• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.3
• /
• pp.39-44
• /
• 2018

The automotive headrest is intended to provide comfort, safety, convenience and durability to a vehicle's passengers and driver. In this study, impact and fatigue analyses were carried out for three headrest shape models-A, B and C. These models have the same material properties and the same force was applied to them. Impact and fatigue analyses demonstrated that all of the models obtained almost the exact same result values. This study found that all models had similar equivalent stress, deformation, fatigue life and main damage parts due to the fact that the shared same material properties. Better safety and fatigue life can be anticipated by changing the material of the headrest in order to secure more stable safety. An automotive headrest optimized for safety and durability is thought to have been developed through the impact and fatigue analyses of this study.

• Journal of computational fluids engineering
• /
• v.17 no.4
• /
• pp.24-31
• /
• 2012

Effects of the subgrid length-scale in the Delayed-Detached Eddy Simulation(DDES) are investigated based on the Spalart-Allmaras(S-A) and the k-$\omega$ Shear Stress Transport(SST) turbulence models. Driver & Seegmiller's experimental results are used to validate numerical results. Grid convergence with grid resolution and subgrid length-scale is investigated. The simulation results show that the volume method for the subgrid length-scale is more resistant to unfavorable effects of the grid size in the periodic direction than the maximum method. Using a sufficient grid resolution and an appropriate subgrid length-scale, both S-A based DDES and SST based DDES methods can provide a good correlation with the experimental data.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.177-183
• /
• 2011

VES-LMC(very-early strength latex modified concrete) has been widely used as repair material for bridge deck overlay or rehabilitation, because it could be opened to the traffic after 3 hours of curing. However, the bright color of VES-LMC disturb driver's sigh. A black VES-LMC, matching to asphalt concrete, was developed and applied at a filed for driver's comfort and safety. The black VES-LMC included 2% carbon black in cement weight ratio. A series of performance evaluation for black VES-LMC was done in terms of field applicability, pavement color and temperature change. The field applicability test result showed that there were no change of workability, slump and air void, and the compressive strengthen developed more than 20MPa after 4 hours of placement. The thermal stress of black VES-LMC was smaller than that of OPC and asphalt concrete, which means the stability of black VES-LMC. The performance evaluation result showed that the black VES-LMC could prevent road icing at below zero temperatures and promote thawing at melting temperature.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.2
• /
• pp.111-121
• /
• 1999

This paper deals with an active gate drive (AGD) technolo밍T for high power IGBTs. It is based on an optimal c combination of several requirements necessmy for good switching performance under hard switching conditions, The s scheme specifically combines together the slow drive requirements for low noise and switching stress and the fast driver requirements for high speed switching and low switching energy loss The gate drive can also effectively dampen oscillations during low cunent turnlongrightarrowon transient in the IGBT, This paper looks at the conflicting requirements of the c conventional gate dlive circuit design and the experimental results show that the proposed threelongleftarrowstage active gate dlive t technique can be an effective solution.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.56-60
• /
• 2006

We review our studies on the growth of microcrystalline silicon films by the standard PECVD technique. In situ spectroscopic ellipsometry studies allow the optimization of the complex film structure with respect to competing aspects of the growth process. Fine tuning the hydrogen flux, the ion energy, and the nature of the species contributing to deposition produces unique films with a fully crystallized interface with silicon nitride. These materials have been successfully incorporated in bottom gate TFTs which present mobility values in the range of 1 to 3 $cm^2/V.s$, and stable characteristics when submitted to a bias stress. The stability of these TFTs makes them suitable for driver applications in AMLCDs as well as pixel elements in OLED displays.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.4
• /
• pp.145-151
• /
• 2014

Modern vehicle has a lot of ECU(Electronic Control Unit) products to control many parts such as engine, transmission, brake, body and so on. ECU quality is one of important factors related to vehicle quality and driver's safety. Based on Bath-tub curve which presents failure rate during product lifetime, we designed and applied Accelerated Run-in Test into manufacturing line by simulating stress amount to ECU and developing the required software and efficient test equipment for mass production. This test makes ECU products stressed through electrical and thermal stresses under excessive driving condition, which induce potential initial failure of components in the ECU during production. The outcome until these days proved that Acceleration Run-in Test have reduced initial failure rates and increased quality of ECU products in the field outstandingly.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.473-478
• /
• 2003

The hydraulic buffer stop placed on the end of the railway brakes the train could not reduce the velocity sufficiently because of the braking system troubles or driver's mistakes. The hydraulic buffer stop is composed of 2 operating parts; hydraulic buffers and rail clamps. Hydraulic buffers brake trains non-destructively in low speed, otherwise rail clamps begin to work in higher speed. In this paper, The braking process of the hydraulic buffer stop is investigated by numerical methods. The hydraulic buffer is numerically analyzed and designed to absorb the kinematic energy of the train below 3.2km/h speed. The hydraulic buffer stop crushed by the train with 5km/h speed is analyzed by FEM package-PAM CRASH in order to obtain the stress profile in rail clamps and buffer stop frame.

• Journal of the Korean Society for Railway
• /
• v.14 no.5
• /
• pp.442-451
• /
• 2011

The purpose of this article is to find out and analyze the diverse factors that are incurring stress to the railway drivers, and to depict the moderating effects of personality factors(Locus of Control, Self-Efficacy, and Organization-Based Self Esteem) on the causal relationship between job stressors and job satisfaction in two groups(drivers who experienced accidents and drivers who did not). To attain this purpose, the 212 questionnaires received from the drivers of KORAIL, Seoul Metro, and Seoul Metropolitan Rapid Transit. Most crucial finding was that certain aspects of a driver's personalities measured by locus of control, self-efficacy, and organization-based self esteem showed significant moderating effects in predicting the level of job satisfaction, job stress and accidents. This result implies that the drastic testing of personality factors is so important when staffing drivers in the future.

• Korean Journal of Culture and Social Issue
• /
• v.14 no.3
• /
• pp.21-40
• /
• 2008

This study was intended to validate and develop the driving stress scale. In a preliminary investigation, literature studies on the stress and open questionnaire were administered and examined in four regions in Korea. As a result, 121 items driving stress questionnaire were developed. In the study, this driving stress questionnaire was examined to 450 drivers located seven regions in Korea. The factors analysis revealed 5 meaningful factors[(Progress Obstacle: PO), (Traffic Circumstance: TC), (Accident & Regulation: AR), (Regulation Observance: RO), (Time Pressure: TP)] with 38 items. When internal consistency for each 5 factor was calculated, all sub-scale revealed a satisfactory level of Cronbach's α. Also, correlations with Driving Behaviour Inventory-General Driver Stress(DBI-GEN) and risk driving behaviors(speed driving, drunken driving, offence accident, defence accident) supported consistently validity of the Driving Stress Scale(DSS). Finally the result were discussed and implications are suggested for future studies.

• Journal of the Korea Convergence Society
• /
• v.9 no.8
• /
• pp.155-160
• /
• 2018

Automotive seat is a part to supply the convenience and safety of driver at driving. Recently, the seat has the role to protect driver from the outside impact or vibration and give the convenience except such a usage as chair. The design on structural function of the seat frame is important like the impact safety and durability. In this study, the seat is designed by adding one hollow rod to the part of seat back frame in order to enhance the structural safety and durability. This study was carried out by using CATIA and ANSYS as the design and analysis programs. As this study result through the structural and vibrational analyses, model 4 was seen to have the durability more superior than the other models. By utilizing this result, it is thought to be the useful material at designing the automotive seat frame with durability. It is possible to be grafted onto the convergence technique at the automotive seat frame and show the esthetic sense.