• Journal of The Korean Digital Architecture Interior Association
• /
• v.2 no.1
• /
• pp.9-15
• /
• 2002

As architectural forms tend to be large-scaled, high-storied and complicated, use of computer for processing design information has been generalized. However, CAD use in the process of developing architectural design has been neglected greatly in the educational field of architectural field due to the surging of recognition that it may limit the essential property of architectural design. It may be resulted from the limitation of CAD system, that is, it is because of tardy speed of application development for the related areas with the lack of simplicity and clarity of flexibility to be secured on the drawing and user interface. Recent CAD systems, however, overcome such a limitation, convert into object-based design from entity-based drawing, drafting and modeling for implementing design concept of architects and it connects with internet linked to superspeed information communication network and changes process and stream of architectural design. Therefore, this study deals with utility of object based CAD system with products of Autodesk Co. and consequently obtain the following conclusions. First, it expands architect's design areas by supporting cooperative design system based on model-based architectural design and internet. Second, it reduces consumption of personal and material resources and time in the process of drawing production for improving architectural design works. Third, it can reduce the frequent design changes by improving understanding of architectural space with visualization of immediate 3D information, escaping from traditional methods to deliver design information to building owner through 2D drawing or model and perspective drawing requiring much cost and time. Fourth, it keeps exactness without omission or duplication of design information and generate and renew information of all related drawings on a drawing. Fifth, it is possible to change difficult and boring architectural design work into a pleasure owing to immediate modeling and drawing of design idea. In addition, digital drawing generated by using object-based CAD system can playa role of establishing Urban Information System to be used for protecting from building in disaster and urban disasters in connection with GIS numerical map and be used for reference of all kinds of information required fro post-management of buildings. However, what is more important is that surplus time from introduction of object-based CAD system should be used for consideration to be recognized as a good space and building built as a product of this project for comfort to urban people.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.1
• /
• pp.43-50
• /
• 1996

From a manufacturing standpoint it would be desirable to monitor the degradation of drawing die, that is essential for the maintenance of die quality, the evaluation of product integrity and the reducing scrap. Acoustic emission is powerful method in monitoring fine wire drawing process, especially in detecting the die fracture at early stage. Experiments also suggested that acoustic emission sigals contained valuable information regarding the stage of a drawing process such as the surface appearance of products and the condition of lubrication. These informations are AE monitoring techniques a possible tool in monitoring the drawing process operation. In order to approach this, this paper discusses the nature of acoustic emission signal presented which illustrate the effects of wire and die material, lubricants, and drawing speed on the generation and the mean voltage level of acoustic emission signal. From these experimental, results, we understanded controlling factors of acoustic emission generation.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.4
• /
• pp.315-324
• /
• 2004

The purpose of this study is to suggest the way of automatic building code checking for architectural drawings in the web environment to enhance the utility of CALS/EC standard drawings and efficiency of construction industry business. To fulfil this aim, the authors seek to standardize the architectural drawing automatic checking system by linked drawing information to the STEP based CALS/EC standard format. Therefore, the automatic building code checking system can represent a way of utilizing the relationship between the construction CALS/EC standard drawings and the related study as well as improve the efficient of the construction work by sharing a variety of drawing information.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05a
• /
• pp.269-272
• /
• 2003

그레이팅이라는 금속제품의 자동 설계 시스템인 GDS (Grating automatic Drawing System)는 기본 설계 도면(Plan Drawing)의 정보들을 바탕으로 여러 세부 도면들을 자동 생성하는 시스템이다. 그러나 GDS를 통해 자동 생성된 도면은 설계자들의 일반적인 치수기입 요령을 부분적으로 만족시키지 못하고 있으며 또 치수 표시간의 겹침 현상이 발생하여 설계자가 도면을 수정해야 하는 번거로움이 있었다. 본 논문은 이러한 문제점을 해결하기 위해, 설계 전문가들의 치수 표시법을 지식으로 하여 규칙 기반 전문가 시스템을 구성하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.2
• /
• pp.125-132
• /
• 2014

In this paper, we present marker-less fingertip and brush tracking system with inexpensive web camera. Parallel computation using CUDA is applied to the tracking system. This tracking system can run on inexpensive environment such as a laptop or a desktop and support for real-time application. We also present realistic water-based sign pen drawing model and implementation. The realistic drawing application with our inexpensive real-time fingertip and brush tracking system shows us the art class of the future. The realistic drawing application, along with our inexpensive real-time fingertip and brush tracking system, would be utilized in test-bed for the future high-technology education environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.1
• /
• pp.41-53
• /
• 1988

Line drawing images are the most proper information to represent the characteristics and shapes of digital images and used for recognition and communication. For the coding of line drawing images, common eight-direction chain code is used mostly. In the paper, the new mode selection chain code method is proposed which can compress the eight-direction chain code about twenty percents and be used for the reversible coding method of line drawing images. In this coding techniques, we set a reference mode for each quadrant around an abject pixel, and assign 3-directional code for these reference modes. Therefore a line pixel is coded with 3 bits. Also, a new corner finding method of line drawing images using this mode selection chain code is proposed in this paper.

