• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.159-162
• /
• 1999

This study has been performed to investigate forming limit of PCM(Pre-Coated Metal) widely using appliances. Die set was made for deep drawing test and some PCMs were inrectangular deep drawing test in no-lubricant 20% clearance some die materials(STD11(TiCN) STD11(HrC60) STD11(TD) AMOCO and 6mm/sec punch speed. and Ericshen test was performed in regular conditions In this experiment forming limit forming characteistics superior die materials and fracture of PCMs been investigated. In results tested PCMs have lower forming limit than base material because lower elongation ultimate strength than base material And two-fracture types - occurring band and flaking - of PCMs have been investiqated.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.440-443
• /
• 2005

Recently the usage of galvanealed steel sheet was increased in order to protect corrosion in automobile industry. So, the alternative of steel sheet was investigated in a point of formability. Generally it was known that uncoated steel sheet has better mechanical properties than coated steel sheet. But, contrary results were sometimes occurred in workplace. This reason is the effect of friction. In this study, the formability of steel sheet considering friction characteristics was investigated with tensile test, cup drawing test and finite element method.

• Journal of The Korean Association For Science Education
• /
• v.27 no.1
• /
• pp.28-36
• /
• 2007

This study investigated the influences of small group discussion and students' visual learning style in learning chemical concepts with drawing and writing as methods to assist students in connecting and integrating multiple external representations. Seventh graders (N=449) at a coed middle school were assigned to individual drawing (ID), pair drawing (PD), individual writing (IW), and pair writing (PW) groups. All students learned "Boyle's Law" and "Charles's Law" for two class periods. Analyses of the results revealed that the students in the PD group, regardless of students' visual learning style, scored significantly higher than those in the ID group in a conception test. The scores of the students with strong visual learning preference in the PW group were significantly higher than those in the IW group in the conception test, while the scores of the students with weak visual learning preference were not significantly different between the two groups. Although the conception test scores of the PD group were higher than those of the PW group, the difference was relatively small. It was found that most students in both PD and PW groups perceived pair drawing and pair writing positively upon cognitive and motivational aspects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4612-4618
• /
• 2012

The purpose of this study was to analyze the reliability and validity of CDT as a screening tool for cognitive impairment for stroke clients living in local community. Two evaluator assessed 51 clients' cognitive function using CDT and K-MMSE from October 2010 to August 2011 year. The researcher analyzed test-retest reliability, interrater reliability, construct validity, construct validity. The test-retest and interrater reliability was higher than .54(p<.01). The construct validity and concurrent validity was statistically significant(p<.01). So, The CDT using productive method and scoring system of Freedman et al., may be applied to screen cognitive impairment of clients with stroke.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1127-1132
• /
• 2003

Suspension system of vehicle have enough endurance during its life time to protect passenger. Spring is one of major part of vehicle. Thus, a fatigue strength evaluation for leaf spring based on road load response was carried out. At first, strain of leaf spring is measured on the city condition and proving ground condition. And next, the damage analysis of road load response data was carried out. And fatigue test of leaf spring were also carried out. Based on -N life relation, fatigue life of leaf spring was evaluated at belgian mode, city mode and drawing test specification. After that, it is compared the design life of leaf spring and evaluated fatigue life by belgian mode, city mode and drawing test specification. From the above, the maximum load-fatigue life relation of leaf spring was defined by test. and new test target of belgian mode and city mode was proposed to accept design specification of leaf spring. It is expect that proposed test target can verify leaf spring fatigue endurance at specific road condition.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.231-232
• /
• 2006

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.04a
• /
• pp.26-29
• /
• 2000

drawbead expert models are developed for calculating drawbead restraining force and drawbead-exit thinnings which are boundary conditions in FEM stamping simulation employing the linear multiple regression method by which the deviation of drawing characteristics between drawing test and mathematical model is minimized. In order to show the efficiency and accuracy of an expert drawbead model a finite element simulation of auto-body panel stamping is carried out. The finite element simulation shows that the expert drawbead model provides the accurate solution guarantees the stable convergence and the merit in the computation time.

• Journal of Biosystems Engineering
• /
• v.41 no.3
• /
• pp.170-176
• /
• 2016

Purpose: This study aimed to improve the method for determining the position of the center of gravity for agricultural tractors. Methods: The proposed method uses trigonometric functions and coordinate transformation. Data were measured according to the ISO 789-6 test procedures for the center of gravity of agricultural tractors. The height calculated using the proposed method was compared with that determined from an AutoCAD drawing. To find the center of gravity of the tractor, the algorithm for finding the intersection of the two lines was used. Results: The vertical height from the ground to the center of gravity is 682.06 mm. The vertical coordinates obtained from the calculation and the drawing were the same. Conclusions: The developed method uses trigonometric and polar coordinate transformation. The method was compared and verified with the AutoCAD drawing results. The results indicate that users can apply this developed method instead of the plotting method which is an inconvenient and time-consuming. Further, users can program Microsoft Excel to easily determine the vertical coordinate. In addition, researchers will propose this method to the ISO as a standard method for determining the center of gravity in accordance with ISO 789-6.

• Korean Journal of Schizophrenia Research
• /
• v.23 no.1
• /
• pp.15-28
• /
• 2020

Objectives: This study investigated the relationship between clock-drawing test (CDT) performance and neuropsychological functions in patients with chronic schizophrenia. Methods: Thirty-one patients with schizophrenia and 30 healthy controls participated in this study. The CDT was administered in three conditions and analyzed using both quantitative and qualitative scoring systems. Comprehensive neuropsychological tests were administered. Results: The results of the quantitative analysis showed that the schizophrenia group performed significantly worse in all three conditions of the CDT compared with the control group. However, no significant differences were observed between the two groups, when the IQ and educational level were controlled. The qualitative analysis showed that the schizophrenia group exhibited significantly more errors in "graphic difficulty" compared with the control group. In addition, CDT quantitative scores were significantly correlated with visuospatial function, memory, attention and executive functions in patients with schizophrenia. Conversely, each qualitative error type was correlated with specific cognitive domains. Furthermore, "graphic difficulty" and "spatial/planning deficit" were identified as predictors of depression symptoms in patients with schizophrenia. Conclusion: The present study demonstrated that the CDT is useful for assessing cognitive dysfunctions in patients with schizophrenia, while qualitative analyses provide more specific information about cognitive deficits compared with quantitative analyses.

• Transactions of Materials Processing
• /
• v.7 no.5
• /
• pp.445-449
• /
• 1998

In order to obtain optimum process variables during the drawing of stainless steel sheets rectangular cup drawing tests were carried out with several technically available stainless steel sheets. As parameters on testing materials for die and punches lubrication and blank holding forces were selected. Testing parameters played an important role if the deformed material was thin. Effect of material properties on the deformation behaviors was also discussed by using testing parameters selected in this experiment. From the test results we suggest the appropriate conditions to be applicable to the actual manufacturing processes