• Journal of Veterinary Clinics
• /
• v.33 no.5
• /
• pp.310-312
• /
• 2016

An 8-month-old, intact male Collie and a 4-year-old, intact male Siberian husky presented with severe wounds on the limbs. Although the wounds were not managed adequately before presentation, there were no remarkable findings except for secondary infections. The lesions were cleaned with a disinfectant and then treated with systemic antibiotics. Additionally, a hydrophilic moisture-absorbing polyurethane dressing was applied to the limbs because a conventional bandage with silver sulfadiazine ointment was not effective. Both cases showed significant improvement in the lesions over a short period of time. These cases show that a bioactive dressing works efficiently to heal refractory wounds in dogs.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.9
• /
• pp.1531-1540
• /
• 1997

Mordern industrial society pursues unmanned system and automation of manufacturing process. Abreast with this tendensy, production of goods which requires advanced accuracy is increasing as well. According to this, the work sensing time of dressing by monitoring and diagnosing the condition of grinding, which is th representative way in accurate manufacturing, is an important work to prevent serious damages which affect grinding process or products by wearing grinding wheel. Computer vision system was composed, so that grinding wheel surface was acquired by CCD camera and the change of cutting edge ratio was measured. Then we used automatic thresholding technique from histogram as a way of dividing grinding cutting edge from grinding surface. As a result, we are trying to approach unmanned system and automation by deciding more accurate time of dressing and by visualizing behavior of grinding wheel by making use of computer vision.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.4
• /
• pp.62-67
• /
• 2000

The dressing time monitoring in cylindrical grinding is very important with respect to machining efficiency. Therefore, the purpose of this paper is to determine the wheel life by monitoring behavior of grinding power for WA, 19A and GC. For this purpose , we investigated indirectly the attritious wear of grain edge, the loading of grinding wheel and the breakage of grain through the grinding power and the surface roughness under various grinding conditions. From obtained the results, the relationship between the wheel life and the average sectional chip area is examined to guide for the determination of dressing time.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.10a
• /
• pp.293-298
• /
• 1998

In surface grinding, the conditions of the grinding wheel give a significant effect on the ground workpieces comparing with other metal removal processes. In this paper, to assist the development, a non-contacting optical method is introduced to make in-process measurements of scattering intensities from laser beam during surface grinding processes. This show indications of changes in surface texture of wheel working surfaces. Also, in order to determine the dressing time monitoring method of grinding wheel in surface grinding, a three-dimensional computer simulation of the grinding operation has been attempted based on the contact mechanism and surface-shaping system between the grinding wheel and the workpiece. The optical dressing time is determined based on the amount of the grain wear and work surface roughness.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.125-130
• /
• 1994

Recently,manufacturing work been transformed to small acale production from with various items to act up to user's expectation from mass production with a little items required in the past. The FMS using NC type mother machinaries has been applied actively also in domestic manufacturing line to meet thus tendancy, but there are many machining troubles occured in work process not be settled yet. Nowdays high efficiency has been required no less than high precision in grinding work for the improvement of productivity. In this study, to represent more advanced FMS can be adapted to thus situation In-process type monitoring method using AE and Current sensors is suggested to investigatethe machining condition in grinding process. As results from this experimental study, is is recoqnized well that grinding conditions and dressing point of in time can be estimated effectively using monitoring method suggested. Furthermore, surface shape of grinding wheel on voluntary point of in time can be predicted indirectly through the observation and comparison of AE signal waveform obtained as performance of continuous dressing work.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2001.11b
• /
• pp.49-61
• /
• 2001

