• Journal of the Korean Institute of Gas
• /
• v.24 no.2
• /
• pp.9-14
• /
• 2020

This paper is a purpose to study the failure examples for a large bus vehicle fire. The first example, the researcher certified the fact that the absorbing material break away from the upper side of engine room because of weaken durability and the fire was produced in engine. The second example, it sought the fact that the fire breaks out by electric short because of over-load of compressor. The third example, it found the fact that the fire took place by heating of bellows upper part that was connected with muffler and exhaust manifold. The fourth example, it knew the fact that the fire occurred because of the electric short inside junction box of crash body part that was located to driver seat rightside. Therefore, the fire of a large bus occurring by decrepit of absorbing material and electric short have to thoroughgoingly manage the damage and dangerousness if it happens.

• Journal of the Korean Institute of Gas
• /
• v.23 no.4
• /
• pp.40-45
• /
• 2019

This paper is a purpose to study the failure example for heavy-duty vehicle fire. The first example, the researcher found the engine over-heating phenomenon causing a coolant leakage by the sealing poor of head-gasket because of D-ring part deformation contacting with cylinder liner top-part and cylinder head. He certified a fire breakout by short transferred to surrounding wiring of air-cleaner. The second example, a brake lining by return fault of break operating S cam causing with much wear of a rear 4 wheel brake lining repeatably was worn by friction. In the long run, it became the cause of fire. The third example, the researcher knew the fire cause was came about the short of wire by overload of tilting motor when the driver tilted up the cap to inspect a engine. Therefore, a heavy-duty fire must minimize the fire occurrence by thorough controlling.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.2
• /
• pp.129-143
• /
• 2019

As the importance of autonomous vehicle safety is emphasized, the application of ISO-26262, a development verification guideline for improving safety and reliability, and the safety verification of autonomous vehicles are becoming increasingly important, in particular, SAE standard level 3 or higher level autonomous vehicles detect and decision the surrounding environment instead of the human driver. Therefore, if there is and failure or malfunction in the autonomous driving function, safety may be seriously affected. So autonomous vehicles, it is essential to apply and verity the safety concept against failure and malfunctions. In this study, we study the fault injection scenarios for safety evaluation and verification of autonomous vehicles using ISO-26262 part3 process and STPA were studied and safety measures for safety concept design were studied through simulation bases fault injection test.

• Journal of the Korean association of regional geographers
• /
• v.23 no.2
• /
• pp.403-419
• /
• 2017

This study analyzed the forces to drive the change of urban green spaces in Daegu from 1989 to 2009. First, the loss and fragmentation of green spaces in the past 20 years were spatially identified by performing the hot spots analysis for the cell-based spatial metrics quantifying the size and diversity of green spaces. Next, seven drivers such as slope, distance to roads, land price, population density, ratios of residential, commercial, and industrial areas were selected based on the previous studies and the direction of the association between the loss and fragmentation of green spaces and seven drivers was analyzed with the stepwise logistic regression. Finally, the relative importance of the seven drivers and their interactions in the past 20 years were analyzed with the geographical detector. The results show that the loss of green spaces was concentrated on a part of the Anshim housing development district from 1989 to 2009 and green spaces were highly fragmented around the housing development districts such as Seongseo, Anshim, Dalseong-gun and Chilgok. The forces to drive the loss and fragmentation of green spaces in these areas were different at the administrative levels, but the drivers such as slope and ratios of residential and industrial areas were commonly significant. These drivers were positively correlated with largest patch index(LPI) quantifying the loss of green spaces while they were negatively correlated with Shannon's diversity index(SHDI) measuring the fragmentation of green spaces. In other words, the loss and fragmentation of urban green spaces in Daegu appeared around such regions with lower slope and lower ratios of residential and industrial areas. The relative importance of drivers for LPI was listed as ratio of industrial area, land price, and ratio of commercial area in descending order whereas that of drivers for SHDI was listed as ratio of industrial area, land price, and distance to roads in descending order. Also, the interaction between slope and ratio of residential area had a great impact on LPI and SHDI. The ratio of industrial area was a single driver to most significantly explain the loss and fragmentation of urban green spaces in Daegu in the past 20 years. The interaction between slope and ratio of residential area was greater than the independent influence of a single driver. This study will provide the base data to build a sustainable urban green policy for the city of Daegu in the near future.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.1
• /
• pp.58-70
• /
• 2020

