탄성률은 연신비 및 연신 속도 증가와 더불어 증가하였고 연신온도 증가에 따라 감소하였다. 또한 블렌드 필름의 인장강도와 인장탄성률이 PETG 필름 보다 높게 나타났다. 두 필름의 수축율은 연신비와 연신 속도가 증가할수록 감소하였고 미연신 블렌드 필름의 수축율이 순수 PET 필름보다 600% 증가함을 보였다.

• 한국약용작물학회지
• /
• 제10권3호
• /
• pp.200-205
• /
• 2002

길경의 부탄올 분획으로부터 지표성분을 분리, 정제하기 위해 $SiO_2$ 컬럼크마토그래피를 실시한 결과 1종(화합물 1)의 단일 물질을 순수 분리하였으며 화합물 1의 구조는 $^1H$, $^{13}C$ NMR 등 분광학적 관측 결과 platycodin D로 확인되었다. Platycodin D의 HPLC 정량법을 검토한 결과, 검출기는 증기화광산란검출기(ELSD)를, 컬럼은 역상컬럼을 사용하여 길경 MeOH 추출액으로부터 효율적인 지표성분 정량이 가능하였다. 추출조건을 재검토한 결과 환류추출보다는 초음파 추출이 더 효율적이었으며 추출용매로는 80% MeOH이 다른 용매조건보다 추출효율이 우수하였다. 건조조건의 검토에서는 platycodin D의 함량이 양건이나 양건과 건조기 혼용건조 보다 건조기 단독 건조시 더 높았으며 특히 $60^{\circ}C$ 열풍건조에서 그함량이 0.083%로서 가장 높았다. 묽은 에탄올 엑스 함량도 건조기만을 이용한 열풍건조가 양건과 건조기 열풍건조를 혼용한 방법보다 4% 정도 더 높았다.

• Journal of the Korean Wood Science and Technology
• /
• 제45권5호
• /
• pp.519-524
• /
• 2017

본 연구는 황벽나무의 물리, 역학적 성질의 특성과 부후성을 조사하였다. 기건밀도는 실내, 외 방치한 목재에서 각각 0.41, $0.43g/cm^3$로 나타났다. 전수축율 시 T/R비는 실내, 외에서 각각 1.40, 1.32로 나타났다. 흡습성은 온도 $40^{\circ}C$ 상대습도 90% 경우 실내, 외에서 각각 16.30, 15.80%로 나타났다. 압축강도는 실내, 외에서 각각 43.81, 40.33 MPa 휨강도는 84.63, 68.80 MPa, 충격강도는 3.43, $4.00J/cm^2$, 경도는 횡단면에서 각각 47.92, 49.20 MPa로 나타났다. 경도는 횡단면에서 각각 47.92, 49.20 MPa로 나타났다. 1년간 실내에 방치한 목재와 실외에 방치한 목재는 부후에 강하고, 또한 T/R비도 낮은 편으로 치수가 안정한 나무로 판단된다.

• Journal of Chest Surgery
• /
• 제20권4호
• /
• pp.643-654
• /
• 1987

The effect of prostacyclin[PGI, ] on myocardial preservation during global ischemia was studied in the isolating working rabbit heart model. Forty hearts underwent a 15 minute period of retrograde nonworking perfusion with Krebs-Henseleit buffer solution [37*C] and were switched over to the working mode for 15 minutes. After baseline measurement of heart rate, peak aortic pressure, aortic flow, and coronary flow, all hearts were subjected to 60 minutes of ischemic arrest at 10*C induced with St. Thomas Hospital cardioplegic solution: Group I had single dose cardioplegia, Croup II double dose, Croup III oxygenated double dose, and Group IV single dose with PCI, infusion [10ng/min./gm heart weight]. Hearts were then revived with 15 minute period of nonworking reperfusion at normothermia, followed by 30 minutes of working perfusion. Repeat measurements of cardiac function were obtained and expressed as a percent of the preischemic baseline values. Oxygen content of arterial perfusate and coronary effluent was measured by designed time interval. Leakage of creatine kinase was determined during post-ischemic reperfusion period. Finally wet hearts were weighed and placed in 120*C oven for 36 hours for measurement of dry weight. In the PGI, treated group [IV], heart rate increased consistently throughout the period of reperfusion from 100*5.0% [p<0.001] to 107*6.2% [p<0.001]. The percent recovery of aortic flow showed 95*5.7% [p<0.001] at the first 3 minute and full recovery through the subsequent time. Coronary flow was augmented significantly in the 3 minute [96*6.2%, p<0.001] and then sustained above baseline values. Among the Croup I, II, and III, all hemodynamic values were significantly below preischemic levels. PGI2 relatively increased oxygen delivery [1.22*0.19ml/min, p<0.001] and myocardial oxygen consumption [0.90*0.13ml/min, p<0.001] during reperfusion period. Leakage of creatine kinase in the PGI2 group was 9.3*1.58IU/15min [p<0.001]. This was significantly lower than Group I [33.0*2.68 IU/15min]. The water content of PCI2 treated hearts [81*0.9%, p<0.001] was also lower than the other groups.