This study was carried out to determine the effect of various fertilizer levels, sowing time and planting density on the growth and yield of Scuteliaria baicalensis GEORGE cultivated after the barley in the southern coastal areas of Korea under the non- mulching condition by direct sowing culture. The flowering date of medium dressing plot(N : P$_2$O$\sub$5/ : K$_2$O=9 : 13.5 : 9kg/10a) and heavy dression plot(N : P$_2$O$\sub$5/, : K$_2$O=12 :18 : 12kg/10a) were July 23. The flowering date of the medium and the heavy dressing plot was delayed by 3days compared with that of non-fertilizing plot. The growth characteristics such as stem length, diameter of main stem, number of branch per plant, main root length, main root length, main root thickness and dry weight of stem leaves were more increased at medium dressing plot than that of other fertilizer levels, The root dry weight of in Scutellaria baicalensis GEORGE cultivated after barley was hlghest at the fertilizing plot of N : P$_2$O$\sub$5/ : K$_2$O=9 : 13.5 : 9kg/10a. The dried-root yield was 178kg in medium dressing plot, 167kg in standard dressing pot, and 126kg in non-dressing plot, The dried-root yield of medium dressing plot was 7% and 41 cie higher than that of standard dressing pot and non-dressing control plot, respectively. Emergence and flowering dates in the sowing time of June 1 were earlier than those of the other sowing times. In the sowing time of June 1, length and diameter of main stem, number of node per main stem, number of branch per plant and dry weight of stem leaves were greater than those of sowing times of June 10 and June 20. Yield components such as main stem length and diameter, main stem numbers, branches per plant, dry weight of stem leaves, main root length and thickness, number of large root and fine root per plant, and dry weight of root were the highest at the sewing time of June 1 as the yield of 71.3kg/10a. Optimum sowing time of Scuteilaria baicaiensis GEORGE cultivated after barley was June 1 in southern areas of Korea. Stem length was long in dense planting of 20${\times}$10cm and short in spacious planting of 30${\times}$10cm and 40${\times}$10cm by direct sowing cultivated after barley. Stem diameter was thick in spacious planting of 30${\times}$10cm and 40${\times}$10cm and was thin in dense planting of 20${\times}$10cm by direct sowing cultivated after barley. Length and dry weight of root per plant were decreased in dense planting of 20${\times}$10cm and were increased in spacious planting of 30${\times}$10cm and 40${\times}$10cm by direct sowing cultivated after barley. Yield of dry root was highest in optimum planting density(30${\times}$10cm 33 plants/㎡) by direct sowing cultivated after barley. The correlation coefficient between number of planting plant and stem length showed highly positive correlation. These characters of stem diameter, number of branches, main root length and yield of dry root mentioned above showed negative correlations with planting plants.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.2
• /
• pp.113-118
• /
• 1974

A study was carried out to investigate the effect of application time of fertilizer nitrogen on its rate of uptake and its distribution in rice plant. The rate of applied fertilizer was 100kg/ha, as a single application at transplanting time and four equal split applications of 25kg/ha was applied at transplanting time, 3 weeks after transplanting, 1 week before the primodial initiation stage of growth and at the flag leaf stage of growth, respectively. The ammonium sulfate was labelled with N-15, as 1% atom excess for single application and 4.4% atom excess for split applications. The results are sumarized as follows: 1. The effect of split application of nitrogen on yield was observed. The yield of brown rice of the single application at transplanting time was 3.1 ton/ha and the split application was 3.4 ton/ha. However, without nitrogen the yield was reduced to 1.9 ton/ha. 2. The number of grains per panicle and 1000 grains weight were increased as split application of nitrogen, but for the number of panicles per hill and maturing rate, the single application of nitrogen revealed favorable results. 3. The rate of uptake of applied fertilizer nitrogen showed a tendency that the efficiency of fertilizer nitrogen increased by top dressing. The rate of uptake of applied nitrogen as basal application, first top dressing, second top dressing and third top dressing was 28%, 33% 51% and 63%, respectively. 4. After shooting stage of the growth, nitrogen in straws transfered to grains. The nitrogen applied at flag leaf stage was absorbed by root and easily accumulated in grains rather than straw.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.10 no.3
• /
• pp.152-157
• /
• 1990