Detour behavior on the expressway means that the driver uses the local road by passing the part of the expressway which is stagnant at the time of the traffic demand such as holidays. Since the detour rate was estimated through the survey at toll gate in the past, there was a difficulty in estimating the actual detour rate due to the small sample of the survey. In this study, we use DSRC-based route travel data to conduct empirical studies on detour patterns such as the estimation of actual detour rate, the improvement of travel time using detour road, and the correlation between traffic conditions on the expressway and detour rate. On the day of Chuseok and the day before Chuseok, the analysis of Giheung-DongtanIC→OsanIC and Seopyeongtaek IC→Walgott JC showed that the use of detour roads increased gradually during the congestion of the main line and travel time reduced when using detour roads, However, when the traffic congestion of the main line is not severe, the travel time increases when using the detour roads. The correlation between the traffic condition of the expressway and the actual detour rate has a negative correlation, which is consistent with the congestion pattern of the main line. The results of this study can be used to overcome limitations of detour pattern research based on surveys in the past and to establish a detour strategy for expressway sections where traffic demand is concentrated.

• Journal of the Korean Institute of Gas
• /
• v.19 no.1
• /
• pp.6-11
• /
• 2015

This paper is to study the examples for rubber damage and weaken reliability of timing belt, constant velocity joint boot and weather strip in vehicle. The first example, when the service man replaced the new timing-belt of rubber material, he assembled the belt that was weaken it's contact surface because of material transform. He knew the abnormally tearing failure by friction action between belt and sprocket. The second example, it certified the fact that the grease is leaked out boot protecting of constant velocity joint by split of rubber surface because of durability badness. The third example, the weather stripe took the minutely tearing because of damage produced the material transform by crack of chemistry change. It certified the production phenomenon of a tiny noise by coming with outside air because of overlapped the rubber of weather stripe when driving after closing the door. Therefore, the driver must always manage the rubber system part of vehicle.

• Journal of Korean Society of Transportation
• /
• v.17 no.1
• /
• pp.41-52
• /
• 1999

Recently, much literature has surveyed the economic effects of transportation investment, focusing on the relationship between transportation infrastructure investment and economic development. Although the conventional views assume that transportation investment stimulates economic growth, the results of recent studies are not conclusive and in some cases reject the conventional views. The contradictory results are linked with double counting Problem and Keynesian/Neo-classical economics theory. This article investigates the economic effects of road transportation with regard to freight transport using Stated Preference technique. This study examines, in particular, the value of time saving for freight which has been rarely studied in this area. In the first part, the value of time saving, excluding the value for driver and operating cost, is theoretically investigated through the model of continuous review system and periodic review system. At last, the empirical study using the Seated Preference technique shows the value of time saving for freight and the value of reliability, compared with other studies and the value of those in COBA. The result makes us conclude that road investment produces the secondary effects as well as the direct benefit such as time saving for passengers, operating cost saving. and accident cost reduction. The secondary effect includes the contribution to economic development.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.4
• /
• pp.327-333
• /
• 2016

An autonomous vehicle is a convergence of artificial intelligence and a vehicle which can drive itself while analyzing the real-time situation on a road without a driver. A lot of research achievements have been revealed through the media and Google is considered to be the best leading company in this field. The use of patent information which contains various information such as bibliographic data and information about technologies is a good way to find out the R&D direction of a company and develop a reasonable strategy. This study is aimed at investigating the direction to which Google focuses its R&D capabilities and establishing strategies for technology development. Google's patents about autonomous vehicles were collected and the degree of research bias was analyzed using Social Network Analysis based on citations indicating the quality of a patent. Based on the results, the strategies for technology development was eventually proposed. As a result, it was revealed that Google focused its R&D capabilities on the part of hardware control to make up for its lack of hardware-oriented technologies. As of now, Google obtained remarkable achievements, so it seems reasonable that last-movers consider cooperative research with Google.

