• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.11a
• /
• pp.179-182
• /
• 1998

It is widely recognized that conventional means for determining the minimum ignition energy(MIE) of powder are time-consuming and require operational skill. As a variety of new fine powders are being produced day by day in industry, there is an urgent need to a quicker and more economical means to measure MIE. To meet this requirement, we have developed a measurement system which employs a novel method to create an air/dust mixture in a miniature combustion box. In this system, the powder to be tested input into a hopper made of metal mesh, and successively fed downward to form a thin, curtain-like dust/air mixture by vibration. With this new apparatus, three type of powders -Lycopodium, Anthraquinone, and Polyacrylonitrile-were tested and the MIE data were compared with those taken with a conventional apparatus(the Hartmann tube). Two of them agreed satisfactory, but the other, anthraquinone, showed quite different values supposedly due to the agglomeration of the powder particles by static-charge.

• Journal of Magnetics
• /
• v.1 no.1
• /
• pp.9-13
• /
• 1996

The effects of surface relaxation on surface and interface magnetism in Fe/Cr (001) are investigated using the highly precise all-electron total-energy full-potential linearized augmented plane wave method. The Fe-Cr interlayer spacing is deter-mined by total-energy calculation and it is found to be relaxed downward by 18%. For the relaxed system, the magnetic moment of surface Fe is highly suppressed to be $1.72\mu_B$compared to the unrelaxed case ($2.39\mu_B$). This reduction of magnetic moment is considered as a result of the enhanced hybridization between Fe-d and Cr-d states, which can be seen from the calculated density of states. This work suggests the importance of effect of relaxation to the surface and interface magnetism in Fe/Cr system.

• Nuclear Engineering and Technology
• /
• v.29 no.3
• /
• pp.251-259
• /
• 1997

This paper describes experimental investigations of helium-air exchange flows through partitioned opening and too-opening. Such exchange flows may occur following rupture accident of stand pipe in high temperature engineering test reactor. A test vessel with the too types of small opening on top of test cylinder is used for experiments. An estimation method of mass increment is developed to measure the exchange now rate. Upward flow of the helium and downward flow of the air in partitioned opening system interact out of entrance and exit of the opening. Therefore, an experiment with too-opening system is made to investigate effect of the fluids interaction of partitioned opening system. As a result of comparison of the exchange flow rates between too types of the opening system, it is demonstrated that the exchange flow rate of the two-opening system is larger than that of the partitioned opening system because of absence of the effect of fluids interaction.

• Solar Energy
• /
• v.8 no.2
• /
• pp.66-72
• /
• 1988

Natural convection in a horizontal annulus with spacers has been studied on the effects of diameter ratio and Rayleigh numbers and position of spacers by experimental method. In case of vertical spacers, the local spacer Nusselt numbers show positive values on the lower spacer, but negative values on the upper spacer. In case of horizontal spacers, the local spacer Nusselt numbers show positive values on the upward surface of spacer, but negative values on the downward surface of spacer. The mean tube Nusselt numbers and mean cylinder Nusselt numbers with vertical spacer are increased 10% and 2.1%, respectively by those of horizontal spacer.

• ETRI Journal
• /
• v.40 no.5
• /
• pp.653-663
• /
• 2018

Patients with spinal cord injuries cannot move their limbs using their intact muscles. A suitable controller can be used to move their arms by employing the functional electrical stimulation method. In this article, a fuzzy exponential sliding-mode controller is designed to move a musculoskeletal human arm model to track an optimal trajectory in the sagittal plane. This optimal arm trajectory is obtained by developing a policy for the central nervous system. In order to specify the optimal trajectory between two points, two dynamic and static optimal criteria are applied simultaneously. The first dynamic objective function is defined to minimize the joint torques, and the second static optimization is offered to minimize the muscle forces at each moment. In addition, fuzzy logic is used to tune the sliding-surface parameter to enable an appropriate tracking performance. Simulation results are evaluated and compared with experimental data for upward and downward movements of the human arm.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.3
• /
• pp.433-441
• /
• 2001

Natural convection of a fluid with intermediate Prand시 number of Pr=0.2 in a horizontal annulus is considered, and the bifurcation phenomena and chaotic flows are numerically investigated. The unsteady two-dimensional streamfunction-vorticity equation is solved with finite difference method. The steady downward flow with two counter-rotating eddies bifurcates to a simple periodic flow with a fundamental frequency. And afterwards, second Hopf bifurcation occurs, and a quasi-periodic flow with two incommensurable frequencies appears. However, a new time-periodic flow is established after experiencing quasi-periodic states. As Rayleigh number is increased further, the chaotic flow regime is reached after a sequence of successive Hopf bifurcation to quasi-periodic and chaotic flow regimes. A scenario similar to the Ruelle-Takens-Newhouse scenario of the onset of chaos is observed.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.247-252
• /
• 2001

In this paper, dynamic modeling and its analysis for the PIG flow through $90^{\circ}$ curved pipe with compressible and unsteady flow are studied. The PIG dynamics model is derived by using Lagrange equation under assumption that it passes through 3 different sections in the curved pipeline such that it moves into, inside and out of the curved section. The downstream and up stream flow dynamics including the curved sections are solved using MOC. The effectiveness of the derived mathematical models is estimated by simulation results for a low pressure natural gas pipeline including downward and upward curved sections. The simulation results show that the proposed model and solution can be used for estimating the PIG dynamics when we pig the pipeline including curved section.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.4
• /
• pp.182-186
• /
• 2003

The photovoltaic industry has been forced to lower the production cost in many ways. Ingot preparation technology is growing rapidly toward large-scale production. Multicrystalline silicon ingot of 69 cm square cross section, 240kg has been produced with fully automated equipment. During solidification, heat has been extracted from the bottom of the crucible through the graphite pedestal moving downward. The characteristics of the large ingot grown in this method are found to be uniform structurally and electrically.

• Journal of Mechanical Science and Technology
• /
• v.18 no.7
• /
• pp.1213-1221
• /
• 2004

Transient and asymmetric density distributions have been investigated by three-dimensional digital speckle tomography. Multiple CCD images captured movements of speckles in three angles of view simultaneously because the flows were asymmetric and transient. The speckle movements between no flow and downward butane flow from a circular half opening have been calculated by a cross-correlation tracking method so that those distances can be transferred to deflection angles of laser rays for density gradients. The three-dimensional density fields have been reconstructed from the deflection angles by a real-time multiplicative algebraic reconstruction technique (MART).

• Journal for History of Mathematics
• /
• v.31 no.1
• /
• pp.37-51
• /
• 2018

In this paper, our main concern is the historical development of the Finsler geometry in Debrecen, Hungary initiated by L. Berwald. First we look into the research trend in Berwald's days affected by the $G{\ddot{o}}ttingen$ mathematicians from C. Gauss and downward. Then we study how he was motivated to concentrate on the then completely new research area, Finsler geometry. Finally we examine the course of establishing Hungarian Debrecen school of Finsler geometry via the scholars including O. Varga, A. $Rapcs{\acute{a}}k$, L. $Tam{\acute{a}}ssy$ all deeply affected by Berwald after his settlement in Debrecen, Hungary.