• Proceedings of the Safety Management and Science Conference
• /
• 2003.11a
• /
• pp.93-96
• /
• 2003

In this regard, the newly focused logistics information system makes reducing the expenses of whole logistic available by cutting down the expenses of materials, transportation and stock and also, it allows the company to cut down the procurement expense through the reduced lead-time and rationalize producing plans by eliminating the uncertain orders and fluctuation in procurement. It further more optimizes the efficiency of over all productions by meeting the dead line for delivery to the customers. In the recent environment of globalization where fierce competitions exist between manufacturers, logistics plays important role in the strategies of companies, and managements of companies try their best efforts in establishing the strategy to accomplish the innovative relationship between supply chain channels. Therefore, in this study, we try to suggest the model of consolidated logistics system that is integrated logistics information system with suggesting the better way of logistics and comparative analysis with logistics system to resolve the difficulties numbers of companies face after realizing what logistics information system is in Korea.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2001.06a
• /
• pp.38-38
• /
• 2001

The rainfall estimates give sufficiently accurate information to map areas which have received the minimum rainfall necessary for outbreaks of pests such as locusts, thus cutting down the cost of searching for likely outbreak sites. At the other end of the scale, satellite rainfall estimates can be used to give timely warnings of changes in river levels and the likelihood of floods in large river catchments.(omitted)

• The Journal of Korean Society for School & Community Health Education
• /
• v.17 no.2
• /
• pp.31-44
• /
• 2016

Objectives: This study was aimed at finding out the current smoking situation of workers in the field of railroad electricity and vehicles and changes of their smoking behaviors after the raise of price of tobacco in 2015. Methods: With a self-administered questionnaire conducted from February 9 to March 6 2015, one-way ANOVA and crosstabs(PASW Statistics Ver. 18.0) were conducted on the data of 626 people. Results: As the result, the smoking rate was 39.1% and 90.5% of the smoking experienced group showed some changes including cutting down on smoking due to raise of price of tobacco. Factors related to smoking included stress, the number of times of drinking, awareness of harmfulness of smoking, the number of days with hard exercise per week and the marital status. Conclusion: Therefore, it is assumed that there is necessity of top-down intervention using these factors to cut down the smoking rate.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.95-103
• /
• 2015

This paper presents the effects of the tool shape on the geometrical characteristics of flat end-milled side walls. A tool shape is characterized by such parameters as helix angle, number of cutting edges, and diameter. The geometrical characteristics of the side walls are represented by the surface profiles in the feed and axial directions, which are orthogonal to each other. The geometrical defects in each direction are estimated based on the instantaneous apparent cutting areas, which are represented by the interference area between the tool and workpiece and that between the cutting edge and workpiece. It is confirmed that a geometrical defect in the feed direction is formed when the tool leaves the workpiece and the curvature of the tool path changes. Defects in the axial direction are also found in the side walls, except for the defect zone in the feed direction. An up-cut using an end-mill with a steeper helix angle, a greater number of cutting edges, and a smaller diameter are thus found to improve the geometrical accuracy of end-milled side walls.

• Wind and Structures
• /
• v.35 no.5
• /
• pp.309-322
• /
• 2022

Due to the complex terrain around high-speed railways, the windbreaks were established along different landforms, resulting in irregular windbreak transition regions between different subgrade infrastructures (flat ground, cutting, embankment, etc). In this paper, the effect of a windbreak transition on the wind flow around railways subjected to crosswinds was studied. Wind tunnel testing was conducted to study the wind speed change around a windbreak transition on flat ground with a uniform wind speed inflow, and the collected data were used to validate a numerical simulation based on a detached eddy simulation method. The validated numerical method was then used to investigate the effect of the windbreak transition from the flat ground to cutting (the "cutting" is a railway subgrade type formed by digging down from the original ground) for three different wind incidence angles of 90°, 75°, and 105°. The deterioration mechanism of the flow fields and the reasons behind the occurrence of the peak wind velocities were explained in detail. The results showed that for the windbreak transition on flat ground, the impact was small. For the transition from the flat ground to the cutting, the influence was relatively large. The significant increase in the wind speeds was due to the right-angle structure of the windbreak transition, which resulted in sudden changes of the wind velocity as well as the direction. In addition, the height mismatch in the transition region worsened the protective effect of a typical windbreak.

• The Journal of the Korea Contents Association
• /
• v.7 no.8
• /
• pp.117-124
• /
• 2007

The one-person producing system is that planning program, arrangements, composition, taking pictures and edition are all done by only one person. In the reality of the producing systems of the broadcasting programs, as the number of the broadcasting stations, which apply one-person producing systems, is gradually increasing, the study on the change is going on. In this study I grasped the merits and demerits of both systems ; multi men producing system and one-person producing system. And then I analyzed the sudden change of the method of the producing programs into one using the 6m digital camera. The merits of producing programs by means of the 6m digital cameras are following ; the mobility of producing programs, a close contact with the source, the enlargement of the diversity of the contents and cutting down expenses. The demerits of it are following ; a lowering of the degree of completion and the unstableness of an image. Nowadays because of the enlargement of the rate of the outsourcing production, the number of the independent production studios rapidly increased. From the viewpoint of cutting down expenses and the diversity of contents, the number of broadcasting programs produced by means of one-person producing broadcasting program system is increasing.

