• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 춘계학술발표회 논문집
• /
• pp.409-414
• /
• 2003

In the beginning of the 21s1 century, the world has been making rapid progress and changed all over the areas. Like the rest, as all domiciliary circumstances for a local development have changed, the continuous development considered environmental view has been accounted as much compared with the high growth-oriented development based on the efficiency so far. As the volume of traffic in urban community increases, the environmental load enlarges inevitably. Particularly, the excess and deficiency problems for all sorts of traffic facilities, like the shortage of parking lots continue to happen in proportion to the increase in traffic. For a design to solve these problems, introduction of the Geographic Information System; GIS applied widely over various fields become necessary. In this research, the supply-demand situation in urban areas is observed. The application of GIS for the purpose of the improvement of parking lot management technique to control effectively facilities related to parking lot in the city brings promoting the efficiency of business data inquiry, data management data correction and so on through graphic and non-graphic database for every kind of draft data, record and register data. The graphic users interface to support effective decision-making is applied for the improvement of work in this study. This research also suggests the way to utilize common database considered linkage with sub-systems related existing urban information system by developing the parking lot management system.

• 한국의류학회지
• /
• 제30권8호
• /
• pp.1242-1252
• /
• 2006

Many applications in computer graphics require complex, highly detailed models. However, to control processing time, it is often desirable to use approximations in place of excessively detailed models. Therefore, we have developed the notion of an optimal matrix to simplify the model surface which can then rapidly obtain high quality 2D patterns by flattening the 3D surface. Firstly, the woman's 3D body was modeled based on Size Korea data. Secondly, the 3D model was divided by shell and block for the pattern draft. Thirdly, each block was flattened by the grid and bridge method. Finally, we select the optimal matrix and demonstrate it's efficiency and quality. The proposed approach accommodates surfaces with darts, which are commonly utilized in the clothing industry to reduce the deformation of surface forming and flattening. The resulting optimal matrix could be an initiation of standardization for pattern flattening. This can facilitate much better approximations, in both efficiency and exactness.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2005년도 추계학술대회
• /
• pp.613-628
• /
• 2005

The purpose of this study was to design and implementation of project learning site by using XML. The development of the Internet site for project learning was planned as per preparation, development and test/application stages. At the stage of preparation, literature and cases were reviewed to find the elements of design principles needed for development of a project learning program and those required in the actual development. At the stage of development, the elements of the design principles and those for the actual development, both explored from the stage of preparation were used to develop a draft Internet site for project learning. The elements used for the development of the Internet site for project learning were motivation, specification of learning goals, reminiscence of preceding knowledge, positive participation in teaching activities, learning-guide feedback, evaluation, reinforcement and correction. It is changing web based format. XML advent because of HTML limitations of web based internet and expand it's field. XML is able to gather data on HTML of text based format, thus it is possible to control it's inside. It is expected that many teachers apply this model to their classes and show realistic results.

• KIEAE Journal
• /
• 제12권6호
• /
• pp.29-38
• /
• 2012

The current building energy efficiency rating certification regulation on apartment houses evaluates only the saving rate of energy consumed during operation, i.e. use, of a building, but doesn't consider the energy consumptions and environmental load($CO_2$) emissions occurring during the whole lifetime of a building. So this study calculated the energy consumptions and environmental load emissions occurring during the whole lifetime of a building, selected reference schemes and alternative items by design variables to present a design draft considering energy efficiency and environmental performance, and evaluated the total cost by combining and calculating its direct cost(material and heating cost) and indirect cost(environmental cost), for an existing apartment house as an evaluation object. As a result of analysis, the change of heating cost by alternative items of design variables showed a 4~8% change rate compared to the reference scheme, and the material cost of design variable 7 showed a maximum 4.4 times change rate in the alternative plan 6 compared to the reference scheme. The environmental cost showed a similar change rate to the material cost change rate in general, but showed a similar environmental cost change rate to the heating cost change rate in case of design variables 4-1, 4-2, 7.

