• International Journal of Ocean System Engineering
• /
• 제1권4호
• /
• pp.222-229
• /
• 2011

In this paper, we present the concept and main mission of the Crabster, an underwater walking robot. The main focus is on the modeling of drag and lift forces on the legs of the robot, which comprise the main difference in dynamic characteristics between on-land and underwater robots. Drag and lift forces acting on the underwater link are described as a function of the relative velocity of the link with respect to the fluid using the strip theory. Using the translational velocity of the link as the rotational velocity of the joint, we describe the drag force as a function of joint variables. Generalized drag torque is successfully derived from the drag force as a function of generalized variables and its first derivative, even though the arm has a roll joint and twist angles between the joints. To verify the proposed model, we conducted drag torque simulations using a simple Selective Compliant Articulated Robot Arm.

• International Journal of Control, Automation, and Systems
• /
• 제4권1호
• /
• pp.42-52
• /
• 2006

In order to utilize hydrodynamic drag force on articulated robots moving in an underwater environment, an optimum motion planning procedure is proposed. The drag force acting on cylindrical underwater arms is modeled and a directional drag measure is defined as a quantitative measure of reaction force in a specific direction in a workspace. A repetitive trajectory planning method is formulated from the general point-to-point trajectory planning method. In order to globally optimize the parameters of repetitive trajectories under inequality constraints, a 2-level optimization scheme is proposed, which adopts the genetic algorithm (GA) as the 1st level optimization and sequential quadratic programming (SQP) as the 2nd level optimization. To verify the validity of the proposed method, optimization examples of periodic motion planning with the simple two-link planner robot are also presented in this paper.

• 대한기계학회논문집A
• /
• 제37권3호
• /
• pp.379-385
• /
• 2013

차량의 제동시 쏠림 현상은 크게 타이어에 의한 원인과 현가시스템, 조향시스템 등의 차량구조의 이유로 발생한다. 그 중 차량구조의 원인은 드래그링크 방식의 조향시스템과 판스프링 형태의 현가 스프링 때문으로 볼 수 있다. 본 연구에서는 차량동역학 해석 프로그램인 ADAMS/CAR 를 사용하여 제동시 쏠림의 발생 원인에 대해 분석하였다. 제동시 드래그링크와 판스프링의 거동을 확인하고 그로 인해 발생하는 쏠림을 최소화 시키기 위해 최적화 프로그램인 Visual DOC 를 사용하여 쏠림을 감소시키기 위한 조향 연결점의 위치를 결정하였다. 설계 변경된 차량의 K&C (Kinematic & Compliance) Test 시뮬레이션을 통해서 다른 특성에 미치는 영향이 없음을 보였고, 전차량 제동시뮬레이션을 통해 제동시 쏠림이 감소함을 확인하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.204-209
• /
• 2004

This paper describes dynamic manipulability analysis of robotic arms moving in viscous fluid. The Manipulability is a functionality of manipulator system in a given configuration and under the limits of joint ability with respect to the tasks required to bt performed. To investigate the manipulability of underwater robotic arms, a modeling and analysis method are presented. The dynamic equation of motion of underwater manipulator is derived from the Lagrange - Euler equation considering with the hydraulic forces caused by added mass, buoyancy and hydraulic drag. The hydraulic drag term in the equation: is established as analytical form using Denavit - Hartenberg (D-H) link coordination of manipulator. Two analytical approaches based on Manipulability Ellipsoid are presented to visualize the manipulability of robotic arm moving in viscous fluid. The one is scaled ellipsoid which transforms the boundary of joint torque to acceleration boundary of end-effector by normalizing the torque in joint space while the other is shifted ellipsoid which depicts total acceleration boundary of end-effector by shifting the ellipsoid in work space. An analysis example of 2-link manipulator with proposed analysis scheme is presented to validate the method.