• Journal of Sericultural and Entomological Science
• /
• v.4
• /
• pp.27-31
• /
• 1965

The aim of this work was to investigate how the mulberry shoots grew well when the mulberry branches were cut down, in hight, 1/3, $\frac{1}{2}$ and 2/3 of them, respectively, just before the Spring budding. The results obtained are as follows: 1. The rate of un-sprouted buds decreased sharply down as much as half of the control if the mulberry branches were cut off. The treatment, 1/3, was best one of various cut down sizes and the un-sprouted buds concentrated on the lower parts of the branches. 2. Even though the branches were cut down, at first it seemed flat to accelerate the sprouting of buds, but rather to have a tendency to become late. The speed of leaf growth, however, became faster after the sprouting. It took 7~9 days from the beginning of buddings to the 5th full grown leaf, and.7 days for the shortest one in the treatment, 2/3, when compared with 16 days of the control. 3. If the branches were cut down, the growth of the new sprouts was accelerated. For 45 days (on 5th of May to on 10th of June), therefore. the shoots had grown up to 1.6～2.5 times of the control, 34cm long. The shoots of which the branches were cut down at 2/3 of them were longest (83cm). Furthermore. the speed of shoot growth of cut-down branches was faster than that of the control. 4. In the increased rate of the number of the mulberry leaves, there was not significant difference between the control and the treatments. 5. The total amount of shoot growth showed considerably much more in the treatments than in the control. The successing growing shoots of treatment, 2/3 were little in a number but longest per one shoot in mean shoot length. 6. It seems to be much available that we may cut down branches at 2/3 of them in order to get the scions for the cutting as soon as possible.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.1
• /
• pp.49-62
• /
• 2015

As methods reducing damages by jellyfish which enter the coastal areas of Korea, attaching cutting devices to towing nets of otter trawls or pair trawls and/or using a canvas type of cutting nets of small fishing boats have been widely utilized. In order to reduce shut-down damages of power plants in coastal areas due to the mass influx of marine organisms including jellyfish, a possible improvement of the traveling water screen system and various jellyfish influx blocking devices were suggested in this study. The results could be utilized as an important index for reducing damages by jellyfish bloom which cause on a massive scale in summer in Korea.

• Design & Manufacturing
• /
• v.17 no.1
• /
• pp.7-12
• /
• 2023

Recently, with the emergence of the 4th industrial revolution, the demand for smart factories and factory automation is increasing. In this study, a tool life prediction program was developed to select optimal machining conditions using CNC milling equipment, which is widely used in flexible production and automation. The equipment used in the experiment was Hwacheon Machine Tool's 5-axis machining equipment, and the tool used was a 17F2R tool. For the machining path, the down-milling cutting method was selected and long-term machining was performed. The analysis standard for side wear on the tool was set at 0.1 to 0.2 mm, and tool life data and wear data were obtained in the cutting experiment. The program was created through the data obtained from the experiment, and a prediction rate of over 90% was secured when comparing the experimental data and the predicted data.

• Journal of Biosystems Engineering
• /
• v.35 no.6
• /
• pp.373-379
• /
• 2010

This study was carried out to develop a belt pick-up type one-row soybean cutter, using physical properties and production conditions of soybeans. The prototype soybean cutter consisted of 4 parts: cutting part, conveying part, collecting part, and travelling part. The prototype soybean cutter was designed to cut soybeans planted with a row spacing of 600 mm, and at a height of 30 mm from the bed bottom using a disk saw. Through various trials with different peripheral velocities of the disk saw and forward speed of the cutter, determined ranges of the peripheral velocity of the disk saw cutting soybeans stems were greater than 18.3 m/s. Spacing between pick-up belts (clearance) was in a range of 60~90 mm so that soybeans could be picked at heights greater than 25 cm, and the size and shape of the pick-up belt were determined the conventional manual harvesting method. The optimal ratio between the forward speed of cutter and the peripheral speed of pick-up belts were from 1 to 1.2 by theoretical analysis. the pick-up belts had a $35^{\circ}$ of tilted angle and $90^{\circ}$ of twisted angle to pick up soybeans safely from the plant input to the lower end of the belts and convey soybeans to the upper end of belts nearby a container. The soybeans at the rear container were dropped down on the soybean row with an interval. The effective field capacity of the prototype soybean cutter was 0.136 ha/h, reducing the working hour by 92% when compared with the manual cutting.