• Journal of the Korean Society of Physical Medicine
• /
• v.11 no.2
• /
• pp.33-40
• /
• 2016

PURPOSE: The purpose of this study was to determine the impact of stable and unstable surfaces on abdominal muscle thickness and changes in trunk muscle thickness in accordance with breathing methods during bridging exercises. METHODS: Bridging exercise on a stable surface, bridging exercise on an unstable surface, bridging exercise using a drawing-in maneuver on a stable surface, bridging exercise using a drawing-in maneuver on an unstable surface, bridging exercise using bracing on a stable surface, bridging exercise using bracing on an unstable surface. In sequence, the muscles' thickness was measured three times before and after each exercise, and the measured value was averaged. RESULTS: There were significant differences in internal oblique and transversus abdominis muscles' thickness in the drawing-in maneuver in both stable and unstable surface (p<0.05). There were no significant differences in external oblique muscle's thickness in the bridging exercise in both stable and unstable surface. The type of surface did not have a significant influence on the abdominal muscles' thickness. CONCLUSION: As a result of the study, the drawing-in maneuver had a greater effect than bridging or bracing maneuver on muscle thickness. We suggest that drawing-in maneuver will be more effective in a person with a weak abdominal muscle.

• Journal of KIBIM
• /
• v.13 no.4
• /
• pp.85-95
• /
• 2023

In the process of creating drawings based on Building Information Modeling (BIM), automatically generated annotations can cause interference issues depending on the drawing type. This study aims to develop an algorithm for repositioning annotations using genetic algorithms to minimize such interferences. To achieve this, the Application Programming Interface (API) of BIM software was used to analyze data extractable from BIM drawing files. The process involved defining drawing data related to annotation repositioning, preprocessing this data, and deriving optimal placement coordinates for the annotations. Furthermore, applying the developed algorithm to the preliminary design drawings of small and medium-sized neighborhood facilities resulted in approximately a 95.37% decrease in annotation interference, indicating that the proposed algorithm can significantly enhance productivity in BIM-based drawing tasks.

• Journal of architectural history
• /
• v.7 no.3 s.16
• /
• pp.9-26
• /
• 1998

Architectural Drawing has been settled down the very effective means of exchanging their architectural ideas and data on the construction process. However, it was not easy to conserve the original drawings, which aims had been accomplished, at the same time, building was built. The same phenomena were occurred in our traditional architectural construction project, especially before pre-modern age. And do not understand soundly building documentation accepted by craftsmen in the period of earliest Chosun dynasty and how to present their idea and information of architectural as means of sketches and drawings. So, this paper aimed to clarify the drawing occurrence and the development steps of their rendering, representation methodology in the construction process in Sannungdogam-Uuigue, which were the construction documents of government based on the royal family's tomb and building projects in the late Chosun Dynasty. There are three development stages of architectural space representation, pre-drawing stage, drawing occurring stage and drawing settlement stage, They had been adapted unique drawing presentation method which were drawn by artisan, so called Doseol(圖說)and Painter Hwawon(畵員) The results are 1. In the Pre-drawing stage, they had been used the systematic explanation method of character 2. Do not have the evidence of adapting drawing before 17th centry, it was originated in early 17's century started with Onga(甕家). Onga's Drawing was drawn very elementary skill, and became development, settlement and standardization of their drawing representation around 19th century 3. The drawing presented by client's recognition view of space and building, integrated data within a sheet of drawing with practical and hierarchy and using graphic and description.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.942-945
• /
• 2005

Micron-sized metal wires are widely used in industries such as filtration, catalyst and composite materials, etc. In the wire drawing process, the die that is used conventionally is an effective and, at the same time, sensitive component. However, a typical array of the dies has caused many problems in the wire drawing process, e.g., large frictional force on the interface between wire and the resulting high heat generation, precise adjustment of the dies, extended cooling system, die abrasion, etc.. Because of these problems, there have been many works that are aiming at improving the efficiency of wire drawing process by analyzing the die geometry and by applying advanced die material to prolong the die life or even at developing a dieless wire drawing system. This paper is dealing with developing a new wire drawing system that is applicable to reduce the wire drawing steps with high draw ratio. The new wire drawing system does not use the dies, but use the self-induced heater that works on the basis of the resonant phenomenon of wire material. The electromagnetic wave is the heating source. The results of the study on the diameter reduction and microwave flow analysis show that the heating effectiveness of the wire is influenced by the energy distribution in the microwave propagation chamber. We can obtain diameter-reduced wires by using microwave in the dieless drawing process. Microwave as a heating source is capable of producing wires without applying dies in wire drawing process.