• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.77-81
• /
• 2002

This paper demonstrates a CMOS downconversion mixer for 2.4GHz ISM band applications. The mixer, implemented in a 0.18um CMOS process, is based on the CMOS Gilbert Cell mixer, With a 2.5GHz local oscillator and a 2.45GHz RF input, the measurement results exhibit power conversion gam of -6dB, IIP3 of -6dBm, input $P_{-1dB}$ of -15 dBm, and power dissipation in mixer core of 2.7 mW with 0㏈m LO power and 1.8V supply voltage.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.54-58
• /
• 2002

This paper describes the theoretical analysis and performance of a 2.4㎓ bulk-driven downconversion mixer, where the LO signal is input via the bulk. A mixer core designed with a 0.18$\mu\textrm{m}$ CMOS process is able to operate under 0.8V∼1V supply voltage. The RF, LO, and IF port frequencies are 2.45㎓, 2.4㎓, and 50MHz, respectively. The measurement results exhibit conversion gain of -1.8㏈, l㏈ compression point of -17㏈m and IIP3 of -4㏈m with 0㏈m LO power. The power consumption is as small as 4mW.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.91-95
• /
• 2003

In this work, we have designed Gilbert cell downconversion mixer using 0.25um Anam CMOS process, we also have analyzed Conversion gain and IIP3 using Taylor series in our own unique way. Especially, bulk terminal is used as LO( Local Oscillator) input for reduction of power consumption and supply voltage. Supply voltage used in this design is lower than 1.8V and core current is less than 500uA. The simulation experiments showed that the conversion gain, IIP3, and power consumption were -1dB, 4.46dBm, and 0.8mW, respectively.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.391-395
• /
• 2003

In this work, we have designed Gilbert cell downconversion mixer using 0.25um Anam CMOS process, we also have analyzed Conversion gain and IIP3 using Taylor series in our own unique way. Especially, bulk terminal is used as LO( Local Oscillator) input for reduction of power consumption and supply voltage. Supply voltage used in this design is lower than 1.8V and core current is less than 500uA. The simulation experiments showed that the conversion gain, IIP3, and power consumption were -1 dB, 4.46dBm, and 0.8mW, respectively.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권5호
• /
• pp.595-604
• /
• 2016

Utilizing a standard 130-nm CMOS process, a RF frontend is designed at 24 GHz for automotive collision avoidance radar application. Single IF direct conversion receiver (DCR) architecture is adopted to achieve high integration level and to alleviate the DCR problem. The proposed frontend is composed of a two-stage LNA and downconversion mixers. To save power consumption, and to enhance gain and linearity, stacked NMOS-PMOS $g_m$-boosting technique is employed in the design of LNA as the first stage. The switch transistors in the mixing stage are biased in subthreshold region to achieve low power consumption. The single balanced mixer is designed in PMOS transistors and is also realized based on the well-known folded architecture to increase voltage headroom. This frontend circuit features enhancement in gain, linearity, and power dissipation. The proposed circuit showed a maximum conversion gain of 19.6 dB and noise figure of 3 dB at the operation frequency. It also showed input and output return losses of less than -10 dB within bandwidth. Furthermore, the port-to-port isolation illustrated excellent characteristic between two ports. This frontend showed the third-order input intercept point (IIP3) of 3 dBm for the whole circuit with power dissipation of 6.5 mW from a 1.5 V supply.

• 한국항행학회논문지
• /
• 제13권1호
• /
• pp.48-53
• /
• 2009

본 논문은 1P8M CMOS $0.13{\mu}m$ 공정을 이용하여 GPS응용에 적합한 프론트-엔드(front-end)를 구현하였다. 저잡음 증폭기(LNA)는 능동 안테나와 수동 안테나를 지원하기 위해 높은 전압이득과 낮은 잡음지수(Noise Figure)의 LNA1모드와 낮은 이득과 높은 입력 3차 교차점(IIP3: 3rd Input Intercept Point)의 LNA2모드로 동작한다. 두 LNA의 측정된 성능은 1.2 V의 공급전압에서 각각 3.2/2 mA의 전류를 이용하여 16.4/13.8 dB 이득과, 1.4/1.68 dB NF, 그리고 -8/-4.4 dBm의 IIP3값을 갖는다. 쿼드 하향주파수 혼합기(quadrature downconversion 혼합기)는 트랜스임피던스 증폭기(transimpedance amplifier)와 가변저항을 이용하여 27.5 dB에서 41 dB의 변환이득을 갖는다. 프론트-엔드는 LNA1모드 동작 시 6.6 mW의 전력을 소모하여 39.8 dB의 변환이득, 2.2 dB의 잡음지수와 -33.4 dBm의 IIP3의 성능을 갖는다.