To find out the effect of different patterns of nitrogen and potassium distribution on dry matter yield and botanical composition of temperate pastures, a field experiment was conducted with 6 treatments replicated 3 times in a randomized complete block design. It was lasted from September, 1986 to October, 1989 at the Livestock Experiment Station in Suweon. The results obtained are summarized as follows: 1. In early spring, winter hardiness, growth vigour, cold damage and coverage of grasses with 30% dressing of the total amount of N and K20 fertilizer in spring and at the 4th cutting time respectively were better than those of the other treatments. 2. Average dry matter yield for 3 years with heavy dressing in spring and at the 1st cutting time(l1, 187 kg DM/ha) was much more increased by 9% than that of the equally fertilized treatment(l0,24lkg DM/ha). 3. Changes in the botanical composition showed, in general, the same tendency for all treatments except equal N and K20 distribution. However, grassland vegetation with heavy dressing in spring and at the 1st cutting time was changed into relatively good botanical composition with 76.7% grasses, 22.3% legumes and 1.0% herbs at the end of the experiment. 4. By DM yield and botanical composition treatment 3(40-30-15-0-1570) seemed to be an optimal nitrogen and potassium distribution pattern in a temperate pasture.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.10 no.3
• /
• pp.179-182
• /
• 1990

This experiment was carried out to determine the proper application time of nitrogen (N) and potassium ($K_2O$) as a additional fertilizer in corn cultivation at Taekwalyong alpine area.Two varieties of silage corn (cv. Suwon 19 and Kangwon local var.) were grown under different top dressing time (4-leaf, 7 leaf and 10-leaf stage) in 1989.Kangwon local variety produced more leaf area and higher dry matter yield than Suwon 19. However,there was no describle differences among application time of N and $K_2O$ fertilizer in both Suwon 19 and Kangwon local variety.

• Archives of Plastic Surgery
• /
• v.36 no.4
• /
• pp.432-436
• /
• 2009

Purpose: Negative pressure therapy has been used in various conditions to promote wound healing. It has also been used to secure a skin graft by improving microcirculation and improving tight adhesion between the graft and the recipient bed. To reduce post burn scar contracture and improve aesthetical result, many types of dermal substitutes have been invented and used widely. The goal of this study was evaluate usefulness of the VAC (Kinetic concepts Inc., San Antonio, TX) in improving the take rate and time to incorporation of Integra$^{(R)}$ in reconstruction of burn scar contracture. Methods: A retrospective study was performed from October, 2006 to December, 2008. The VAC was utilized for 11 patients. The average patient's age was 19.7 years (range 5 - 27) and average surface area was $785cm^2$ (range 24 - 1600). The burn scars were excised deep into normal subcutaneous tissue to achieve complete release of the scar, Integra$^{(R)}$ was sutured in place with skin staple와 Steri - strip$^{(R)}$. Then slit incisions were made on silicone sheet only with No.11 blade for effective drainage. The VAC was used as a bolster dressing over Integra$^{(R)}$. Negative - Pressure ranging from 100 to 125 mm Hg was applied to black polyurethane foam sponge trimmed to the appropriate wound size. An occlusive seal over the black polyurethane foam sponge was maintained by a combination of the occlusive dressing, OP - site$^{(R)}$. The VAC dressing changes were performed every 3 or 4 days until adequate incorporation was obtained. The neodermis appeared slightly yellow to orange color. When the Integra$^{(R)}$ deemed clinically incorporated, The VAC was removed and take was estimated with visual inspection. Very thin STSG(0.006 ~ 0.008 inches) was performed after silicone sheet removal. Result: The mean time for clinically assessed incorporation of Integra$^{(R)}$ was 10.00 days (range 9 - 12). The mean dressing change was 3.5 times until take was obtained. In All patients, Integra$^{(R)}$ had successful incorporation in tissue without serious complications. Conclusion: Integra$^{(R)}$ in combination with Vacuum - Assisted Closure(VAC) may be incorporated earlier than conventional dressing method.