• International Journal of Railway
• /
• v.1 no.4
• /
• pp.149-156
• /
• 2008

During maintenance or construction works in or at the tracks of railways, high risks for passengers and railway staff, especially for the workers on the construction site exist. The high risks result out of the movement of rail vehicles, like trains or construction vehicles, which must be faced by using any available technical and operational technologies for securing them against the environment. Therefore, it is necessary to evaluate the level of protection continuously and to identify new and innovative methods and technologies for the protection of the gang (construction worker, machines and material). Especially on construction sites at line sections with two or more parallel tracks but also with single tracks, there are still a lot of incidents and accidents mostly with seriously injured persons or fatalities. These were mainly gang members that breach the railway-loading gage. By using proper warning or protection systems, the avoidance of such accidents must be achieved. The latest developments. in gang protection systems concern on the one hand fixed barriers in the middle between the construction site and the operated track and on the other hand construction vehicles equipped with automatic warning systems. The disadvantage of such protection methods is that the gang can be warned against an approaching train but a monitoring of the gang members cannot be performed. Only one part of a potential dangerous situation will be detected. If the gang members will overhear the acoustic warning signal of the security staff and the workers will not leave the danger zone in the track, the driver of the approaching train had no chance to react to the dangerous situation. An accident is often inevitable. While the detection of acoustic warning signals by the gang members working on a construction site is very difficult, the acoustical planning of an automatic warning system has to be designed for an acoustic short range level of one meter besides the construction vehicle. The decision about the use of today's technical warning system (fixed systems, automatic warning systems, etc.) must be geared to the technical feasibility and the level of safety which is needed. Criteria for decision guidance to block a track should be developed by danger estimation and economical variables. To realize the actual jurisdiction and to minimize the hazards of railway operations by the use of construction vehicles near the tracks further developments are needed. This means, that the warning systems have to be enhanced to systems for protection, which monitor the realization of the warning signal as a precondition for giving a movement authority to a train. This method can protect against accidents caused by predictable wrongdoing. The actual state of the art technique of using a collective warning combined with additional security staff is no longer acceptable. Therefore, the Institute of Transportation System of the German Aerospace Center in Braunschweig (Germany) will develop a gang warning and protection system based upon imaging methods, with optical sensors such as video in visible and invisible ranges, radar, laser, and other. The advantage of such a system based on the possibility to monitor both the gang itself and the railway-loading gauge either of the parallel track or of the same track still in use. By monitoring both situations, the system will be able to generate a warning message for the approaching train, that there are obstacles in the track, so that the train can be stopped to prevent an accident. And also the gang workers will be warned, while they breach their area.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.3
• /
• pp.322-335
• /
• 2019

Objectives: The goal of this study is to standardize industry, process, and job within work environment measurement information. Methods: We selected 180 work environment measurement reports on 30 industries from a database monitored from 2014 to 2016 by the Korea Industrial Health Association. Ten industrial hygienists, each with over five years of experience in measurement, conducted a primary standardization of 180 reports. Two professional industrial hygienists with more than 20 years of experience each reviewed and revised the results of the primary standardization. We also examined the validity on the usefulness of the standardized database by the two industrial hygienists. Results: The final standardization results were classified into eight major categories, 23 sub-major categories, 39 minor categories, 53 unit categories and 70 sub-unit categories in the Korean Standard Industrial Classification (KSIC) 10th revision. A total of 161 processes were standardized, and there were 148 processes with K2B codes. Standard job was coded into 13 job groups including operator, automobile maintenance, nurse, maintenance, manager, excavating machine operator, forklift driver, radiologist, clinical pathologist, signer, researcher, kitchen assistant, and concrete reinforcement ironworker. Conclusions: Although the standardized information in this study may be only a part of the total information, it can be useful for improvement of the K2B system. Additional research is needed for an ongoing clean-up of data in the K2B and re-calibration and reclassification of standard processes until the future national exposure monitoring system is fully established.