• 실천공학교육논문지
• /
• 제15권3호
• /
• pp.641-647
• /
• 2023

핀테크 환경에서 스마트 폰을 이용한 금융거래가 안전하게 거래되기 위해서는 스마트 폰의 소유자에 대한 인증이 필수적이다. 스마트 폰을 이용한 인증기법은 패스워드 인증, 생체인증, SMS 인증 등이 있다. 사용자 인증에서 패스워드 입력을 통한 인증이 보편적이고 편리성이 높기 때문에 스마트 폰에서 많이 활용되고 있다. 손쉬운 인증이지만 키로깅 공격이나 엿보기 등의 공격에 취약점이 존재한다. 스마트 폰에서 패스워드 입력에서의 취약점을 해결하기 위한 보안 키패드가 제안되고 있다. 터치하는 위치로 입력하는 문자를 유추하는 공격에 강인한 그룹 키패드가 제안되었지만 사용 편리성 측면에 개선이 필요하다. 본 연구에서는 기존의 그룹 키패드에서 그룹핑된 키패드를 측면에 배치하고, 드래그를 활용하여 편리성을 제공하면서 엿보기나 레코딩 공격에 강한 새로운 방법을 제안하고자 한다. 제안 기법은 레코딩 공격을 차단하기 위해 마지막 문자확인 대신 키패드의 새로운 표시를 통해 사용자가 쉽게 확인하고, 터치하는 방법에서도 드래그를 사용하였다. 국내 사용자를 위한 다양한 배치 방법을 제시하여 패스워드 입력에서 기존 방식보다 입력의 효율성과 안전성을 제시하였다.

• 한국기계가공학회지
• /
• 제19권5호
• /
• pp.21-26
• /
• 2020

A descending lifeline is the only self-escape fire apparatus for fire in high-rise buildings and is installed in most buildings according to fire-fighting law. However, it is difficult to properly use and quickly evacuate during an emergency due to its complex installation methods and procedures, even if users are pre-educated. In this paper, a new one-touch descending lifeline, which simplifies usage procedures and can be used regardless of whether users are educated, is proposed to solve the drawbacks of the conventional descending lifeline. All separate parts that require additional installation are initially assembled in a box, and the concept of a double square linkage is proposed to enable escape in a single motion of pushing the handle attached to the box. Three steps of kinematic design are explored to determine an appropriate configuration of double square linkage, and its dimensions are determined using Matlab and NX CAD software. The proposed all-in-one descending lifeline also follows the enforcement decree of the Fire Control Act, and its feasibility is verified through fabrication.

• 한국병원경영학회지
• /
• 제26권3호
• /
• pp.28-42
• /
• 2021

Purposes: The objective of this study is to analyze service design process of dental clinic preventive service by using 'Double Diamond Design Process' which is user-centered for improving dental clinic management efficiency. Methodology: We examine case study that dental clinic preventive service of local dental clinic. Following the double diamond design four steps(①discover, ②define, ③develop, ④deliver), we use suitable analytic tools in each steps. In discover step, we perform observation and desk research. Next, in define step, affinity diagram, user persona, and user journey map are performed. We then make service blueprint in develop step. Finally, in deliver step, virtual scenario and confirm some outputs which are based on results of former steps are suggested. Findings: As a result of this study, waiting and consulting phases turn out that these phases are in the most trouble than others. Users(patients) have lots of complain and dissatisfaction in these phases. These touch-points will have to be modified Practical Implication: After checking this study result, it could suggest improvement schemes. To apply these, we try to make some scenarios, and finally realize some outputs. Service design has arisen to strengthen the competitiveness by reflecting user's experience and needs. Especially, service design is not typical, it is so flexible that can apply to various situation and objects. We hope that result of this study is made good use for dental clinics in need.

