• 대한조선학회논문집
• /
• 제37권1호
• /
• pp.118-126
• /
• 2000

저자들에 의해 기 제안한 바 있는 일반화 경사처짐법을 이용하여 이중 선각 유조선의 최적 구조 설계 시스템을 개발하였다. 최적화 기법으로는 직접탐색법의 일종인 Hooke와 Jeeves 방법을 사용하여 이산화변수를 용이하게 처리할 수 있도록 하였다. 일반화 경사처짐법과 최적화 기법을 결합하여 선급규정에 의한 종강도 부재의 최소 중량 설계프로그램과 일반화 경사처짐법에 의한 횡강도 부재 및 횡격벽 부재의 최소 중량 설계 프로그램을 개발하였다. 개발한 프로그램을 이용하여 tank 배치를 고려한 이중 선각 유조선의 최적 구조 설계를 수행하여 실적선의 설계 치수 및 선각 중량과 비교하였으며, 최소 중량을 주는 tank 배치와 tank type을 결정할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제42권4호
• /
• pp.531-549
• /
• 2012

Numerous oil tanker losses have been reported and one of the possible causes of such casualties is caused by the structural failure of aging ship hulls in rough weather. In aging ships, corrosion and fatigue cracks are the two most important factors affecting structural safety and integrity. This research is about effect on hull girder ultimate strength behavior of double hull oil tanker according to corrosion after Part I: stiffened panel. Based on corrosion data of Part I (time-dependent corrosion wastage model and CSR corrosion model), when progressing corrosion of fourtypes of double hull oil tankers (VLCC, Suezmax, Aframax, and Panamax), the ultimate strength behavior of hull girder is compared and analyzed. In case of the ultimate strength behavior of hull girder, when occurring corrosion, the result under vertical and horizontal bending moment is analyzed. The effect of time-dependent corrosion wastage on the ultimate hull girder strength as well as the area, section modulus, and moment of inertia are also studied. The result of this research will be useful data to evaluate ultimate hull girder strength of corroded double hull oil tanker.

• Journal of Hydrospace Technology
• /
• 제1권1호
• /
• pp.89-110
• /
• 1995

The enactment of OPA90 (Oil Pollution Act of 1990) in the USA and the consequent moves by IMO(International Maritime Organization) to introduce new Regulations for the design of oil tankers led the oil transportation industry to undergo a period of big change. This resulted in the introduction of double hull tankers. This paper introduces the design for the 300, 000 DWT double hull VLCC of World-Wide Shipping Agency Pte Ltd. in Hong Kong, which is the first of this type constructed by Daewoo Shipbuilding & Heavy Machinery Ltd.(DSHM). The characteristics of the compartment and structural arrangement of this vessel are briefly described, and the scope of structural analysis is illustrated. In addition, the merits/demerits of different crosstie arrangements are described in the appendices.

• Structural Engineering and Mechanics
• /
• 제42권4호
• /
• pp.507-530
• /
• 2012

Age-related problems especially corrosion and fatigue are normally suffered by weatherworn ships and aging offshore structures. The effect of corrosion is one of the important factors in the Common Structural Rule (CSR) guideline of the ship design based on a 20 or 25 years design life. The aim of this research is the clarification of the corrosion effect on ultimate strength of stiffened panels on various types of double hull oil tankers. In the case of ships, corrosion is a phenomenon caused by the ambient environment and it has different characteristics depending on the parts involved. Extensive research considering these characteristic have already done by previous researchers. Based on this data, the ultimate strength behavior of stiffened panels for four double hull oil tankers such as VLCC, Suezmax, Aframax, and Panamax classes are compared and analyzed. By considering hogging and sagging bending moments, the stiffened panels of the deck, inner bottom and outer bottom located far away from neutral axis of ship are assessed. The results of this paper will be useful in evaluating the ultimate strength of an oil tanker subjected to corrosion. These results will be an informative example to check the effect of ultimate strength of a stiffened panel according to corrosion addition from CSR for a given type of ship.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.245-253
• /
• 1998

Recently, the importance of multi-objective optimization techniques and stochastic search methods is increasing. The stochastic search methods have the concepts of the survival of the fittest and natural selection such as genetic algorithms(GA), simulated annealing(SA) and evolution strategies (ES). As many accidents of oil tankers cause marine pollution, oil tankers of double hull or mid deck structure are being built to minimize the marine pollution. For the improvement of oil tanker design technique, an efficient optimization technique is proposed in this study. Multi-objective optimization problem of weight and cost of double hull and mid deck tanker is formulated. Discrete design variables are used considering real manufacturing, and the concept of relative production cost is also introduced. The ES method is used as an optimization technique, and the ES algorithm was developed to generate a more efficient Pareto optimal set.

