• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.374-375
• /
• 2019

In this paper, In the whole industry, there is a tendency to replace brushless motors with brushless motors because of the high rate of failure in DC motors with brushes. Accordingly, many methods for driving a brushless motor have been developed and studied. In order to drive the brushless motor, it is essential to know the information about the rotor position of the motor. However, it is not possible to use a position sensor for rotor disconnection due to the structure of an electric compressor brushless DC motor. In this paper, we investigate the rotor position of the motor by using the counter electromotive force included in the voltage of the terminal made by Y connection by using the resistance of each phase without using Hall sensor or encoder generally used to detect the rotor position. A sensorless drive system for a square wave brushless direct current (DC) motor is proposed. To do this, we propose a method to detect the rotor position from the analyzed terminal voltage waveform by performing terminal voltage analysis of each phase for 3-phase, 2-exciton unipolar PWM.

• International Journal of Computer Science & Network Security
• /
• v.23 no.3
• /
• pp.169-176
• /
• 2023

The vehicular ad hoc network (VANET) is currently an important approach to improve personal safety and driving comfort. ANEL is a MAC-based authentication scheme that offers all the advantages of MAC-based authentication schemes and overcomes all their limitations at the same time. In addition, the given scheme, ANEL, can achieve the security objectives such as authentication, privacy preservation, non-repudiation, etc. In addition, our scheme provides effective bio-password login, system key update, bio-password update, and other security services. Additionally, in the proposed scheme, the Trusted Authority (TA) can disclose the source driver and vehicle of each malicious message. The heavy traffic congestion increases the number of messages transmitted, some of which need to be secretly transmitted between vehicles. Therefore, ANEL requires lightweight mechanisms to overcome security challenges. To ensure security in our ANEL scheme we can use cryptographic techniques such as elliptic curve technique, session key technique, shared key technique and message authentication code technique. This article proposes a new efficient and light authentication scheme (ANEL) which consists in the protection of texts transmitted between vehicles in order not to allow a third party to know the context of the information. A detail of the mapping from text passing to elliptic curve cryptography (ECC) to the inverse mapping operation is covered in detail. Finally, an example of application of the proposed steps with an illustration

• International journal of advanced smart convergence
• /
• v.13 no.2
• /
• pp.249-257
• /
• 2024

As the main driver of economic growth and employment, the agricultural sector plays an important role in Vietnam's economy. However, in recent years, the sector has faced new challenges and also presented new investment opportunities to stimulate agricultural growth. Many Vietnamese agricultural producers currently lack the modern technology and decision support tools needed to maintain and improve productivity in a rapidly changing environment. Other stakeholders in the agricultural value chain, such as input suppliers, distributors, and consumers, also face significant challenges, including disrupted value chains, transportation costs. The cost of transporting goods across the supply chain continues to increase and information exchange remains fragmented. A potential solution to address these challenges is the application of digital transformation in agricultural supply chains. Farmers and other value chain participants can improve the production of their goods and procedures by utilizing new and cutting-edge technologies that are integrated into a unified system as part of the digital transformation of agricultural supply chains. In this study, we evaluate the current status of digital transformation in the supply chain of the agriculture industry by finding and examining pertinent publications from key agencies as well as prior research. From there, in the framework of the digital economy, this study suggests a digital transformation roadmap for the agricultural supply chain.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.1
• /
• pp.41-48
• /
• 2008

Enhanced machine reliability has dramatically reduced the rate and number of railway accidents but for further reduction human error should be considered together that accounts for about 20% of the accidents. Therefore, the objective of this study was to suggest a new taxonomy of performance shaping factors (PSFs) that could be utilized to identify the causes of a human error associated with railway accidents. Four categories of human factor, task factor, environment factor, and organization factor and 14 sub-categories of physical state, psychological state, knowledge/experience/ability, information/communication, regulation/procedure, specific character of task, infrastructure, device/MMI, working environment, external environment, education, direction/management, system/atmosphere, and welfare/opportunity along with 131 specific factors was suggested by carefully reviewing 8 representative published taxonomy of Casualty Analysis Methodology for Maritime Operations (CASMET), Cognitive Reliability and Error Analysis Method (CREAM), Human Factors Analysis and Classification System (HFACS), Integrated Safety Investigation Methodology (ISIM), Korea-Human Performance Enhancement System (K-HPES), Rail safety and Standards Board (RSSB), $TapRoot^{(R)}$, and Technique for Retrospective and Predictive Analysis of Cognitive Errors (TRACEr). Then these were applied to the case of the railway accident occurred between Komo and Kyungsan stations in 2003 for verification. Both cause decision chart and why-because tree were developed and modified to aid the analyst to find causal factors from the suggested taxonomy. The taxonomy was well suited so that eight causes were found to explain the driver's error in the accident. The taxonomy of PSFs suggested in this study could cover from latent factors to direct causes of human errors related with railway accidents with systematic categorization.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.2
• /
• pp.102-116
• /
• 2021