• 전기학회논문지P
• /
• 제62권3호
• /
• pp.139-144
• /
• 2013

In Korea, where most of the sites are narrow in space and their earth resistivity is relatively high, the spaces between grounding conductors are likely to be designed narrow in order to lower ground resistance and dangerous voltage below to the permitted safety values. In addition, ground nets are in the shape of square or rectangle depending on the location and size of the facilities and ground contact area, and inner conductors are laid out in grids like the pattern of nets. Nevertheless, with the existing designs, the marginal voltage for safety gets higher as the area is extended further outside, in comparison with that of inner mesh grounding, thus causing much difficulty maintaining them equipotential, and there exist limits in the burial, grounding grid design considering the dangerous voltage of muti-layered model in the constrained sites, was studied.

• 한국운동역학회지
• /
• 제15권4호
• /
• pp.143-151
• /
• 2005

This study was conducted to investigate the technical factors of Cuervo forward straight vaults with single twist, single and half twists, and double twists actually performed by three execellent male gymnasts participated in artistic gymnastics competition of 2003 summer Universiade in Daegu and the 85th National Sports Festival in Cheongju. To accomplish the research goals the Cuervo vaults of three gymnasts were filmed by using three digital camcorders set by 60 Hz, and data were collected through the DLT method of three dimensional cinematography. The kinematic and kinetic variables as each phasic time, CM displacement velocity, release angle inclination angle hip joint angle landing angle, average horse reaction force average moment arm average torque, whoe body's total remote local angular momentum were analyzed, so the following conclusions were reached. Generally to perform the better Cuervo vault, a gymnast should touch down on the board with the great horizontal velocity of the whole body through the fast run-up, and touch down on the horse by decreasing the horizontal displacement of the whole body during the preflight, so raise CM height gradually within a short horse contact time. He should increase the horse reaction force through checking the horizontal velocity of the whole body effectively and the inclination angular displacement of the handstand, if so he can have the large vertical velocity of the whole body. By using the acquired the velocity and the angular momentum of the whole body, he can vault himself higher and twist sufficiently, then he can get better if the body could be tilted by swinging both arms and perform the cat twist with a little flexions at hip joints. According to the above outcomes we can judge that the best athletes is LuBin, the better is YTY, and the next is JSM.

• 재활복지공학회논문지
• /
• 제8권1호
• /
• pp.47-55
• /
• 2014

컴퓨터 대체접근 기기는 장애로 인해 컴퓨터 사용이 힘든 장애인들이 컴퓨터를 사용할 수 있도록 보조하는 기기이며, 이러한 기기들은 대부분 컴퓨터에 유선으로 연결하거나 S/W 프로그램을 설치하여 사용하게 된다. 대부분의 이러한 기기들은 공간적인 제한이 존재하게 되기 때문에 장애인들에게 다양하고 자유로운 컴퓨터 접근을 보장할 수 없으며 다소 불편함을 감수하게 된다. 본 논문에서는 지체장애인 및 뇌병변장애인이 언제, 어디서든 상지의 소근육 운동만으로 컴퓨터에 접근 가능한 안드로이드 기반의 컴퓨터 대체접근 마우스를 개발하였다. 개발된 마우스는 스마트기기에 사용자가 입력하는 포인트를 인식하여 이를 마우스 커서 위치로 변환하고 이를 스마트기기에 내장된 블루투스 통신을 이용하여 컴퓨터로 전달하게 된다. 또한 사용자의 피로도를 줄여 줄 수 있는 그룹스캐닝 방식을 이용하여 가벼운 터치를 이용해서 원하는 버튼을 선택하도록 함으로써 클릭, 더불클릭 및 드래그 앤 드롭 기능을 사용할 수 있도록 하였다. 개발된 컴퓨터 대체 접근 마우스는 지체 및 뇌병변장애인이 간단한 터치 한번으로 컴퓨터 사용이 가능하고, 휴대성이 좋아 시간적, 공간적 제약 없는 장애인의 컴퓨터에 접근에 이용될 것이다.

