• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9A
• /
• pp.801-808
• /
• 2011

We propose MBAP(Multi-rate Broadcast Active Probing) technique to get the right measurements for link quality in Wireless Mesh Network (WMN). Most routing protocols for WMN make use of link quality-aware routing metrics, such as ETX(Expected Transmission Count) and ETT(Expected Transmission Time), while the hop count is usually used in MANET (Mobile Ad-hoc NETwork). A broadcast based active proving technique is adopted in the previous studies to get the ETX or ETT of a link. However this technique does not reflect the multi-rate feature of WLAN because it uses a single fixed transmission rate for broadcast which usually differs from the actual rate used in data transmissions. MBAP overcomes this shortage by exploiting various rate broadcast frames for probing. We implement MBAP on linux system by modifying WLAN driver and related kernel sub-systems. Experimental results show that MBAP can capture link quality more accurately than the existing techniques.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.466-469
• /
• 2013

Cars that are currently available to the operator to ensure convenience and safety for electronics devices now on the market supply is developed. The current car black box of electronics service, parking, is to help when reversing. The black box is necessary at the time of the accident. After-market through a lot of these are advertised. However, these products are known only to the rear or the front of the picture, as well, at the time of driving, the accident and the front left and right lateral images of the boundary of the car can not be confirmed. Electronics devices on the market, but they can not give this problem solving. In this paper, we propose these to the algorithm-around view of the driver's operation of the vehicle after the car sideways, left and right of the room with integrated video Black Box is designed to provide.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.8
• /
• pp.544-554
• /
• 2014

In this paper, we introduce a cyber-physical intersection systems (CPIS) which intimately interconnects roadside units (RSU) located at intersection, on-board units (OBU) of moving vehicles, and smartphone apps. Based on the architecture of CPIS, we also present a green light optimal speed advisory based on the reference mobility models (GLOSA-RMM) to reduce intersection stopping time (IST) and fuel consumption. Based on several reference mobility models, the GLOSA-RMM determines the appropriate speed advisory by taking into account the current mobility and the intersection traffic light status, and then provides screen/voice GLOSA instructions to minimize the driver's distraction. We show that the GLOSA-RMM can reduce both the IST and the fuel consumption through the numerical results obtained from the prototype of the CPIS consisting of the OBU, the RSU and the smartphone app.

• Journal of the Society of Disaster Information
• /
• v.7 no.1
• /
• pp.1-11
• /
• 2011

Plans of underground roads have been established, and the possibilities of underground road constructions have been growing in Korea. However, the study on characteristics of underground roads, the enactment of law, and the establishment of design criteria haven't been conducted so far, if any. Based on these backgrounds, the paper presents the basic direction on the construction method of underground roads. It also investigates the needs and characteristics of underground roads and reviews domestic and foreign examples. Major results by implementing the research are as follows: 1) when selecting the route of underground roads, the use of underground space, technical aspects, and traffic systems should be comprehensively considered; 2) the design speed of underground roads will be 10km/h above the speed limit to secure safety; 3) disaster prevention facilities should be planned to connect high traffic management system for coping with unexpected situations. Although this study has a limitation that hasn't reflected the driver's characteristics on new spaces such as underground roads, it has some significance that it suggests the major reviewing issues on the construction of underground roads, and presents the direction through the previous study.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.547-550
• /
• 2009

This paper presents a digital based input/output interface circuit for controlling and monitoring the Diesel Engine Generator for Emergency. In order to monitor and control of the Emergency Diesel Engine Generator, controlling and monitoring circuits need 5 analog input channels, 2 pick-up coil measuring circuits, 10 digital input channels containing Broken Wire Detect function, and 7 relay control signal output channels. This system performs signal processing of input signal taking advantage of simple filter circuit, photo-coupler and comparator circuit at analog input parts, and output signals for main relay is designed acting by double control, so it prevents malfunction completely. And it improves accuracy of speed input signal by applying digital circuit that processes pick-up coil signal.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.732-741
• /
• 2018

