• 한국태양에너지학회 논문집
• /
• 제39권5호
• /
• pp.65-78
• /
• 2019

In this study, we investigated the paraffin encapsulation using double-walled encapsulation technique. The first encapsulation used methyl methacrylic acid as the main component in acrylic polymer and the second encapsulation used melamine polymer. Particles size and distribution of the capsules were analyzed using scanning electron microscopy. In the first encapsulation, the stable capsules were obtained at 67% of phase change material ratio to methyl methacrylic acid monomer and the size of the capsule was from 0.2 to $0.3{\mu}m$. In the second encapsulation, the size of the capsules was almost the same with those capsules prepared in the first encapsulation. The particle size of single wall and double wall was about $0.3{\mu}m$. As a result of the encapsulation of paraffin using double-walled encapsulation technique, it was confirmed that the particle size was determined in the process of encapsulating using the acrylic polymer at the first wall material, and the physical and thermal stability of the capsules were imparted using melamine at the secondary wall material.

• 정보보호학회논문지
• /
• 제28권2호
• /
• pp.449-456
• /
• 2018

불필요한 트래픽의 송수신을 통한 분리된 조직/부서 간의 내부 자료 유출을 방지하기 위해 많은 조직에서 네트워크를 분할하여 망을 관리한다. 물리적으로 별도의 장비를 기반으로 하는 것이 가장 근본적인 네트워크 분할 방식이나 이보다 적은 비용으로 구축이 가능한 가상랜(Virtual LAN, VLAN) 네트워크 접근 제어 기능을 활용하여 논리적으로 네트워크를 분할 운영하는 사례가 존재한다. 본 연구에서는 VLAN ID값을 검색하는 스캐닝 기법과 Double Encapsulation VLAN Hopping 공격기법을 활용해 VLAN을 이용하여 분할된 네트워크 간 통신 우회 가능성을 제시한 후, 스캐닝을 통해 획득한 VLAN ID 정보를 이용한 자료 유출 시나리오를 제시한다. 또한 이 공격을 탐지 및 차단하기 위한 기법을 제안하고 구현을 통해 제시된 기법의 효과에 대해 검증한다. 본 연구는 궁극적으로 VLAN으로 분리된 네트워크 취약점을 활용한 자료 유출 또는 외부 사이버 공격을 차단함으로써 VLAN 이용 환경의 보안성 향상에 기여할 것으로 기대한다.

• KSBB Journal
• /
• 제26권4호
• /
• pp.333-340
• /
• 2011

In this study, gemcitabine-loaded methoxy poly(ethylene glycol)-b-poly(L-lactide) (MPEG-PLLA) microparticles with different PEG block lengths were prepared by a W/O/W double emulsion technique. The present study focuses on the investigation of the influence of various preparative parameters such as the ratio of internal water phase and oil phase, polymer concentration, solvent composition of organic phase and salt concentration of external water phase on the morphology and encapsulation efficiency of the microparticles. The microparticles fabricated at high volume ratios of internal water phase to oil phase and at high polymer concentrations showed a relatively high encapsulation efficiency and low porosity. When a dichloromethane/ethyl acetate mixture was used as solvent, both the encapsulation efficiency and drug loading of the microparticles decreased as the level of ethyl acetate increased. The addition of a salt (NaCl) to the external water phase significantly improved the encapsulation efficiency up to 40%, and the microparticles became more spherical with their size and porosity decreased.

• 한국전기전자재료학회논문지
• /
• 제25권10호
• /
• pp.849-856
• /
• 2012

Chip on board type white light emitting diode on metal core printed circuit board with high thixotropy silicone is fabricated by vacuum printing encapsulation system. Encapsulant is chosen by taking into account experimental results from differential scanning calorimeter, shearing strength, and optical transmittance. We have observed that radiant flux and package efficacy are increased from 336 mW to 450 mW and from 11.9 lm/W to 36.2 lm/W as single dome diameter is varied from 2.2 mm to 2.8 mm, respectively. Double encapsulation structure with 2.8 mm of dome diameter shows further significant enhancement of radiant flux and package efficacy to 667 mW and 52.4 lm/W, which are 417 mW and 34.8 lm/W at single encapsulation structure, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.392-396
• /
• 2014

New organic-inorganic composite of 2,4-dihydroxybenzophenone (BP-1) encapsulation into dodecylbenzenesulfonate (DBS) modified layered double hydroxide (LDH) was successfully prepared. The surface, structural, thermal and absorption properties of the BP-1/DBS-LDH nanohybrid was characterized by BET analysis, scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TG) and diffuse reflectance UV-Vis absorbance spectra (DRUV-vis). The interlayer configuration of composite and the adsorption mechanism of BP-1 on MgAl-DBS-LDH were discussed. It was suspected that DBS anions located in the form of monolayer arrangement with a $75^{\circ}$ anti parallel angle between dodecylbenzenesulfonate chain axis. The diffuse reflectance UV-Vis absorbance results revealed that the UV absorbing wavelength of BP-1/DBS-LDH evidently extends to about 400 nm, which shows that the BP-1/DBS-LDH has the potential application as a UV absorber.