• 한국해양공학회지
• /
• 제26권3호
• /
• pp.61-65
• /
• 2012

Air-water flow measurements are of importance for the coastal and ocean engineering fields. Although kinematic investigations of the multi-phase flows have been conducted for long time, velocity measurements still are concerned with many researchers and engineers in coastal and ocean areas. In the present study, an imaging technique using shadowgraphy and fiber optic probe for velocity measurements of air bubbles is introduced. The shadow graphy image technique is modified from the typical image velocimetry methods, and optical fibers are used for the well-known intrusive coupled phase-detection probe system. Since the imaging technique is a non-intrusive optical method from the air, it is usually applied for 2D flows. On the other hand, the double fiber optic probes touch flows regardless of flow patterns. The results of the flow measurements by both methods are compared and discussed. The methods are also applied to the measurements of overtopping flows by a breaking wave over the structure fixed on the free surface.

• 한국표면공학회지
• /
• 제45권2호
• /
• pp.81-88
• /
• 2012

Probe tip, which should have not only superior electrical characteristics but also good abrasion resistance for numerous contacts with semiconductor pads to confirm their availability, is essential for MEMS probe card. To obtain good durability of probe tip, it needs thick and crack-free rhodium layer on the tip. However, when the rhodium thickness deposited by electroplating increased, unwanted cracks by high internal stress led to serious problem of MEMS probe tip. This article reported the method of thick Rh deposition with Au buffer layer on the probe tip to overcome the problem of high internal stress and studied mechanical and electrical properties of that. MEMS probe tip with double-Rh layer had good contact resistance and durability during long term touch downs.

• 한국의류산업학회지
• /
• 제22권5호
• /
• pp.686-695
• /
• 2020

The present study evaluated the manual dexterity and usability of conductive gloves when operating touchscreen devices in the cold. Twelve male subjects (23.3±1.5 years in age) participated in three experimental conditions: no gloves, fabric conductive and lambskin conductive gloves. Manual dexterity was tested using both Purdue Pegboard (PP) and ASTM dexterity tests at an air temperature of 5℃ and air humidity of 30%RH. Glove usability was tested through the following touchscreen tests: tap, double tap, long tab, drag, flick, and multi-touch. The results showed that manual dexterity according to the PP (2.5 mm of a pin diameter) and ASTM tests (8 mm of a stick diameter) was worse for the two glove conditions than for the no glove condition (p<.005). PP dexterity was better for the fabric glove condition than for the lambskin glove condition (p<.05); however, there was no difference in ASTM dexterity between the two glove conditions. Hand and finger skin temperatures were higher for the glove conditions than the bare hand condition (p<.05), with no differences between the two glove conditions. The touchscreen usability was the best for the no glove condition, followed by fabric gloves (p<.05). Wearing either fabric or lambskin gloves diminishes hand dexterity while maintaining hand and finger temperatures at higher levels. For improved hand dexterity in dealing with small numbers, letters on a touchscreen in cold environments, we recommend wearing fabric conductive gloves rather than lambskin conductive gloves.

• 한국멀티미디어학회논문지
• /
• 제13권2호
• /
• pp.316-323
• /
• 2010

본 논문에서는 증강현실 응용을 위한 손 끝점 추출과 손 동작 인식 기법을 제안한다. 먼저 RGB 컬러 영역에서 HSV 컬러 영역으로 영상을 변환하고, H, S 값에 대한 이중 임계값과 영역 확장 기법, 연결 요소 분석을 이용한 손을 분할한다. 다음으로 가상 키보드와 마우스의 입력을 위해서 모폴로지 연산과 감산을 통하여 검지와 엄지 손가락 끝점을 추출한다. 마지막으로 마우스 버튼 클릭의 역할을 하기 위하여 손바닥의 무게중심점에 대한 엄지와 검지 손가락 끝점의 각도를 계산하여 엄지와 검지 손가락의 떨어지고, 붙는 동작을 인식한다. 다양한 입력 영상들에 대한 실험 결과는 제안 기법이 고속으로 정확하게 손을 분할하고, 손 끝점을 추출하여 손 동작을 인식할 수 있음을 보여주었다. 제안 기법은 증강 현실 응용을 위한 정보 입력 인터페이스로 사용될 수 있다.