• 한국가스학회지
• /
• 제7권1호
• /
• pp.24-27
• /
• 2003

본 연구에서는 국내 석유화학공장에서 운전되고 있는 CDU plant heater, NCC plant heater, CO plant Heater, aromatic plant heater 등 15개 plant heater를 대상으로 조사하였으며, 세부 내용으로는 heater 사고 예방을 위한 공정운전 표준, alarm 작동시 조치 및 setting 변경, 시운전 점검사항, interlock system 분석, interlock by-pass 운전현황, heater 주요 사고$\cdot$사례 등을 분석하였다. interlock 방지 및 시설개선 대책으로 실시간 monitoring 설치, local 압력계 및 온도계추가설치, 초기 운전시 점검방법, interlock by-pass 관리, 오작동 계기 sensor maker 변경, 운전 mode 변경시 주요 현장확인사항, DCS alarm 관리방법 등을 제시하였다. heater interlock에 관련되는 국내외 연구자료가 거의 없어서 주로 석유화학업체 운전 절차서, 공정trouble 일지, 부서장 및 현장 운전원의 의견을 반영하여 연구하였다. 연구의 결과에 따라 interlock 방지 및 시설개선 대책을 운전 절차서에 반영한다면 interlock으로 인한 사고를 크게 줄일 수 있을 것으로 기대된다.

• 한국해안해양공학회지
• /
• 제14권3호
• /
• pp.183-191
• /
• 2002

해수교환이 우수하고, 조차에 따라 상·하로 자유롭게 운동하며, 연약지반과 대수심역에도 설치될 수 있다는 것을 일반적인 부방파제의 주요한 특징으로 들 수 있다. 본 연구는 말뚝계류된 부방파제에 의한 3차원파랑제어와 동적인 거동을 경계적분법과 고유함수전개법을 병용하는 수치해석법으로부터 논의한다. 여기서, 말뚝계류시스템은 연직운동만이 허용되고 다른 운동성분들은 모두 구속되며, 체인계류시스템보다도 파랑에너지의 흡수가 많은 것으로 알려져 있다. 본 연구에서는 말뚝계류에 있어서 말뚝과 본체인 폰툰과의 사이에 작용하는 마찰력과 같은 저항력은 고려되지 않는다. 수치해석결과에 따르면 부방파제의 홀수와 폭의 변화는 파랑제어에 큰 영향을 미치고, 입사파의 주기가 길면 부방파제를 통한 전달파가 크다는 것을 알 수 있다. 그리고, 부방파제의 연직운동은 단주기파에서 크게 나타난다.

• 무역상무연구
• /
• 제21권
• /
• pp.3-37
• /
• 2003

English law accepts the basic principle of freedom of contract that the parties should be free to agree on any terms that they like unless their agreement is illegal or otherwise contrary to public policy because it infringes some public interest. On the other hand, it has been limited for hundreds of years on the basis that certain contract terms, particularly in standard form, may alter a distribution of risks that the customer would reasonably intended. The alteration may often result from his simple ignorance caused by either lack of opportunity to become aware of clauses or inability to understand their full potential implications. In addition, it may also result from disparity in bargaining power which does not allow the customer to look after their own interests even if he is fully aware of the unacceptable clauses. In response to this problem, English law has employed both judicial and statutory intervention techniques to control unfair contract terms. This study describes and analyzes in detail how English law regulates such terms, particularly, in standard form, in order to provide legal advice to our sellers residing either in UK or in Korea who plan to enter into UK markets. It also attempts to explore any problem in the existing double legislations of UCTA and UTCCR and put forward future direction of English law in light of the Draft Unfair Terms Bill which was currently proposed by the Law Commissioners. The main concern of this paper will be confined to some of the various aspects of both judicial and statutory control of unfair contract terms in English law which may draw our attention in terms of domestic or international business sales.

• 대한한의진단학회지
• /
• 제20권2호
• /
• pp.51-65
• /
• 2016

Objectives This study was conducted to suggest a standard operating procedure (SOP) in order to improve the reliability of tongue-image analysis system. Methods An affecting-factors list was made, which may affect the diagnostic parameters of the tongue-image analysis system. They were sub-classified into two groups: controllable and uncontrollable. Only the controllable factors, which could affect the results and easily set-up, were included into the SOP draft. Affecting factors control experiment was performed to investigate the effects of controllable factors, whose influence on diagnostic parameters of the tongue-image analysis system is ambiguous: rehearsal for tongue extrusion; alignment of camera axis; and presentation of a guideline. Three subjects volunteered for this experiment. Each of three variables was implemented twice in a random order by two operators on the subjects. Finally, 96 tongue images obtained in the aggregate. The diagnostic parameter set as a primary outcome in this experiment was the percentage of tongue coating. Results All of the control variables were not significant in both operators; however, the presentation of a guideline was relatively more affect than two other variables. Interaction effects among the variables were also insignificant. Therefore, the presentation of a guideline was included in the final SOP and the other variables were not included. Conclusions We suggested the SOP which could be used for both experimenter and subject. Moreover, Each of the SOPs applied to various types of tongue-image analysis system should be developed in order to improve the reliability.