• 제어로봇시스템학회논문지
• /
• 제11권8호
• /
• pp.688-695
• /
• 2005

This paper describes dynamic manipulability analysis of robotic arms moving in viscous fluid. The manipulability is a functionality of manipulator system in a given configuration under the limits of joint ability with respect to the task required to be performed. To investigate the manipulability of underwater robotic arms, a modeling and analysis method is presented. The dynamic equation of motion of underwater manipulator is derived based on the Lagrange-Euler equation considering with the hydrodynamic forces caused by added mass, buoyancy and hydraulic drag. The hydrodynamic drag term in the equation is established as analytical form using Denavit-Hartenberg (D-H) link coordination of manipulator. Two analytical approaches based oil manipulability ellipsoid are presented to visualize the manipulability of robotic arm moving in viscous fluid. The one is scaled ellipsoid which transforms the boundary of joint torque to acceleration boundary of end-effector by normalizing the torques in joint space, while the other is shifted ellipsoid which depicts total acceleration boundary of end-effector by shifting the ellipsoid as much as gravity and velocity dependent forces in work space. An analysis example of 2-link manipulator with proposed analysis scheme is presented to validate the method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1105-1106
• /
• 2013

• 한국CDE학회지
• /
• 제22권2호
• /
• pp.6-10
• /
• 2016

This paper presents the kinematics of a walking robot leg based on Jansen mechanism. By using simple mathematics, all trajectories of walking robot leg links can be calculated. A foot point trajectory is used to evaluate the performance of a walking robot leg. Trial and Error method is used to find a best combination of link lengths under certain restrictions. All simulations are performed by Matlab. Ground score, drag score, step size, foot lift, instant speed, and average speed of foot point trajectories are used for selecting the best one.

• 한국산림과학회지
• /
• 제82권1호
• /
• pp.34-43
• /
• 1993

이 논문에서는 고정식 가선집재기를 중심으로 집재작업의 구조적 특성을 역학적 원리를 이용하여 해석하였다. 그리고 집재지의 지형여건, 시스템의 기하학적 형태 및 작업조건과의 함수관계에서 최대허용반송용량을 추정하기 위한 함수관계식을 힘과 모멘트의 평형조건으로부터 유도하는 과정을 제시하였다. 이러한 관계식 중에는 벌도목의 들어올려진 정도와 단선구조 cable 철선의 역학적 해석을 위한 기본 관계식들이 포함되었고, 단선구조 역학해석은 현수선원리를 기초로 하여 단선의 처짐이 고려되었다. 역학관계식들은 복잡한 비선형함수식들로 구성되어 이를 풀기 위한 과정을 제시하기 위하여 전산모델을 개발하였다, 이 모델에서는 계산목적상 Secant기법을 이용하였다. 또한 가상적인 데이타를 이용하여 전산모델의 적용예를 제시하였다.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2017년)
• /
• pp.540-546
• /
• 2017

Bipedal robots tend to have greater mobility than conventional treaded or wheeled robots yet they are commonly complicated by instabilities in balance. This paper presents a bipedal robot based upon Jansen's locomotive mechanism which addresses these challenges in stability and efficiency. In order to achieve a functioning robot, we considered a multitude of variables in its motion including, the Ground Score, Drag Score, step size, foot lift, stride, and instantaneous speed of the Jansen mechanism. Matlab and Jansen Opt solver were used to optimize the legs of the robot. A trial and error experimental method was used to determine the best combination of link lengths, and m.Sketch was used to model our results. Finally, we drew the entirety of the robot's figure by using the Edison design.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.424-428
• /
• 2016

This paper presents the kinematics of a walking robot leg based on Jansen mechanism. By using simple mathematics, all trajectories of walking robot leg links can be calculated. A foot point trajectory is used to evaluate the performance of a walking robot leg. Trial and Error method is used to find a best combination of link lengths under certain restrictions. All simulations are performed by Matlab. Ground score, drag score, step size, foot lift, instant speed, and average speed of foot point trajectories are used for selecting the best one.