In order to maximize the usable capacity of a BMS (battery management system) that uses several battery cells connected in series, a cell balancing technique that equips each cell with the same voltage is needed. In the active cell balancing circuit using a multi-winding transformer, a balancing circuit that transfers energy directly to the cell (cell-to-cell) is composed of a PMOS switch and a gate driving chip for driving the NMOS switch. The TLP2748 photocoupler and the TLP2745 photocoupler are required, resulting in increased cost and reduced integration. In this paper, instead of driving PMOS and NMOS switching devices by using photocoupler, we proposed 70V BCD process based PMOS gate driving circuit, NMOS gate driving circuit, PMOS gate driving circuit and NMOS gate driving circuit with improved switching time. ${\Delta}t$ of the PMOS gate drive switch with improved switching time was 8.9 ns and ${\Delta}t$ of the NMOS gate drive switch was 9.9 ns.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.535-538
• /
• 2022

For Plug & Play of IoT devices, we develop a module that recognizes the type of USB, which is a typical wired interface of IoT devices, through image recognition. In order to drive an IoT device, a driver for communication and device hardware is required. The wired interface for connecting to the IoT device is recognized by using the image obtained through the camera of smartphone shooting to recognize the corresponding communication interface. For USB, which is a most popular wired interface, types of USB are classified through artificial neural network-based machine learning. In order to secure sufficient data set of artificial neural networks, USB images are collected through the Internet, and additional image data sets are secured through image processing. In addition to the convolution neural networks, recognizers are implemented with various deep artificial neural networks, and their performance is compared and evaluated.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.3
• /
• pp.1-9
• /
• 2012

In this paper, we propose a vision-based robust vehicle detection and inter-vehicle distance estimation algorithm for driving assistance system. We use the haar-like features of car rear-shadows, as well as the edge features for detecting of vehicles. The use of additional vehicle edge features greatly reduces the false-positive errors in the vehicle detection. And, after analyzing the conventional two inter-vehicle distance estimation methods: the location-based and the vehicle width-based, an improved inter-vehicle distance estimation algorithm which has the advantage of both method is proposed. Several experimental results show the effectiveness of the proposed method.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.658-665
• /
• 2014

The neural stimulators have been employed to the visual prostheses system based on the functional electrical stimulation (FES). Due to the size limitation of the implantable device, the smaller area of the unit current driver pixel is highly desired for higher resolution current stimulation system. This paper presents a 16-channel compact current-mode neural stimulator IC with digital to analog converter (DAC) sharing scheme for artificial retinal prostheses. The individual pixel circuits in the stimulator IC share a single 6 bit DAC using the sample-and-hold scheme. The DAC sharing scheme enables the simultaneous stimulation on multiple active pixels with a single DAC while maintaining small size and low power. The layout size of the stimulator circuit with the DAC sharing scheme is reduced to be 51.98 %, compared to the conventional scheme. The stimulator IC is designed using standard $0.18{\mu}m$ 1P6M process. The chip size except the I/O cells is $437{\mu}m{\times}501{\mu}m$.

• The KIPS Transactions:PartA
• /
• v.14A no.5
• /
• pp.295-300
• /
• 2007

The Linux-based embedded systems such as mobile telephones. PDAs and MP3 players are widely in use. USB(Universal Serial Bus) is the interface for data communication between the computers and these peripheral devices. Some embedded systems like intelligent home networking and multimedia streaming require guaranteed QoS(Quality of Service), which is needed for real time transmission of UDP/IP messages through USB. Although USB Ethernet driver is supported by USB Gadget API in Linux, it is unable to provide the desirable QoS required by each type or small embedded systems due to the unpredictability or TCP/IP Stack in Linux. This paper proposes IP-Over-USB to improve QoS of UDP/IP message transmission in the embedded systems using USB in Linux system.