• 대한조선학회논문집
• /
• 제37권2호
• /
• pp.100-108
• /
• 2000

근년에 들어 미국 의회와 국제 해사 기구에서 해양 오염 방지를 위해 기존의 MARPOL73/78 규정을 대폭 강화함에 따라 이중 선각 유조선이나 중간 갑판 유조선 등 새로운 선형의 개발이 필요하게 되었다. 지금까지 대부분의 연구가 선박의 충돌 사고시 유출되는 기름량에 관심이 있었지만 본 연구에서는 이들 선형간의 구조적인 특성을 비교하여 보다 효율적인 선형을 제시하기 위해 이중 선각 유조선과 중간 갑판 유조선의 구조 설계를 수행할 수 있는 프로그램을 개발하였다. 개발한 프로그램을 이용하여 화물창 배치를 고려한 이중 선각 유조선과 중간 갑판 유조선의 최적 구조 설계를 수행하여 설계 치수 및 선각 중량을 상호 비교하였으며, 최소 중량을 주는 효율적인 선형을 제시하였다.

• 대한조선학회논문집
• /
• 제46권4호
• /
• pp.398-408
• /
• 2009

Crude oil carriers or product oil carriers are confronted with sea pollution due to hull damage from various accidents. To reduce the oil spillage of tankers, IMO(International Maritime Organization) and OPA 90(Oil Pollution Act 1990) adopted the hull structures of double skin type. In this study, oil spillage test of the double skin tanker with 1/100 scaled model was carried out under damaged condition due to collision and grounding accidents. A new structural type of oil tanker was also tested with pipe and valve system arranged in double side and single bottom hulls. Their results were compared with that of conventional type double hull on the view point of ship safety and oil spillage.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권3호
• /
• pp.507-528
• /
• 2014

In the ship and offshore structure design, age-related problems such as corrosion damage, local denting, and fatigue damage are important factors to be considered in building a reliable structure as they have a significant influence on the residual structural capacity. In shipping, corrosion addition methods are widely adopted in structural design to prevent structural capacity degradation. The present study focuses on the historical trend of corrosion addition rules for ship structural design and investigates their effects on the ultimate strength performance such as hull girder and stiffened panel of double hull oil tankers. Three types of rules based on corrosion addition models, namely historic corrosion rules (pre-CSR), Common Structural Rules (CSR), and harmonised Common Structural Rules (CSR-H) are considered and compared with two other corrosion models namely UGS model, suggested by the Union of Greek Shipowners (UGS), and Time-Dependent Corrosion Wastage Model (TDCWM). To identify the general trend in the effects of corrosion damage on the ultimate longitudinal strength performance, the corrosion addition rules are applied to four representative sizes of double hull oil tankers namely Panamax, Aframax, Suezmax, and VLCC. The results are helpful in understanding the trend of corrosion additions for tanker structures.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2015년도 특별논문집
• /
• pp.46-49
• /
• 2015

Common Structural Rules (CSR) about bulk carriers and double-hull oil tankers of International Association of Classification Societies (IACS) has been applied to ships contracted for construction since April 2006. By unifying each society's rules, the difference of opinion in the between shipyard and ship owners, classification was reduced, and CSR has been evaluated by rules the safety structure more enhanced. However, The CSR about the bulk carriers and double hull oil tankers, important design content standards, such as the local scantling calculation, static/dynamic load case and corrosion margin and etc., are different. Therefore in order to combine the CSR, the Harmonized CSR for bulk carriers and double hull oil tankers (H-CSR) was issued on 1, January, 2014, and will be apply to ships contracted for construction after 1st July 2015. It is necessary to verify the H-CSR to optimize the structural arrangement because effective date is not far off. In this study, we compared the impact by rule change for the hull girder shear strength of bulk carriers between CSR and H-CSR in respect of the yielding and buckling strength.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제5권1호
• /
• pp.47-61
• /
• 2013

This study compares the Residual ultimate longitudinal strength - grounding Damage index (R-D) diagrams produced by two analysis methods: the ALPS/HULL Intelligent Supersize Finite Element Method (ISFEM) and the design formula (modified Paik and Mansour) method - used to assess the safety of damaged ships. The comparison includes four types of double-hull oil tankers: Panamax, Aframax, Suezmax and VLCC. The R-D diagrams were calculated for a series of 50 grounding scenarios. The diagrams were efficiently sampled using the Latin Hypercube Sampling (LHS) technique and comprehensively analysed based on ship size. Finally, the two methods were compared by statistically analysing the differences between their grounding damage indices and ultimate longitudinal strength predictions. The findings provide a useful example of how to apply the ultimate longitudinal strength analysis method to grounded ships.