• 전기학회논문지
• /
• 제63권7호
• /
• pp.1013-1018
• /
• 2014

This paper described the development of equalizing spacer for minimization of voltage drop according to DC feeder extension. Power consumption is increased as shorter interval of train driving time and transportation capacity increase in urban subway. Therefore we investigated voltage drop of catenary at a point in case of traction driving of a train in parallel to the DC power supply system. Based on it's result, equalizing spacer is designed and fabrication to minimize the voltage drop in accordance with the power supply line arranged in three rows, and then its performance was confirmed that the stress distribution of main body and the distributed load are satisfied through the body structure modeling.

• 한국생산제조학회지
• /
• 제24권1호
• /
• pp.117-123
• /
• 2015

The need for drop simulations for board-leveled flip chips in micro-system packaging has been increasing. There have been many studies on flip chips with various solder ball compositions. However, studies on flip chips with Sn-1.0Ag-0.5Cu and Sn-3.0Ag-0.5Cu have rarely been attempted because of the unknown material properties. According to recent studies, drop simulations with these solder ball compositions have proven feasible. In this study, predictions of the impact lifetime by drop simulations are performed considering Cu and Cu/Ni UBMs using LS-DYNA to alter the design parameters of the flip chips, such as thickness of the flip chip and size of the solder ball. It was found that a smaller chip thickness, larger solder ball diameter, and using the Cu/Ni UBM can improve the drop lifetime of solder balls.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.109-110
• /
• 2023

Domestic ultra-hard road repair materials require a lot of time before the road can be opened to traffic. Therefore, in this study, Methyl Methacrylate (MMA) based road repair material was used to improve the above problems. Furthermore, the basic physical properties of MMA-based pavement repair materials are examined to confirm their suitability in concrete pavements. For this study, two types of MMA road repair materials (A type and B type) were selected. Then, the curing of the test specimens prepared for painting was carried out under three conditions. The experimental items were viscosity (drop time) and drying time (set to touch, dry-hard). As a result of the experiment, viscosity (drop time) was faster in type A than in type B. The drying time results were as follows. In the case of set ti touch, both type A and type B dried in about 10 minutes regardless of the curing conditions. In the case of dry-hard, regardless of the curing conditions, A type dried longer than B type, but it dried faster than conventional road repair materials. Therefore, within the scope of this study, it is considered that A type has a high potential for utilization as a road repair material.

• 한국광학회지
• /
• 제27권5호
• /
• pp.174-180
• /
• 2016

튜닝 가능한 광 신호 지연기를 설계, 제작 및 특성 측정을 하였다. 광 신호 지연기는 네 개의 폴리머 링 공진기 add/drop 필터들과 그 사이에 배치된 지연 도파로들로 구성되었다. 폴리머 도파로는 한변의 길이가 $1.8{\mu}m$ 인 정사각형 매립 구조이고, 코어와 클래딩의 굴절율은 각각 1.48과 1.37이다. 이와 같은 도파 구조로 인하여 매우 작은 반경의 곡선도파로를 활용함으로써, 콤팩트한 소자를 실현할 수 있다. 각각의 add/drop 필터의 링 공진기 상에 전극을 형성하여 열 광학 효과에 의한 튜닝이 가능하도록 하였다. 측정 결과, 각각의 add/drop 필터를 튜닝함으로써 지연 도파로의 수에 비례하는 지연 시간인 110 ps, 225 ps, and 330 ps를 확인할 수 있다.

• 품질경영학회지
• /
• 제25권2호
• /
• pp.15-27
• /
• 1997

This paper describes a highly accelerated life test (HALT, USPCBT) method for rapid qualification testing of STH PWB(Silver Through Hole Printed Wiring Boards). This method was carried out to be an alternative to the present time-consuming standard 1344 hours life testing(THB). The accelerated life test conditions were $121^{\circ}C$/95%R.H. at 50V bias and without bias. Their results are compared with those observed in the standard 1344 hours life test at $40^{\circ}C$/95%R.H. at 50V bias and without bias. The studies were focused on the samples time-to-failure as well as the associated conduction and failure mechanisms. The abrupt drop of insulation resistance is due to the absorption of water vapour. And the continuous drop of insulation resistance is due to the Ag migration. The ratios of time-to-failure of HALT(USPCBT) to THB were 25 and 11 at 50V bias and without bias respectively.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 추계학술발표회요약집
• /
• pp.100-100
• /
• 1999