• Spatial Information Research
• /
• 제6권2호
• /
• pp.183-199
• /
• 1998

본 연구는 한국 95용어 표준을 구축하기 위한 기초를 마련하기 위해 국제표준기관인 ISO의 지리정보기술 위원회(TC211)에 제시된 용어표준화 과정과 국내 정보산업 표준화 과정을 분석하였다. 이를 위해 ISO/TC211에서 제시되는 문서들을 수집하여 용어 표준화 과정 및 최근까지 구축된 지리정보 용어의 표준안을 참조하였다. 특히 다양한GIS표준화 기구에서 수행되고 있는 국제 GIS용어표준안을 비교 분석하여 실제적 흑은 잠재적인 문제들에 대하여 주어진 상황에서 최선의 질서를 이루기 위해 공통적이거나 혹은 반복적으로 적용될 수 있는 규정을 제정하는데 도움을 주려한다. 국제적으로 GIS의 용어표준화 과정은 제안단계를 거쳐 준비단계에서 작업초안(WD:Working Draft)을 작성하는 단계에 머무르고 있다. 반면에 우리나라에서 정보산업 분야의 국제표준 제정작업은 정보산업의 경쟁력을 획기적으로 향상시키기 위해 추진하는 국책과제로서, 통상산업부가 추진하는 산업기술 기반조성사업의 일환으로 추진되고 있다. 우리나라에서 적극적으로 용어표준화과정에 참여할 경우 우리나라 상황에 적합한 용어표준으로 국제표준화를 선도할 수 있다고 생각된다. 따라서 현재 국제표준화기구에서 추진되고 있는 용어 표준화추세를 정확하게 파악한다면, 한국의 ISO/TC211ㆍ지리정보기술위원회의 용어 표준 작업반에서 국내의 업계 및 관련기관의 의견을 수렴한 GIS용KS(안)을 개발하는데 매우 중요한 자료로 활용될 수 있으리라 생각된다.

• 한국도서관정보학회지
• /
• 제52권1호
• /
• pp.109-128
• /
• 2021

본고에서는 LRM 노멘 개체를 수용하기 위한 전거제어시 고려사항을 모색하고자 문헌연구, RDA 규칙분석, 국내 목록 전문가 의견조사를 실시하였다. 그 결과 전거제어를 위해 노멘의 속성 요소, 목록기술, MARC 전거포맷 측면에서 고려사항을 제안하였다. 첫째, 노멘의 속성으로 LRM 노멘의 유형, 스킴, 이용대상자, 이용맥락, 참고정보원, 언어, 문자, 문자변환과 RDA에서 추가한 식별상태, 주기, 구분불가한 이름지시자의 기술을 가능한 상세히 기술해야 한다. 둘째, 노멘의 속성요소 및 관계요소를 기술하기 위해 목록규칙인 RDA에 제시된 대로 비구조화, 구조화, 식별자, IRI로 기술하며, 이중 구조화된 기술을 위해서는 어휘인코딩스킴(VES), 스트링인코딩스킴(SES)이 작성되어야 한다. 또한, 전거형접근점에 대한 구조 및 우선 이름/표제에 대한 목록 규칙도 마련되어야 한다. 셋째, LRM 노멘을 반영할 수 있도록 MARC 21 전거포맷을 마련하기 위해 Maxwell의 확장(안)을 바탕으로 추가 확장 방안을 제안하였다. (1) 노멘 마다 속성이 입력될 수 있도록 4XX, 5XX에 속성이 기술되어야 하며, 1XX, 5XX와 4XX에 기술될 노멘의 속성을 구분하였다. (2) 노멘 속성으로 유형, 언어, 문자, 문자변환, 이용맥락, 유효기간을 기술하기 위해서는 MARC 21내에 표시기호 및 식별기호가 추가되어야 한다. 이에 368, 381, 377의 식별기호 확장과 이용맥락과 유효기간을 기술하기 위한 표시기호를 추가할 것을 제안하였다. 본고에서 제안한 LRM 노멘을 위한 전거제어시 고려사항은 국내에서 LRM을 반영한 전거제어 방안을 마련하는 기반이 될 것이다.