• 공업화학
• /
• 제35권2호
• /
• pp.115-121
• /
• 2024

본 연구는 W1/O/W2 이중유화법을 통한 마이크로 캡슐화 공정을 최적화하기 위해 역미셀(reverse micelle), salt 농도 등의 열역학적 변수와 유체의 점도, 계면장력 등 계면의 유동에 영향을 미치는 공정변수들의 영향성을 분석하였다. 아스코르브산의 PLA (polylactic acid) 미립자 내부로의 캡슐화 효율에 가장 큰 영향을 미치는 변수는 W1과 W2상의 삼투압의 차이로 W2상의 salt 농도를 높이거나, W1상의 아스코르브산 농도를 줄이면 캡슐화 효율이 높아짐을 관찰하였다. 또한, 삼투압의 차이가 클수록 미립자 표면의 손상이 심해짐을 확인할 수 있었다. 캡슐화 효율을 높일 것으로 예상되었던 역미셀 도입은 그 기여도가 낮거나 오히려 캡슐화 효율을 낮추었다. 마이크로캡슐의 수율은 공정 조건, 용액 조성 등과 상관없는 universal 함수로 표현하였는데, Ca > 20에서는 더 이상의 수율 증가가 관찰되지 않았다.

• Journal of Information Display
• /
• 제5권3호
• /
• pp.30-34
• /
• 2004

Fabrications of barrier layer on a polyethersulfon (PES) film and OLED based on a plastic substrate by atomic layer deposition (ALD) have been carried out. Simultaneous deposition of 30 nm of $AlO_x$ film on both sides of PES film gave film MOCON value of 0.0615 g/$m^2$/day (@38$^{\circ}C$, 100 % R.H.). Moreover, the double layer of 200 urn $SiN_x$ film deposited by PECVD and 20 nm of $AlO_x$ film by ALD resulted in the MOCON value lower than the detection limit of MOCON. The OLED encapsulation performance of the double layer have been investigated using the OLED structure of ITO/MTDATA(20 nm)/NPD(40 nm)/AlQ(60 nm)/LiF(1 nm)/Al(75 nm) based on the plastic substrate. Preliminary life time to 91 % of initial luminance (1300 cd/$m^2$) was 260 hours for the OLED encapsulated with 100 nm of PECVD deposited $SiN_x$/30 nm of ALD deposited $AlO_x$.

• 정보처리학회논문지C
• /
• 제10C권4호
• /
• pp.519-524
• /
• 2003

본 논문은 방화벽에 독립적인 IPv6 터널링 기법의 연구에 관한 것이다. IPv4망의 인프라를 유지하면서 점진적으로 IPv6망을 확대해 나가고 있는 철재, IPv6망간의 연동을 위해서 터널링을 널리 사용하고 있으나 방화벽에 의해 IPv4로 캡슐화된 패킷이 방화벽을 통과하지 못하는 문제점이 확인되었다. 즉, 방화벽 내부의 사용자들은 IPv6망의 접속에 제한을 받게 되며 방화벽 없이 IPv6망을 구축해야 한다. 본 논문에서는 방화벽에 의해 캡슐화된 패킷이 차단되는 것을 해결하기 위한 방법으로 Double-encapsulation 방식과 HTTP 터널링 기법을 응용한 방식을 제안하였으며 실험결과 패킷 차단없이 IPv6망간의 연동이 이루어짐을 확인하였다.

• 대한화장품학회지
• /
• 제21권1호
• /
• pp.84-94
• /
• 1995

본 연구는 향장향이 갖고 있는 단점과 우려(피부알러지, 자극, 향의 지속성 결여)를 개선, 보완하고자 향료를 B-Capsulation 혼합물을 스프레이 드라이법을 사용하여 분말향료를 얻었으며, GC, IR, UV 관능법으로 분석하였다.

• ETRI Journal
• /
• 제27권5호
• /
• pp.545-550
• /
• 2005

We have carried out the fabrications of a barrier layer on a polyethersulfon (PES) film and organic light emitting diode (OLED) based on a plastic substrate by means of atomic layer deposition (ALD). Simultaneous deposition of 30 nm $AlO_x$ film on both sides of the PES film gave a water vapor transition rate (WVTR) of $0.062 g/m^2/day (@38^{\circ}C,\;100%\;R.H.)$. Further, the double layer of 200 nm $SiN_x$ film deposited by plasma enhanced chemical vapor deposition (PECVD) and 20 nm $AlO_x$ film by ALD resulted in a WVTR value lower than the detection limit of MOCON. We have investigated the OLED encapsulation performance of the double layer using the OLED structure of ITO / MTDATA (20 nm) / NPD (40 nm) / AlQ (60 nm) / LiF (1 nm) / Al (75 nm) on a plastic substrate. The preliminary life time to reach 91% of the initial luminance $(1300 cd/m^2)$ was 260 hours for the OLED encapsulated with 100 nm of PECVD-deposited $SiN_x$ and 30 nm of ALD-deposited $AlO_x$.