For the safe operation of autonomous vehicles, the representative technology of the 4^th industrial revolution era, a combination of various technologies such as sensor technology, software technology and car technology is required. An autonomous vehicle is a vehicle that recognizes current location and situation by using the various sensors, and makes its own decisions without depending on the driver. Perfect recognition technology is required for fully autonomous driving. Since the precise road maps provide various road information including lanes, stop lines, traffic lights and crosswalks, it is possible to minimize the cognitive errors that occur in autonomous vehicles by using the precise road maps with location information of the road facilities. In this study, the definition, necessity and technical trends of the precise road map have been analyzed, and the HD(High Definition) map prototype based on the web GIS has been built in the autonomous driving-specialized areas of Daegu Metropolitan City(Suseong Medical District, about 24km), the Happy City of Sejong Special Self-Governing City(about 33km), and the FMTC(Future Mobility Technical Center) PG(Proving Ground) of Seoul National University Siheung Campus using the MMS(Mobile Mapping System) surveying results given by the National Geographic Information Institute. In future research, the built-in precise road map service will be installed in the autonomous vehicles and control systems to verify the real-time locations and its location correction algorithm.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.210-216
• /
• 2014

In this paper, it was proposed to develop front and rear image monitoring system for vehicle that help a driver to cope with urgent situation about a dangerous element. When parking a vehicle, the risk factors to be formed by the dead zone can be resolved by using anterior and posterior cameras of the vehicle. In embedded system environment, a SoC(System on Chip) and two high-resolution CMOS (Complementary metal-oxide-semiconductor) image sensors were used to transfer two high-resolution image data through he TCP/ IP-based network. To transfer image data through he TCP/ IP-based network, the images received by two cameras were compressed by using H.264 and they were transmitted with wireless method(Wi-Fi) by using real-time transport protocol (Real-time Transport Protocol). Transmission loss, transmission delay and transmission limit were solved in wireless (Wi-Fi) environment and the bit-rate of two image data compressed by H.264 was adjusted. And the system for the optimal transmission in wireless (Wi-Fi) environment was materialized and experimented.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.282-289
• /
• 2019

Reflective and solar LED road studs are being used as a way of securing visibility for road environments. Road markers have various advantages and disadvantages in terms of versatility, efficiency, simplicity and visibility as individual products of reflective type and solar LED. However, in addition to the above, it is possible to prevent secondary accident after accident, It has a common drawback that it is difficult to have. In this paper, we propose a road stud system incorporating a wireless control function using RF - based communication with existing solar LED road studs and a system for controlling them. The proposed system is called the smart road stud system and it can control the equipment through the central control unit and the relay unit connected to the central control room by incorporating the RF communication function in the existing solar LED road stud. In addition, since it is possible to control the lighting method, color, etc. according to the road condition, it is possible to provide the driver with the state of the road to perform the function for preventing the second accident after the accident. It also adds features that minimize the ongoing power consumption of LED and RF communications. In order to verify the validity of the proposed system, prototypes were produced and it was confirmed that it is possible to act as a university for prevention of accident after accident by linking with other traffic system besides accident prevention function by securing existing visibility.

• The Journal of Society for e-Business Studies
• /
• v.13 no.4
• /
• pp.125-144
• /
• 2008

Recently, the main concerns of enterprise management activities is how to strengthen the competitiveness to quickly respond to changes and sustain the growth in business environment. As IT(Information Technology) has become to be viewed as a key driver for the business competitiveness, new paradigms, such as business and IT alignment, IT-driven product/service innovation and so on, are regarded as the hot topic in many industries. However, previous studies related to IT evaluation, which is more critical than any other IT activities, have focused on quantitative IT deployment, utilization and its economical effects. Therefore, this study presents the newly-developed evaluation domains and items based on four pairs of relative concepts in industrial informatization, and their multi-dimensional analysis methodology which explains various types of IT characteristics of enterprises. And finally, pilot tests at 2 companies in financial service sector will be performed in order to verify the practicality of the evaluation system.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.1
• /
• pp.40-49
• /
• 2007

In a visual driver-assistance system, separating moving objects from fixed objects are an important problem to maintain multiple hypothesis for the state. Color and edge-based tracker can often be 'distracted' causing them to track the wrong object. Many researchers have dealt with this problem by using multiple features, as it is unlikely that all will be distracted at the same time. In this paper, we improve the accuracy and robustness of real-time tracking by combining a color histogram feature with a brightness of Optical Flow-based feature under a Sequential Monte Carlo framework. And it is also excepted from Tracking as time goes on, reducing density by Adaptive Particles Number in case of the fixed object. This new framework makes two main contributions. The one is about the prediction framework which separating moving objects from fixed objects and the other is about measurement framework to get a information from the visual data under a partial occlusion.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.97-100
• /
• 2010

Lately, becausing Life, property loss from car accident, vehicles have been used vehicle blackbox like blackbox by airplane. when the accident happened, existing car blackbox that was stored external image or video of vehicle don't know the vehicle's driving conditions. For knowing vehicle's driving conditions, vehicle is loaded sensors for Variety of measurement and control. the sensors is controlled by ECU(Electronic Control Unit) and all vehicles is used Mandatory OBD2(On-board diagnostics) protocol for communication between ECUs since 2006. Using ODB2 protocol, driver use blackbox data by various driving data to occur vehicle' ECU and can be obtained more definitive information. In this paper, there implement smart blackbox system to use exact vehicle's data using OBD2 protocol rather than blackbox to store external image or video.