• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.1
• /
• pp.30-35
• /
• 2005

An automatic transmission pattern with the fixed standard shift map can provide comfortable shift to driver. However it may be a complain to provide shift by the same shift pattern for driver because the inclination of a driver may be various. Therefore, in this paper, we design the decision module, which can decide the driving style using input to decide the inclination of the driver and driving manner. The goal of this paper is to calibrate the shift map according to the inclination of the driver using the decided driving manner from the proposed module. As a result, the proposed intelligent automatic transmission system can provide a suitable shift point and time to the driver. To verify the performance of the proposed system, the real data that is obtained from the road test will be used.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.6 s.144
• /
• pp.566-574
• /
• 2005

Reduction of a ship's rolling is the most important performance requirement for improving the safety of the crew on board and preventing damage to cargos as well as improving the comfort of the ride. A mass driving anti-rolling system (MO-ARS) might be one candidate of several systems against the ship's rolling. As the movable range of the mass on the ship is finite, the control system must include restriction on the mass position to protect the device and the ship. This restriction usually causes windup phenomenon and control performance is deteriorated seriously. Two control algorithms, anti-windup control and saturated sliding mode control, are studied in this paper. Control performance and robustness problem are checked out by numerical simulations.

• Journal of the Optical Society of Korea
• /
• v.16 no.4
• /
• pp.449-456
• /
• 2012

For two well-known modulation methods, stepwise current modulation (SCM) and pulse width modulation (PWM), the effects of driving current modulation conditions on chromaticity were experimentally investigated in a white LED lighting system. For the experimental implementation of both SCM and PWM, a white LED lighting was fabricated using phosphor converted (PC) white light emitting diodes (LEDs) and a driving circuit module was developed. By using them, the variations of illuminance, color coordinates, and spectrum were evaluated under various forward current conditions. Through the analysis in color coordinates, yellow shift in SCM and blue shift in PWM were observed on chromaticity diagrams with increasing average driving current. In addition, in order to analyze color deviation quantitatively, color distance before and after current increase, and the correlated color temperature (CCT) were calculated. As a result, for the white LED lighting in both modulation conditions, the maximum difference in the calculated CCT was obtained close to 1000 K. It means that careful consideration is required to be taken in the design of illumination systems to avoid serious problems such industrial accidents.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.12
• /
• pp.9-15
• /
• 2000

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.629-632
• /
• 1991

Load Variation effects on the system driving performance. Therefore, this paper presents as a application example of Anti-windup method using general incremental form for a gun servo system of load variation involved. Also, this method can be easily implemented compared to gain scheduling technique.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.135-136
• /
• 2009

• Journal of Cadastre & Land InformatiX
• /
• v.53 no.2
• /
• pp.53-66
• /
• 2023

Recently, there has been a significant interest in the development of autonomous driving simulation environment based on digital twin. In the development of such digital twin-based simulation environment, many researches has been conducted not only performance and functionality validation of autonomous driving, but also generation of virtual training data for deep learning. However, such digital twin-based autonomous driving simulation system has the problem of requiring a significant amount of time and cost for the system development and the data construction. Therefore, in this research, we aim to propose a method for rapidly designing and implementing a digital twin-based autonomous driving simulation system, using only the existing 3D models and high-definition map. Specifically, we propose a method for integrating 3D model of FBX and NGII HD Map for the Busan EDC area into CARLA, and a method for adding and modifying CARLA functions. The results of this research show that it is possible to rapidly design and implement the simulation system at a low cost by using the existing 3D models and NGII HD map. Also, the results show that our system can support various functions such as simulation scenario configuration, user-defined driving, and real-time simulation of traffic light states. We expect that usability of the system will be significantly improved when it is applied to broader geographical area in the future.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.7
• /
• pp.127-134
• /
• 2014

Active body control system is an important system for determining the driving stability and ride comfort of the vehicle. Active body control system is composed of a cylinder unit power supply unit, and control valve unit. Control valve is a proportional pressure control valve, the dynamic characteristics of the valve affects the performance of the active body control system. We have developed an analytical model, we analyzed the design parameters of the proportional pressure control valve. Further, by knowing the design parameters effect on the system and to optimize the design parameters, and improved performance of the dynamic properties.

• Annual Conference of KIPS
• /
• 2023.11a
• /
• pp.880-881
• /
• 2023

본 연구는 차량 동역학이 적용된 자율주행 시뮬레이터에서 구현된 차량의 거동이 실제 차량과 유사한지 검증하는 것이다. 이를 위해 실제 차량모델에 외력을 가할 수 있는 기구를 개발하여 데이터를 획득하고 분석하고자 한다. 시뮬레이터에서 구현된 차량과 유사한 서스펜션 구조를 가진 차량 모델을 만들고 센서를 달아 차량의 운동 모델을 모사했으며, 캠과 감속기어를 활용해 외력을 모사하기 위한 기구를 제작하였다.

• Journal of the Korean Society of Systems Engineering
• /
• v.11 no.2
• /
• pp.137-146
• /
• 2015

This paper addresses the definition of the driver's functions for an automated vehicle of level 3, as defined by the Society of Automotive Engineers. By combining the constituent systems surrounding the automated vehicles in specific use cases, their interactions could be refined in a stepwise approach. This approach enables traceability of interactions between drivers, automated driving systems, and other constituent systems.