• 접착 및 계면
• /
• 제3권2호
• /
• pp.40-44
• /
• 2002

본 실험에서는 고무-황동 도금 스틸 코드 복합체의 접착성에 미치는 미가류 복합체의 방치 기간과 가류 복합체의 열노화의 영향을 검토하였다. 또한 이런 방치 조건에 따른 접착력 변화가 타이어 내구력에 어떤 영향을 미치는지를 평가하였다. PAD 접착 시편을 사용하여 박리 접착 강도를 측정하였다. 미가류 복합체의 방치 기간은 공장 조건에서 최대 35일이고 가류 복합체의 열노화는 $85^{\circ}C$ 항온조에서 5, 10일간 실시하였다. 박리 접착 강도는 방치일수가 길수록 하락하는 경향을 보였다. 또한 열노화 기간이 길수록 그 값은 낮았다. 박리 접착 강도가 낮을수록 타이어 내구력도 낮았고, 그 주된 원인이 수분과 열에 의한 노화가 고무와 스틸 코드의 접착력을 하락시켜 코드와 고무의 계면에서 파괴가 일어났기 때문이라는 것을 SEM관찰과 내구력 평가로 확인할 수 있었다. 즉, 스틸 코드 표면의 부식이나 접착증의 노화가 접착강도 하락에 크게 영향을 미치고 그 결과 타이어의 내구력 하락에도 직접적인 영향을 미친다는 것을 알 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제22권1호
• /
• pp.44-53
• /
• 1994

This research was carried out to investigate the effect of paper sludge addition on formaldehyde emission, and physical and mechanical properties of UF-particleboard. In order to investigate the effect of paper sludge addition to resin, particleboards were bonded with urea-formaldehyde resins containing 5, 10, 15% paper sludge powders of three types(A Type: -200 mesh, B Type: -100~+200 mesh. C Type: -50~+100 mesh), based on weight of resin solid. Also the effect of paper sludge addition to furnish was studied from particleboards fabricated with ratios of sludge to particle of 5:95, 10:90, 15:85 based on oven-dry weight. Tests were conducted on the manufactured particleboards to determine formaldehyde emission, bending properties, internal bond strength and thickness swelling. The obtained results were summarized as follows: The addition of paper sludge powder to resin yielded a higher pH of cured resin. Formaldehyde emission decreased with the increase of paper sludge powder addition to resin and paper sludge composition ratio to furnish. Particleboard bonded with urea-formaldehyde resin containing paper sludge powder and particleboard mixed with paper sludge have similar bending properties(MOR, MOE) and thickness swelling compared with control particleboard. Internal bond strength of particleboards treated with paper sludge were lower than that of control particleboard. The use of paper sludge as scavenger was achieved reduction of formaldehyde emission without depression of physical and mechanical properties of particleboard. Also the use of paper sludge was able to concluded that there is possibility of partial substitution of wood particle materials.

• The Journal of Advanced Prosthodontics
• /
• 제7권1호
• /
• pp.47-50
• /
• 2015

PURPOSE. This study aimed to discover a way to increase the bond strength between bis-acryl resins, using a comparison of the shear bond strengths attained from bis-acryl resins treated with light curing, pressure, oxygen inhibition, and heat. MATERIALS AND METHODS. Self-cured bis-acryl resin was used as both a base material and as a repair material. Seventy specimens were distributed into seven groups according to treatment methods: pressure - stored in a pressure cooker at 0.2 Mpa; oxygen inhibition- applied an oxygen inhibitor around the repaired material,; heat treatment - performed heat treatment in a dry oven at $60^{\circ}C$, $100^{\circ}C$, or $140^{\circ}C$. The shear bond strength was measured with a universal testing machine, and the shear bond strength (MPa) was calculated from the peak load of failure. A comparison of the bond strength between the repaired specimens was conducted using one-way ANOVA and Tukey multiple comparison tests (${\alpha}$=.05). RESULTS. There were no statistically significant differences in the shear bond strength between the control group and the light curing, pressure, and oxygen inhibition groups. However, the heat treatment groups showed statistically higher bond strengths than the groups treated without heat, and the groups treated at a higher temperature resulted in higher bond strengths. Statistically significant differences were seen between groups after different degrees of heat treatment, except in groups heated at $100^{\circ}C$ and $140^{\circ}C$. CONCLUSION. Strong bonding can be achieved between a bis-acryl base and bis-acryl repair material after heat treatment.

• 한국조리학회지
• /
• 제15권3호
• /
• pp.128-138
• /
• 2009

본 연구에서는 약리작용과 기능성, 풍미작용을 지닌 쑥의 품질과 항산화성을 분석하였다. 수분함량은 가열시간과 온도에 따라 감소하였고, 무기질에서 P는 덖음의 230 > 80 > $110^{\circ}C$ 순서로 나타났고 데침은 1, 2분 처리에서는 0.50%, 5분 처리에서는 0.38%로 나타났다. Ca는 처리별로 큰 유의차가 나타나지 않았으며, Fe는 100 g 당 0.54~1.02 mg으로 일반채소보다 높은 것으로 나타났다. 페놀 화합물은 대조구인 생쑥에서 가장 높았고, 데침의 1분이 그 다음으로 나타났고 덖음의 $110^{\circ}C$에서 가장 낮은 것으로 나타났다. 항산화성인 전자공여능은 덖음의 $230^{\circ}C$ 14분 처리에서 급속히 감소하였다. 본 연구를 통해 쑥의 식품으로 이용시 덖음의 낮은 온도나 우리나라 전통방식인 데침을 이용하는 것이 좋은 것으로 생각되었다.