• 한국광학회지
• /
• 제15권3호
• /
• pp.193-199
• /
• 2004

우리는 이중공명 광펌핑(double resonance optical pumping; DROP)효과를 이용하여 루비듐($^{87}$ Rb) 원자의 5P$_{3}$2/-4D$_{3}$2/와 5P$_{3}$2/-4D$_{5}$ 2/ 전이선에서 DROP 스펙트럼을 관측하고, 1.5 $\mu\textrm{m}$ 레이저의 주파수를 무변조 안정화하였다. 관측한 DROP 스펙트럼은 기존의 광-광이중공명(optical-optical double resonance; OODR) 스펙트럼보다 높은 신호대잡음비를 가지며, 약 10 MHz의 좁은 선폭을 갖고 있다. DROP 스펙트럼의 상대적인 세기는 자발방출에 의한 광펌핑 정도로 설명할 수 있었다. DROP스펙트럼에 안정화된 1.5 $\mu\textrm{m}$ 레이저의 주파수 흔들림은 샘플링 시간 0.1초에서 0.2 MHz로 측정되었고, 상대주파수 흔들림은 평균시간 100초에서 약 1${\times}$$10^{-11}$이었다.

• 공업화학
• /
• 제20권1호
• /
• pp.15-20
• /
• 2009

본 연구에서는 고분자 비이온 계면활성제 Pluronic L64 ($EO_{13}PO_{30}EO_{13}$) 마이셀에 의한 옥탄의 가용화에 관한 실험을 수행하였다. Oil drop contacting 실험을 이용하여 옥탄 오일을 계면활성제 마이셀 용액에 주입한 후 시간에 따른 옥탄 오일의 크기를 측정하여 가용화 속도를 결정하였다. 가용화 속도는 초기 오일 drop의 크기에 상관없이 일정하게 나타났으며, 계면활성제 농도에 따라 거의 선형적으로 증가함을 알 수 있었다. 이러한 결과로부터 Pluronic L64 마이셀에 의한 옥탄의 가용화는 diffusion-controlled 메커니즘이 아닌, interface-controlled 메커니즘을 따르는 것을 확인할 수 있었다. Spinning drop tensiometer를 이용한 dynamic interfacial tension은 계면활성제 농도를 8, 9, 10 wt%로 증가시킴에 따라 각각 $2.59{\times}10^{-2}$, $2.45{\times}10^{-2}$, $2.13{\times}10^{-2}mN/m$으로 감소하는 것을 알 수 있었다. 평형에 도달하는 데 걸리는 시간은 계면활성제 농도에 따라 감소하지만 그 차이가 매우 작았으며, 약 7 min 이내에 평형에 도달하는 것을 확인할 수 있었다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XIII)
• /
• pp.381-383
• /
• 2003

담체별 압력강하실험 결과 섬유상 담체가 타 담체에 비해 적었으며, 장기간의 pilot 운전에도 안정한 효율을 유지하였다.

• 한국수의병리학회:학술대회논문집
• /
• 한국수의병리학회 2002년도 추계학술대회초록집
• /
• pp.66-79
• /
• 2002

The basic treatments - Epithelial ＆ stromal debridement with a swab or diamond burr. - Possible placement of a collagen shield or nictitans flap. - Topical treatment with Adequan IM diluted in artificial tears : 1 ml Adequan + 4 ml tears : One drop four times daily. - Topical treatment with an antibiotic drop : Three times daily - 5％ sodium chloride ointment : Four times daily. If inflammation is severe - Topical treatment with nonsteroidal agent : Four times daily (Voltaren, Ocufen, or Profenyl) - Cyclosporine A (Optimmune) : Twice daily Healing time - Healing typically occurs rapidly - Fluorescein negative : 7-10 days - Vascular keratitis : Often several months