• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.3
• /
• pp.264-275
• /
• 2008

Electron mobility has been investigated theoretically in undoped double-gate (DG) MOSFETs of different channel architectures: a relaxed-Si DG SOI, a strained-Si (sSi) DG SSOI (strained-Si-on-insulator, containing no SiGe layer), and a strained-Si DG SGOI (strained-Si-on-SiGe-on-insulator, containing a SiGe layer) at 300K. Electron mobility in the DG SSOI device exhibits high enhancement relative to the DG SOI. In the DG SGOI devices the mobility is strongly suppressed by the confinement of electrons in much narrower strained-Si layers, as well as by the alloy scattering within the SiGe layer. As a consequence, in the DG SGOI devices with thinnest strained-Si layers the electron mobility may drop below the level of the relaxed DG SOI and the mobility enhancement expected from the strained-Si devices may be lost.

• Macromolecular Research
• /
• v.16 no.7
• /
• pp.575-585
• /
• 2008

There are two beamlines (BLs), 4C1 and 4C2, at the Pohang Accelerator Laboratory that are dedicated to small angle X-ray scattering (SAXS). The 4C1 BL was constructed in early 2000 and is open to public users, including both domestic and foreign researchers. In 2003, construction of the second SAXS BL, 4C2, was complete and commissioning and user support were started. The 4C2 BL uses the same bending magnet as its light source as the 4C1 BL. The 4C1 BL uses a synthetic double multilayer monochromator, whereas the 4C2 BL uses a Si(111) double crystal monochromator for both small angle and wide angle X-ray scattering. In the 4C2 BL, the collimating mirror is positioned behind the monochromator in order to enhance the beam flux and energy resolution. A toroidal focusing mirror is positioned in front of the monochromator to increase the beam flux and eliminate higher harmonics. The 4C2 BL also contains a digital cooled charge coupled detector, which has a wide dynamic range and good sensitivity to weak scattering, thereby making it suitable for a range of SAXS and wide angle X-ray scattering experiments. The general performance of the 4C2 BL was initially tested using standard samples and further confirmed by the experience of users during three years of operation. In addition, several grazing incidence X-ray scattering measurements were carried out at the 4C2 BL.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.6 s.121
• /
• pp.656-663
• /
• 2007

In this paper, when a E-polarized plane wave is incident on the grating consisting of tapered resistive strips, electromagnetic scattering is analyzed using the method of moments(MoM). The induced current density of each resistive strip in a grounded double dielectric layer is expected to blow up at both edges. To satisfy this, the induced surface current density is expanded in a series of Chebyshev polynomials of the second kind. The scattered electromagnetic fields are expanded in a series of Floquet mode functions. The boundary conditions are applied to obtain the unknown current coefficients. According to the variation of the involving parameters such as strip width and spacing and angle of the incident field, numerical simulations are performed by applying the Fourier-Galerkin moment method. The numerical results of the normalized reflected power for resistive strips case for several resistivities are obtained.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.10
• /
• pp.811-816
• /
• 2018

When applying the MLFMM algorithm to a large scattering problem, the accuracy of the calculation of the transfer function has a crucial effect on the final simulation results. The numerical accuracy for the double integral on the unit sphere is strongly dependent on the sampling number. With an increasing the sampling points, the overall required memory and running time of the MLFMM simulation also increases. Hence, an optimal over-sampling rate for the number of the sampling points is numerically obtained, which is verified for a real large scattering problem.

• Journal of The Korean Astronomical Society
• /
• v.53 no.2
• /
• pp.35-42
• /
• 2020

We analyze high dispersion emission lines of the symbiotic nova AG Pegasi, observed in 1998, 2001, and 2002. The Hα and Hβ lines show three components, two narrow and one underlying broad line components, but most other lines, such as H_I, He_I, and He_II lines, show two blue- and red-shifted components only. A recent study by Lee & Hyung (2018) suggested that the double Gaussian lines emitted from a bipolar conical shell are likely to form Raman scattering lines observed in 1998. In this study, we show that the bipolar cone with an opening angle of 74°, which expands at a velocity of 70 km s^-1 along the polar axis of the white dwarf, can accommodate the observed double line profiles in 1998, 2001, and 2002. We conclude that the emission zone of the bipolar conical shell, which formed along the bipolar axis of the white dwarf due to the collimation by the accretion disk, is responsible for the double Gaussian profiles.

• Progress in Superconductivity and Cryogenics
• /
• v.20 no.4
• /
• pp.36-40
• /
• 2018

In this study, the electromechanical properties in Sn-Cu double layer stabilized GdBCO coated conductor (CC) tapes with and without external lamination under uniaxial tension were examined at 77 K and self-field. Their irreversible stress and strain limits were determined using a loading-unloading scheme based on different critical current ($I_c$) recovery criteria. The repeated tests were performed and statistical estimation was done to check the reproducibility depending on the criterion adopted in evaluating the electromechanical properties. From the results, it showed that the Sn-Cu double-layer stabilized CC tapes have the higher irreversible stress limit, but lower irreversible strain limit as compared to brass laminated ones. Through the repeated tests, it can be found that a small scattering of irreversible limits existed in both CC tape samples. Finally, similar strain sensitivity of $I_c$ in both CC tapes was obtained.

• Journal of the Optical Society of Korea
• /
• v.2 no.2
• /
• pp.45-49
• /
• 1998

We have combined Brillouin scattering experiments and fucdamental optics theory to determine the birefringence of single crystals. Double refraction in anisotropic materials give rise to doublet peaks in Brillouin spectra. With the incident plane orthogonal to the optic axis, the birefrigence of the materials can be determined from one spectrum. We present the Brillouin spectra to confirm this fact for a single crystal $PbMoO_4$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.118-118
• /
• 2000

We investigate Frohlich-like electron--optical-phonon interactionsin uniaxial crytals based on the macroscopic dielectric continuum model. In general, the optical-phonon branches support mixed longitudinal and transverse modes due to the anisotropy. For heterostructures with double interfaces and superlattices, it is known that confined, interface, and half-space optical phonon modes exist in zincblende cystals. In uniaxial structures, additional propagating modes may exist in wurtzite heterosystems due to anisotropic phonon dispersion. This is especially the case when the dielectric properties of the adjacent heterostructure materials do not differ substantially. The dispersion relations and the interaction Hamiltonians for each of these modes are derived.

• Applied Science and Convergence Technology
• /
• v.24 no.6
• /
• pp.228-231
• /
• 2015

We investigated the adsorption structures and the initial growth mode of ultra-thin Al films on a W(110) surface at a high temperature. When Al atoms were adsorbed on the W(110) at the substrate temperature of 1100 K and with coverage of 0.5ML, Al atoms formed a p($2{\times}1$) double-domain structure. When the coverage was 1.0 ML, the double domain of a hexagonal structure (fcc(111) face) rotated ${\pm}5^{\circ}$ from the [100] direction of the W(110) surface and another distorted hexagonal structure were found. Low-energy electron diffraction results along with ion scattering spectroscopy results showed that the Al atoms followed the Volmer-Weber growth mode at a high temperature.

• Journal of electromagnetic engineering and science
• /
• v.9 no.1
• /
• pp.46-52
• /
• 2009

This paper conducts a study on the frequency-dependent filtering and blocking effects of a variety of periodic structures, dubbed frequency selective surface(FSS). The periodic structures of interest are 1D and 2D repeated patterns of metal patches or slots sitting on the interface between the two different regions in the layered media which will show the capacitive or inductive behaviors and incorporated with the electromagnetic bandgap(EBG) geometry as another stratified media. Besides the normal substances so called double positive(DPS)-type in the layered media, metamaterials of double negative(DNG) are considered as layering components on the purpose of investigating the unusual electromagnetic phenomena. Frequency responses of transmission(absorption in terms of scattering) and reflection will be calculated by a numerical analysis which can be validated by the comparison with the open literature and demonstrated for the periodic structures embedding metamaterials or not. Most importantly, numerous examples of FSS will present the useful guidelines to have absorption or reflection properties in the frequency domain.